The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Control and performance of a doubly-fed induction machine intended for a flywheel energy storage system
Abstract
A large-capacity low-speed flywheel energy storage system based on a doubly-fed induction machine basically consists of a wound-rotor induction machine, and a cycloconverter or a voltage-source pulse width modulation (PWM) rectifier-inverter which is used as an AC exciter. Adjusting the rotor speed makes the machine either release the kinetic energy to the power system or absorb it from the utility grid. Thus, the machine has the capability of achieving not only reactive-power control, but also active-power control based on the flywheel effect of the rotating parts. This paper proposes a new control strategy for a doubly-fed induction machine intended as a flywheel energy storage system, which is characterized by the combination of vector control and decoupling control. The control strategy enables the induction machine to perform active-power control independent of reactive-power control even in transient states. The validity of the theory developed in this paper, along with the effectiveness and viability of the control strategy, is confirmed by computer simulation. In addition, this paper discusses a transient behavior of a magnetizing current in the induction machine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Akagi, H., Kanazawa, Y., & Nabae, A. (1984) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1984.4504460 · Cited by 3,377
Self-citation10-MW GTO converter for battery peaking service
Walker, L. H. (1990) · IEEE Transactions on Industry Applications · doi:10.1109/28.52675 · Cited by 172
Large static converters for industry and utility applications
Akagi, H. (2001) · Proceedings of the IEEE · doi:10.1109/5.931498 · Cited by 98
Self-citation
Cited by
Energy Storage Systems for Transport and Grid Applications
Vazquez, S., Lukic, S. M., Galvan, E., Franquelo, L. G., & Carrasco, J. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2076414 · Cited by 1,347
Overview of Multi-MW Wind Turbines and Wind Parks
Liserre, M., Cardenas, R., Molinas, M., & Rodriguez, J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2103910 · Cited by 876
Overview of Control Systems for the Operation of DFIGs in Wind Energy Applications
Cardenas, R., Pena, R., Alepuz, S., & Asher, G. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2243372 · Cited by 670
Overview of control systems for the operation of DFIGs in wind energy applications
Pena, R., Cardenas, R., & Asher, G. (2013) · IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2013.6699116 · Cited by 529
Das, D. C., Roy, A. K., & Sinha, N. (2012) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2012.05.025 · Cited by 522
Metadata
- Authors
- Akagi, H., & Sato, H.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2002-01
- Volume
- 17
- Issue
- 1
- Pages
- 109-116
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2157845962
- Cited by
- 332
- References
- 3
- FWCI
- 10.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.