The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Fault-tolerant control in dynamic systems: application to a winding machine
Abstract
The general fault-tolerant control method described in the article addresses actuator and sensor faults, which often affect highly automated systems. These faults correspond to a loss of actuator effectiveness or fault sensor measurements. After describing these faults, a fault estimation and compensation method was proposed. In addition to providing information to operators concerning the system operating conditions, the fault diagnosis module is especially important in fault-tolerant control systems where one needs to know exactly which element is faulty to react safely. The method's abilities to compensate for such faults are illustrated by applying it to a winding machine, which represents a subsystem of many industrial systems. The results show that once the fault is detected and isolated, it is easy to reduce its effect on the system, and process control is resumed with degraded performances close to nominal ones. Thus, stopping the system immediately can be avoided. However, the limits of this method are reached when there is the complete loss of an actuator. In this case, only a hardware redundancy is effective and could ensure performance reliability. The method proposed here assumes the availability of the state variables for measurement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Detection of Abrupt Changes: Theory and Application
Riedel, K. S. (1994) · Technometrics · doi:10.1080/00401706.1994.10485821 · Cited by 3,518
Process fault detection based on modeling and estimation methods—A survey
Isermann, R. (1984) · Automatica · doi:10.1016/0005-1098(84)90098-0 · Cited by 2,364
A survey of design methods for failure detection in dynamic systems
Willsky, A. S. (1976) · Automatica · doi:10.1016/0005-1098(76)90041-8 · Cited by 2,153
Analytical redundancy and the design of robust failure detection systems
Chow, E., & Willsky, A. S. (1984) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1984.1103593 · Cited by 1,622
A survey of design methods for failure detection in dynamic systems
(1977) · Microelectronics Reliability · doi:10.1016/0026-2714(77)90326-2 · Cited by 1,421
Detecting changes in signals and systems—A survey
Basseville, M. (1988) · Automatica · doi:10.1016/0005-1098(88)90073-8 · Cited by 806
Design of reliable control systems
Veillette, R. J., Medanic, J., & Perkins, W. (1992) · IEEE Transactions on Automatic Control · doi:10.1109/9.119629 · Cited by 695
Failure accomodation in linear systems through self-reorganization.
Beard, R. V. (1971) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 498
Multivariable adaptive algorithms for reconfigurable flight control
Bodson, M., & Groszkiewicz, J. E. (1997) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.556026 · Cited by 457
Failure detection in linear systems
Jones, H. L. (1973) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 456
Detection filter design: Spectral theory and algorithms
White, J., & Speyer, J. (1987) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1987.1104682 · Cited by 394
Optimally robust redundancy relations for failure detection in uncertain systems
Lou, X.-C., Willsky, A. S., & Verghese, G. C. (1986) · Automatica · doi:10.1016/0005-1098(86)90031-2 · Cited by 386
Reliable State Feedback Control System Design Against Actuator Failures
ZHAO, Q., & JIANG, J. (1998) · Automatica · doi:10.1016/s0005-1098(98)00072-7 · Cited by 372
Stability of the pseudo-inverse method for reconfigurable control systems
Gao, Z., & Antsaklis, P. J. (1991) · International Journal of Control · doi:10.1080/00207179108953643 · Cited by 332
Automated fault detection and accommodation: a learning systems approach
Polycarpou, M. M., & Helmicki, A. J. (1995) · IEEE Transactions on Systems Man and Cybernetics · doi:10.1109/21.467710 · Cited by 311
A Review of Parity Space Approaches to Fault Diagnosis
