The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Space vector modulated three-phase to three-phase matrix converter with input power factor correction
Abstract
Analysis, design, and implementation of the space vector modulated three-phase to three-phase matrix converter with input power factor correction are presented. The majority of published research results on the matrix converter control are given an overview, and the one which employs simultaneous output-voltage and input-current space vector modulation, is systematically reviewed. The modulation algorithm is theoretically derived from the desired average transfer functions, using the indirect transfer function approach. The algorithm is verified through implementation of a 2 kVA experimental matrix converter driving a standard induction motor as a load. The switching frequency is 20 kHz. The modulator is implemented with a digital signal processor. The resultant output voltages and input currents are sinusoidal, practically without low-frequency harmonics. The input power factor is above 0.99 in the whole operating range.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Use of Harmonic Distortion to Increase the Output Voltage of a Three-Phase PWM Inverter
Houldsworth, J. A., & Grant, D. A. (1984) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1984.4504587 · Cited by 388
Safe control of four-quadrant switches
Burany, N. (2003) · Conference Record of the IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1989.96794 · Cited by 262
Implementation of a controlled rectifier using AC-AC matrix converter theory
Holmes, D. G., & Lipo, T. A. (1992) · IEEE Transactions on Power Electronics · doi:10.1109/63.124596 · Cited by 207
Cited by
Matrix converters: a technology review
Wheeler, P. W., Rodriguez, J., Clare, J. C., Empringham, L., & Weinstein, A. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.993260 · Cited by 1,968
A Review of Control and Modulation Methods for Matrix Converters
Rodriguez, J., Rivera, M., Kolar, J. W., & Wheeler, P. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165310 · Cited by 604
Survey on Fault-Tolerant Techniques for Power Electronic Converters
Zhang, W., Xu, D., Enjeti, P. N., Li, H., Hawke, J. T., & Krishnamoorthy, H. S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2304561 · Cited by 587
Novel Three-Phase AC–AC Sparse Matrix Converters
Kolar, J. W., Schafmeister, F., Round, S. D., & Ertl, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904178 · Cited by 442
System Harmonic Interaction Between DC and AC Adjustable Speed Drives and Cost Effective Mitigation
Lee, K., Carnovale, D., Young, D., Ouellette, D., & Zhou, J. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2562006 · Cited by 13
Metadata
- Authors
- Huber, L., & Borojevic, D.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1995
- Volume
- 31
- Issue
- 6
- Pages
- 1234-1246
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W1982137082
- Cited by
- 967
- References
- 3
- FWCI
- 2.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.