The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Learning and optimization of machining operations using computing abilities of neural networks
Abstract
The authors present a scheme that uses a feedforward neural network for the learning and synthesis task. Neural networks consist of a collection of interconnected processors that compute in parallel. The parallelism allows the network to examine various constraints simultaneously during the learning phase and enables reductions in computing time that are attractive in real-time applications. The learning abilities of these networks in a tuning operation are discussed. The network learns by observing the effect of the input variables of the operation (such as feed rate, depth of cut, and cutting speed) on the output variables (such as cutting force, power, temperature, and surface finish of the workpiece). The learning phase is followed by a synthesis phase during which the network predicts the input conditions to be used by the machine tool to maximize the metal removal rate subject to appropriate operating constraints.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neural networks and physical systems with emergent collective computational abilities.
Hopfield, J. J. (1982) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.79.8.2554 · Cited by 19,270
Hopfield, J. J. (1984) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.81.10.3088 · Cited by 6,918
Kohonen, T. (1977) · Communication and Cybernetics · doi:10.1007/978-3-642-96384-1 · Cited by 469
Cited by
Tool Condition Monitoring (TCM) — The Status of Research and Industrial Application
Byrne, G., Dornfeld, D., Inasaki, I., Ketteler, G., König, W., & Teti, R. (1995) · CIRP Annals · doi:10.1016/s0007-8506(07)60503-4 · Cited by 737
Self-citationAgent-Based Systems for Manufacturing
Monostori, L., Váncza, J., & Kumara, S. R. T. (2006) · CIRP Annals · doi:10.1016/j.cirp.2006.10.004 · Cited by 689
Determination of optimal cutting parameters in wire electrical discharge machining
Tarng, Y. S., Ma, S. C., & Chung, L. K. (1995) · International Journal of Machine Tools and Manufacture · doi:10.1016/0890-6955(95)00019-t · Cited by 270
The CRC Handbook of Mechanical Engineering
(2004) · CRC Press eBooks · doi:10.1201/9781420041583 · Cited by 260
Metadata
- Authors
- Rangwala, S. S., & Dornfeld, D. A.
- Venue
- IEEE Transactions on Systems, Man, and Cybernetics
- Published
- 1989
- Volume
- 19
- Issue
- 2
- Pages
- 299-314
- ISSN
- 0018-9472 (ISSN-L)
- OpenAlex
- W2046981399
- Cited by
- 171
- References
- 3
- FWCI
- 25.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.