The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effects of time-varying loads on rotor fault detection in induction machines
Abstract
The authors address the problem of motor current spectral analysis for the detection of nonidealities in the airgap flux density in the presence of an oscillation or position-varying load torque. An analysis of the effects of position-varying loads on the current harmonic spectrum is presented. The load torque-induced harmonics are shown to be coincidental with rotor fault-induced harmonics when the load varies synchronously with the rotor position. Since the effect of the load and fault on a single stator current harmonic component is spatially dependent, the fault-induced portion cannot be separated from the load portion. Therefore, an online detection scheme which measures the spectrum of a single-phase current must rely on monitoring those spectral components which are not affected by the load torque oscillations. With this in mind, the detection of broken bars is still possible, since the current typically contains higher order harmonics than those induced by the load. >
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noninvasive detection of broken rotor bars in operating induction motors
Kliman, G. B., Koegl, R. A., Stein, J., Endicott, R. D., & Madden, M. W. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.9364 · Cited by 525
Vibration and current monitoring for detecting airgap eccentricity in large induction motors
Cameron, J. R., Thomson, W. T., & Dow, A. B. (1986) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1986.0022 · Cited by 512
Filippetti, F., Martelli, M., Franceschini, G., et al. (2003) · doi:10.1109/ias.1992.244459 · Cited by 149
Cited by
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
Self-citationMotor bearing damage detection using stator current monitoring
Schoen, R. R., Habetler, T. G., Kamran, F., & Bartheld, R. G. (2002) · Proceedings of 1994 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1994.345491 · Cited by 638
Self-citationA survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Self-citationWhat stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis
Blodt, M., Chabert, M., Regnier, J., & Faucher, J. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.882631 · Cited by 267
Monitoring gear vibrations through motor current signature analysis and wavelet transform
Kar, C., & Mohanty, A. R. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.07.006 · Cited by 254
Frosini, L., & Bassi, E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026770 · Cited by 254
Detecting faults in rotors of PM drives
Roux, W., Harley, R., & Habetler, T. (2008) · IEEE Industry Applications Magazine · doi:10.1109/mia.2007.915789 · Cited by 48
Self-citation
Metadata
- Authors
- Schoen, R. R., & Habetler, T. G.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1995
- Volume
- 31
- Issue
- 4
- Pages
- 900-906
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2141728955
- Cited by
- 272
- References
- 3
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.