The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Fuel cell systems: efficient, flexible energy conversion for the 21st century
Abstract
At the beginning of the 21st century, fuel cells appear poised to meet the power needs of a variety of applications. Fuel cells are electrochemical devices that convert chemical energy to electricity and thermal energy. Fuel cell systems are available to meet the needs of applications ranging from portable electronics to utility power plants. In addition to the fuel cell stack itself, a fuel cell system includes a fuel processor and subsystems to manage air, water thermal energy, and power. The overall system is efficient at full and part-load, scaleable to a wide range of sizes, environmentally friendly, and potentially competitive with conventional technology in first cost. Promising applications for fuel cells include portable power, transportation, building cogeneration, and distributed power for utilities. For portable power a fuel cell coupled with a fuel container can offer a higher energy storage density and more convenience than conventional battery systems. In transportation applications, fuel cells offer higher efficiency and better part-load performance than conventional engines. In stationary power applications, low emissions permit fuel cells to be located in high power density areas where they can supplement the existing utility grid. Furthermore, fuel cell systems can be directly connected to a building to provide both power and heat with cogeneration efficiencies as high as 80%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fuel cells and their applications
KORDESCH, K. V., & Simader, G. R. (1996) · Cited by 716
(1993) · Springer eBooks · doi:10.1007/978-1-4899-2424-7 · Cited by 618
Fuel Cells: and Their Applications
Kordesch, K. V., & Simader, G. R. (1996) · Wiley eBooks · doi:10.1002/352760653x · Cited by 514
Intermediate temperature SOFC – a promise for the 21st century
Huijsmans, J. P. P., van Berkel, F. P. F., & Christie, G. M. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02789-4 · Cited by 345
Fuel cells for mobile applications, status, requirements and future application potential*1
Dönitz, W. (1998) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(97)00075-x · Cited by 49
Cited by
A review on fuel cell technologies and power electronic interface
Kirubakaran, A., Jain, S., & Nema, R. K. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.04.004 · Cited by 1,035
PEM fuel cell system control: A review
Daud, W. R. W., Rosli, R. E., Majlan, E. H., Hamid, S. A. A., Mohamed, R., & Husaini, T. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.06.027 · Cited by 708
Innovation ecosystems and the pace of substitution: Re‐examining technology S‐curves
Adner, R., & Kapoor, R. (2016) · Strategic Management Journal · doi:10.1002/smj.2363 · Cited by 620
High Step-Up Converter With Coupled-Inductor
Wai, R.-J., & Duan, R.-Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854023 · Cited by 611
Defects on carbons for electrocatalytic oxygen reduction
Yan, X., Jia, Y., & Yao, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00690j · Cited by 593
İnci, M., Büyük, M., Demir, M. H., & İlbey, G. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110648 · Cited by 548
Mesoporous materials for clean energy technologies
Linares, N., Silvestre-Albero, A. M., Serrano, E., Silvestre-Albero, J., & García-Martínez, J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60435g · Cited by 526
Review and prospect of integrated demand response in the multi-energy system
Wang, J., Zhong, H., Ma, Z., Xia, Q., & Kang, C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.150 · Cited by 521
A comprehensive review of direct carbon fuel cell technology
Giddey, S., Badwal, S. P. S., Kulkarni, A., & Munnings, C. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.01.003 · Cited by 499
Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies
Das, H. S., Tan, C. W., & Yatim, A. H. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.056 · Cited by 463
High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress
Wai, R.-J., Lin, C.-Y., Duan, R.-Y., & Chang, Y.-R. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888794 · Cited by 450
Sunarso, J., Hashim, S. S., Zhu, N., & Zhou, W. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.03.003 · Cited by 432
Power Electronics and Motor Drives Recent Progress and Perspective
Bose, B. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2002726 · Cited by 431
Nonisolated High Step-Up DC–DC Converters Adopting Switched-Capacitor Cell
Wu, G., Ruan, X., & Ye, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327000 · Cited by 408
Control Strategy of Fuel Cell and Supercapacitors Association for a Distributed Generation System
Thounthong, P., Rael, S., & Davat, B. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.896477 · Cited by 355
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
Lai, J.-S., & Nelson, D. J. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.890122 · Cited by 318
Self-citationMac Kinnon, M. A., Brouwer, J., & Samuelsen, S. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.10.002 · Cited by 310
A Perspective on Low-Temperature Water Electrolysis – Challenges in Alkaline and Acidic Technology
Schalenbach, M., Zeradjanin, A. R., Kasian, O., Cherevko, S., & Mayrhofer, K. J. J. (2018) · International Journal of Electrochemical Science · doi:10.20964/2018.02.26 · Cited by 305
An overview of process systems engineering approaches for process intensification: State of the art
Tian, Y., Demirel, S. E., Hasan, M. M. F., & Pistikopoulos, E. N. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.07.014 · Cited by 286
Xu, X., Xu, H., Zheng, J., Chen, L., & Wang, J. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113496 · Cited by 51
Water sorption and expansion of an ionomer membrane constrained by fuel cell electrodes
Goulet, M.-A., Arbour, S., Lauritzen, M., & Kjeang, E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.040 · Cited by 40
Lee, W. H., & Kim, H. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.04.002 · Cited by 20
Metadata
- Authors
- Ellis, M. W., Von Spakovsky, M. R., & Nelson, D. J.
- Venue
- Proceedings of the IEEE
- Published
- 2001
- Volume
- 89
- Issue
- 12
- Pages
- 1808-1818
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2147337530
- Cited by
- 449
- References
- 5
- FWCI
- 7.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.