The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Implementation of a DSP-controlled photovoltaic system with peak power tracking
Abstract
Photovoltaic systems normally use a maximum power point tracking (MPPT) technique to continuously deliver the highest possible power to the load when variations in the insulation and temperature occur. It overcomes the problem of mismatch between the solar arrays and the given load. A simple method of tracking the maximum power points (MPPs) and forcing the system to operate close to these points is presented. The principle of energy conservation is used to derive the large- and small-signal model and transfer function. By using the proposed model, the drawbacks of the state-space-averaging method can be overcome. The TI320C25 digital signal processor (DSP) was used to implement the proposed MPPT controller, which controls the DC/DC converter in the photovoltaic system. Simulations and experimental results show excellent performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions
Hussein, K. H. (1995) · IEE Proceedings - Generation, Transmission and Distribution · doi:10.1049/ip-gtd:19951577 · Cited by 1,764
A general unified approach to modelling switching-converter power stages
MIDDLEBROOK, R. D., & ĆUK, S. (1977) · International Journal of Electronics · doi:10.1080/00207217708900678 · Cited by 1,424
Dynamic Behavior of a Class of Photovoltaic Power Systems
Wasynezuk, O. (1983) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1983.318109 · Cited by 362
Sullivan, C. R., & Powers, M. J. (2002) · Proceedings of IEEE Power Electronics Specialist Conference - PESC '93 · doi:10.1109/pesc.1993.471984 · Cited by 178
Design and Analysis of Microprocessor-Controlled Peak-Power-Tracking System 1
Huynh, P., & Cho, B. (1992) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/929080 · Cited by 72
Cited by
Optimization of Perturb and Observe Maximum Power Point Tracking Method
Femia, N., Petrone, G., Spagnuolo, G., & Vitelli, M. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850975 · Cited by 3,002
Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems
Salas, V., Olías, E., Barrado, A., & Lázaro, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.10.023 · Cited by 1,183
Solar power generation by PV (photovoltaic) technology: A review
Singh, G. K. (2013) · Energy · doi:10.1016/j.energy.2013.02.057 · Cited by 1,123
Comparative study of maximum power point tracking algorithms
Hohm, D. P., & Ropp, M. E. (2003) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.459 · Cited by 865
On the Perturb-and-Observe and Incremental Conductance MPPT Methods for PV Systems
Sera, D., Mathe, L., Kerekes, T., Spataru, S. V., & Teodorescu, R. (2013) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2013.2261118 · Cited by 823
Metadata
- Authors
- Hua, C., Lin, J., & Shen, C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 1998
- Volume
- 45
- Issue
- 1
- Pages
- 99-107
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2116524778
- Cited by
- 706
- References
- 5
- FWCI
- 4.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.