The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Impedance control for biped robot locomotion
Abstract
This paper proposes a control method for biped robot locomotion based on impedance control and impedance modulation. Both legs are controlled by the impedance control, where the desired impedance at the hip and the swing foot are specified. The impedance parameters are changed depending on the gait phase of the biped robot. To reduce the magnitude of impact and to guarantee a stable footing at foot landings on the ground, the damping coefficient of the impedance of the landing foot is increased drastically and the reference trajectory of the landing foot is reset at its initial contact with the ground. A series of computer simulations of a 12-degree-of-freedom (DOF) biped robot with a 6-DOF environment model which consists of nonlinear and linear compliant spring-and-dampers, shows that the proposed control method works well and is superior to position-oriented control methods such as the computed-torque control method in impact regulation during foot landings and adaptation to some ground irregularity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Cited by
The evolution of robotics research
Garcia, E., Jimenez, M. A., De Santos, P. G., & Armada, M. (2007) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2007.339608 · Cited by 371
Metadata
- Authors
- Park, J. H.
- Venue
- IEEE Transactions on Robotics and Automation
- Published
- 2001
- Volume
- 17
- Issue
- 6
- Pages
- 870-882
- ISSN
- 1042-296X (ISSN-L)
- OpenAlex
- W2141377539
- Cited by
- 199
- References
- 1
- FWCI
- 3.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.