The DOI matches its Crossref record.
Five-level GTO inverters for large induction motor drives
Abstract
The development of large induction motor drives with low torque ripple and fast dynamic response for new or retrofit applications has been limited by the device ratings and problems of series connections. This paper investigates the use of a five-level GTO voltage-sourced inverter for large induction motor drives. The advantages of such a drive are that single GTO thyristors may be used at each level, thereby avoiding the need for series connection of the thyristors. The thyristors are well protected from overvoltages by the clamping action of the DC supply capacitors. The disadvantages are that each DC level requires a separate supply, four in the case of the five-level inverter, and that the devices are not equally loaded. This paper reviews the basic operation of the five-level inverter and possible PWM voltage/frequency control techniques for the specific application of induction motor drives. The simulation results clearly show the unequal loading of the devices and the need for independent voltage supplies for the five levels. It is shown that a combination of several PWM techniques offers the best solution for the drives application. The conclusions indicate that large induction motors with ratings up to 22 MVA, 7.46 kV may be supplied by the five-level inverter using available 4.5 kV, 3.0 kA GTO thyristors. The recommended supply for such an inverter with full regenerative operation over the complete speed range is four, four-quadrant converters in a quasi-24-pulse configuration.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Multilevel converters for large electric drives
Tolbert, L. M., Peng, F. Z., & Habetler, T. G. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.740843 · Cited by 1,408
Charge balance control schemes for cascade multilevel converter in hybrid electric vehicles
Tolbert, L. M., Peng, F. Z., Cunnyngham, T., & Chiasson, J. N. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.803213 · Cited by 381
A hybrid multilevel inverter topology for drive applications
Manjrekar, M. D., & Lipo, T. A. (2002) · APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1998.653825 · Cited by 354
Control of a multilevel converter using resultant theory
Chiasson, J. N., Tolbert, L. M., McKenzie, K. J., & Du, Z. (2003) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2003.810382 · Cited by 329
Son, G. T., Lee, H.-J., Nam, T. S., Chung, Y.-H., Lee, U.-H., Baek, S.-T., Hur, K., & Park, J.-W. (2012) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2012.2190530 · Cited by 290
Metadata
- Authors
- Menzies, R. W., Steimer, P., & Steinke, J. K.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1994
- Volume
- 30
- Issue
- 4
- Pages
- 938-944
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W4248268569
- Cited by
- 194
- References
- 0
- FWCI
- 0.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Five-level GTO inverters for large induction motor drives. https://app.cochat.ai/papers/10.1109/28.297910
- The paper
- Menzies, R. W., Steimer, P., & Steinke, J. K. (1994). Five-level GTO inverters for large induction motor drives. IEEE Transactions on Industry Applications. https://doi.org/10.1109/28.297910
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.