The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Effect of PWM inverters on AC motor bearing currents and shaft voltages
Abstract
This paper investigates AC induction motor shaft voltage problems, current flow through motor bearings and electric discharge current problems within bearings when operated under both pure sinewave and pulse width modulated (PWM) inverter sources. Experience suggests that PWM voltage sources with steep wavefronts especially increase the magnitude of the above electrical problems, leading to motor bearing material erosion and early mechanical failure. Previous literature suggests that shaft voltage-bearing current problems under 60 Hz sinewave operation are predominantly electromagnetically induced. It is proposed that under PWM operation these same problems are now predominantly an electrostatic phenomenon. A system model to describe this phenomenon is characterized and developed. Construction and test of a new electrostatic shielded induction motor (ESIM) verifies this model and is also a possible solution to the bearing current problem under PWM operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shaft voltages in generators with static excitation systems-problems and solution
Ammann, C., Reichert, K., Joho, R., & Posedel, Z. (1988) · IEEE Transactions on Energy Conversion · doi:10.1109/60.4749 · Cited by 87
Prashad, H. (1992) · Journal of Tribology · doi:10.1115/1.2920954 · Cited by 19
Cited by
Multilevel converters for large electric drives
Tolbert, L. M., Peng, F. Z., & Habetler, T. G. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.740843 · Cited by 1,408
Multilevel inverter modulation schemes to eliminate common-mode voltages
Wang, F., Wallace, A. K., Dai, S., Von Jouanne, A., & Zhang, H. (2000) · IEEE Transactions on Industry Applications · doi:10.1109/28.887217 · Cited by 474
An active circuit for cancellation of common-mode voltage generated by a PWM inverter
Ogasawara, S., Ayano, H., & Akagi, H. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.712285 · Cited by 394
Charge balance control schemes for cascade multilevel converter in hybrid electric vehicles
Tolbert, L. M., Peng, F. Z., Cunnyngham, T., & Chiasson, J. N. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.803213 · Cited by 381
Control of a multilevel converter using resultant theory
Chiasson, J. N., Tolbert, L. M., McKenzie, K. J., & Du, Z. (2003) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2003.810382 · Cited by 329
Electrical bearing failures in electric vehicles
He, F., Xie, G., & Luo, J. (2020) · Friction · doi:10.1007/s40544-019-0356-5 · Cited by 303
Hava, A. M., & Ün, E. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2100100 · Cited by 292
Multilevel inverters for electric vehicle applications
Tolbert, L. M., Peng, F. Z., & Habetler, T. G. (2002) · Power Electronics in Transportation (Cat. No.98TH8349) · doi:10.1109/pet.1998.731062 · Cited by 204
Metadata
- Authors
- Erdman, J. M., Kerkman, R. J., Schlegel, D. W., & Skibinski, G. L.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1996
- Volume
- 32
- Issue
- 2
- Pages
- 250-259
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2565537996
- Cited by
- 738
- References
- 2
- FWCI
- 11.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.