Patton, R. J., & Chen, J. (1991) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)51124-6 · Cited by 310
Review of parity space approaches to fault diagnosis for aerospace systems
Patton, R. J., & Chen, J. (1994) · Journal of Guidance Control and Dynamics · doi:10.2514/3.21194 · Cited by 247
Autonomous control reconfiguration
Rauch, H. E. (1995) · IEEE Control Systems · doi:10.1109/37.476385 · Cited by 177
Accommodation of failures in the F-16 aircraft using adaptive control
Ahmed-Zaid, F., Ioannou, P., Gousman, K., & ROONEY, R. H. (1991) · IEEE Control Systems · doi:10.1109/37.103360 · Cited by 170
An automatic redesign approach for restructurable control systems
Looze, D. P., Weiss, J. L., Eterno, J. S., & Barrett, N. (1985) · IEEE Control Systems Magazine · doi:10.1109/mcs.1985.1104940 · Cited by 164
Model following reconfigurable flight control system for the AFTI/F-16
Morse, W. D., & Ossman, K. (1990) · Journal of Guidance Control and Dynamics · doi:10.2514/3.20568 · Cited by 147
Leonhardt, S. K., & Ayoubi, M. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00050-6 · Cited by 143
Design of integrated systems for the control and detection of actuator/sensor faults
Stoustrup, J., Grimble, M. J., & Niemann, H. (1997) · Sensor Review · doi:10.1108/02602289710170311 · Cited by 114
Design of restructurable flight control systems using feedback linearization
Ochi, Y., & Kanai, K. (1991) · Journal of Guidance Control and Dynamics · doi:10.2514/3.20730 · Cited by 108
Reconfigurable control system design via perfect model following
Gao, Z., & Antsaklis, P. J. (1992) · International Journal of Control · doi:10.1080/00207179208934343 · Cited by 100
Expert supervision of fuzzy learning systems for fault tolerant aircraft control
Kwong, W. A., Passino, K. M., Laukonen, E. G., & Yurkovich, S. (1995) · Proceedings of the IEEE · doi:10.1109/5.364491 · Cited by 96
Optimal and robust design of integrated control and diagnostic modules
Tyler, M. L., & Morari, M. (2005) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.1994.752439 · Cited by 60
Integrated control, diagnosis and reconfiguration of a heat exchanger
Ballé, P., Fischer, M., Füssel, D., Nelles, O., & Isermann, R. (1998) · IEEE Control Systems · doi:10.1109/37.687620 · Cited by 60
Design of failure-accommodating multiloop LQG-type controllers
Joshi, S. M. (1987) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1987.1104704 · Cited by 50
Robust Observer Design with Application to Fault Detection
Viswanadham, & Minto (1988) · doi:10.1109/acc.1988.4172962 · Cited by 47
Jiang, J., & Zhao, Q. Z. (2002) · doi:10.1109/isic.1998.713655 · Cited by 44
A Robust Design Approach to Integrated Controls and Diagnostics
Murad, G., Postlethwaite, I., & Gu, D.-W. (1996) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)58728-5 · Cited by 40
Cited by
Bibliographical review on reconfigurable fault-tolerant control systems
Zhang, Y., & Jiang, J. (2008) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2008.03.008 · Cited by 2,652
Fault Accommodation for Nonlinear Dynamic Systems
Jiang, B., Staroswiecki, M., & Cocquempot, V. (2006) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2006.878732 · Cited by 781
Fault-tolerant control systems: A comparative study between active and passive approaches
Jiang, J., & Yu, X. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.03.005 · Cited by 658
Fault estimation and accommodation for linear MIMO discrete-time systems
Jiang, B., & Chowdhury, F. N. (2005) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2004.839569 · Cited by 281
Fault Tolerant Flight Control - A Survey
Verhaegen, M., Kanev, S., Hallouzi, R., Jones, C., Maciejowski, J., & Smail, H. (2010) · Lecture Notes in Control and Information Sciences · doi:10.1007/978-3-642-11690-2_2 · Cited by 65
Metadata
- Venue
- IEEE Control Systems
- Published
- 2000-02
- Volume
- 20
- Issue
- 1
- Pages
- 33-49
- ISSN
- 1066-033X (ISSN-L)
- 1941-000X
- OpenAlex
- W2013219041
- Cited by
- 278
- References
- 33
- FWCI
- 32.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.