The DOI matches its Crossref record.
Monitoring and diagnosis of rolling element bearings using artificial neural networks
Abstract
Vibration monitoring of components in manufacturing plants involves the collection of vibration data from plant components and detailed analysis to detect features that reflect the operational state of the machinery. The analysis leads to the identification of potential failures and their causes and makes it possible to perform efficient preventive maintenance. Work on the design of a vibration monitoring methodology for rolling element bearings (REB) based on neural network technology is presented. This technology provides an attractive complement to traditional vibration analysis because of the potential of neural networks to operate in real-time mode and to handle data that may be distorted or noisy. The significance of this work relies on the fact that REB failures are responsible for a large fraction of the malfunctions in manufacturing equipment. The technique enhances traditional vibration analysis and provides a means of automating the monitoring and diagnosis of vibrating equipment.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
SAMANTA, B., & AL-BALUSHI, K. R. (2003) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1462 · Cited by 760
Failure diagnosis using deep belief learning based health state classification
Tamilselvan, P., & Wang, P. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2013.02.022 · Cited by 630
PCA-Based Feature Selection Scheme for Machine Defect Classification
Malhi, A., & Gao, R. X. (2004) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2004.834070 · Cited by 579
Sensory-Updated Residual Life Distributions for Components With Exponential Degradation Patterns
Gebraeel, N. (2006) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2006.876609 · Cited by 286
Machine Fault Signature Analysis
Jayaswal, P., Wadhwani, A. K., & Mulchandani, K. B. (2008) · International Journal of Rotating Machinery · doi:10.1155/2008/583982 · Cited by 111
“The neural network technology provides an attractive complement to traditional vibration analysis because of the potential of neural networks to operate in real-time mode and to handle data that may be distorted or noisy [29].”
BackgroundSupport vector classification for fault diagnostics of an electrical machine
Poyhonen, S., Negrea, M., Arkkio, A., Hyotyniemi, H., & Koivo, H. (2003) · 6th International Conference on Signal Processing, 2002. · doi:10.1109/icosp.2002.1180133 · Cited by 20
Metadata
- Authors
- Alguindigue, I. E., Loskiewicz-Buczak, A., & Uhrig, R. E.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 1993-04
- Volume
- 40
- Issue
- 2
- Pages
- 209-217
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2132658574
- Cited by
- 175
- References
- 0
- FWCI
- 5.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.