The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
IEEE Standard for Synchrophasors for Power Systems
Abstract
IEEE Standard 1344, Synchrophasors for Power Systems, was completed in 1995. It sets parameters required to ensure that phasor measurement will be made and communicated in a consistent manner. It specifies requirements for the timing signal used for phasor synchronization and the time code needed for input to a measurement unit. GPS is the recommended time source and IRIG-B is the basic format used for time communication. The standard requires correlating phasors computed from unsynchronized and synchronized sampling to a common basis. Timetagging accurately and consistently is essential for wide area comparison of phase. The standard specifies information exchange and control message formats. These include data output, configuration, and command messages. It includes 7 annexes that discuss the concepts covered in the body of the standard.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Error Control Systems for Digital Communication and Storage
Wicker, S. B. (1995) · Medical Entomology and Zoology · Cited by 1,775
Network Time Protocol (Version 3) Specification, Implementation and Analysis
Mills, D. L. (1992) · doi:10.17487/rfc1305 · Cited by 851
Cited by
Synchronized Phasor Measurements and Their Applications
Phadke, A. G., & Thorp, J. S. (2008) · Power Electronics and Power Systems · doi:10.1007/978-0-387-76537-2 · Cited by 1,810
Self-citationWACS-Wide-Area Stability and Voltage Control System: R&D and Online Demonstration
Taylor, C. W., Erickson, D. C., Martin, K. E., Wilson, R. E., & Venkatasubramanian, V. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.846338 · Cited by 369
Self-citationSynchrophasor Measurement Technology in Power Systems: Panorama and State-of-the-Art
Aminifar, F., Fotuhi-Firuzabad, M., Safdarian, A., Davoudi, A., & Shahidehpour, M. (2014) · IEEE Access · doi:10.1109/access.2015.2389659 · Cited by 261
T-RECS: A software testbed for multi-agent real-time control of electric grids
Achara, J., Mohiuddin, M., Saab, W., Rudnik, R., & Le Boudec, J.-Y. (2017) · 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2017.8247706 · Cited by 7
Metadata
- Authors
- Martin, K. E., Benmouyal, G., Adamiak, M. G., Begovic, M., Burnett, R. O., Carr, K. R., Cobb, A., Kusters, J. A., Horowitz, S. H., Jensen, G. R., Michel, G. L., Murphy, R. J., Phadke, A. G., Sachdev, M. S., & Thorp, J. S.
- Venue
- IEEE Transactions on Power Delivery
- Published
- 1998
- Volume
- 13
- Issue
- 1
- Pages
- 73-77
- ISSN
- 0885-8977 (ISSN-L)
- OpenAlex
- W2133503228
- Cited by
- 379
- References
- 2
- FWCI
- 1.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.