The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Base parameters of manipulator dynamic models
Abstract
A base parameter set as a minimum set of inertial parameters whose values can determine a dynamic model uniquely is investigated for a general parallel and perpendicular manipulator with rotational joints only. The notion of a base parameter is useful for an efficient and accurate identification of the manipulator dynamic model. A set of inertial parameters described in linear combinations of link parameters directly and completely in closed form is given and proved to constitute a base parameter set. It can be derived from this that the minimum number of inertial parameters whose values can determine the dynamic model is 7N-4 beta /sub 1/ (7N-4 beta /sub 2/-2 if the first joint axis parallel to the gravity vector), where N is the number of links in the manipulator, and beta /sub 1/ is the number of links connected by joints whose axes are always parallel to the first joint axis. After defining the base parameter, it is also shown that any base parameter set can be obtained from one base parameter set by a nonsingular linear transformation. The method adopted has the potential advantage of determining the relations between base parameters and manipulator motions.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimation of Inertial Parameters of Manipulator Loads and Links
Atkeson, C. G., An, C. H., & Hollerbach, J. M. (1986) · The International Journal of Robotics Research · doi:10.1177/027836498600500306 · Cited by 590
Cited by
An overview of dynamic parameter identification of robots
Wu, J., Wang, J., & You, Z. (2010) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2010.03.013 · Cited by 415
Exciting Trajectories for the Identification of Base Inertial Parameters of Robots
Gautier, M., & Khalil, W. (1992) · The International Journal of Robotics Research · doi:10.1177/027836499201100408 · Cited by 308
Metadata
- Authors
- Mayeda, H., Yoshida, K., & Osuka, K.
- Venue
- IEEE Transactions on Robotics and Automation
- Published
- 1990-06
- Volume
- 6
- Issue
- 3
- Pages
- 312-321
- ISSN
- 1042-296X (ISSN-L)
- OpenAlex
- W4240806010
- Cited by
- 204
- References
- 1
- FWCI
- 11.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Base parameters of manipulator dynamic models. https://app.cochat.ai/papers/10.1109/70.56663
- The paper
- Mayeda, H., Yoshida, K., & Osuka, K. (1990). Base parameters of manipulator dynamic models. IEEE Transactions on Robotics and Automation. https://doi.org/10.1109/70.56663
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.