Monitoring the thermal condition of permanent-magnet synchronous motors
The DOI matches its Crossref record.
Abstract
This paper describes a novel approach to monitoring the condition of small permanent-magnet synchronous motors (PMSM) operating under thermal stress. The approach begins with the estimation of temperature-dependent motor parameters from measurements of line voltages and currents. The parameters are then used to derive estimates of motor temperatures. Next, the electrically estimated temperatures are combined with a surface measurement of motor temperature and a dynamic thermal model of the motor to yield an observer that is a Kalman filter. The temperatures estimated by the observer are used for failure prevention. Finally, by modifying the observer, it is tuned to use the geometric properties of its innovation for failure detection. The innovation, that is, the difference between the thermally and electrically estimated temperatures, is monitored and compared against appropriate thresholds to detect failures. Failure detection is demonstrated experimentally, and shown to be capable of distinguishing the conditions of normal operation, and operation with obstructed cooling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
A Survey of Methods for Detection of Stator-Related Faults in Induction Machines
Tallam, R. M., Lee, S. B., Stone, G. C., Kliman, G. B., Yoo, J., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900448 · Cited by 301
Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines
le Roux, W., Harley, R. G., & Habetler, T. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886620 · Cited by 274
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Thermal Parameter and State Estimation for Digital Twins of E-Powertrain Components
Rodriguez, B., Sanjurjo, E., Tranchero, M., Romano, C., & Gonzalez, F. (2021) · IEEE Access · doi:10.1109/access.2021.3094312 · Cited by 49
Metadata
- Authors
- Milanfar, P., & Lang, J. H.
- Venue
- IEEE Transactions on Aerospace and Electronic Systems
- Published
- 1996
- Volume
- 32
- Issue
- 4
- Pages
- 1421-1429
- ISSN
- 0018-9251 (ISSN-L)
- OpenAlex
- W2148546520
- Cited by
- 100
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.