The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Linear frequency-modulated signal detection using Radon-ambiguity transform
Abstract
A novel time-frequency technique for linear frequency modulated (LFM) signal detection is proposed. The design of the proposed detectors is based on the Radon transform of the modulus square or the envelope amplitude of the ambiguity function (AF) of the signal. A practical assumption is made that the chirp rate is the only parameter of interest. Since the AF of LFM signals will pass through the origin of the ambiguity plane, the line integral of the Radon transform is performed over all lines passing through the origin of the ambiguity plane. The proposed detectors yield maxima over chirp rates of the LFM signals. This reduces the two-dimensional (2-D) problem of the conventional Wigner-Ville distribution (WVD) based detection or the Radon-Wigner transform (RWT) based detector to a one-dimensional (1-D) problem and consequently reduces the computation load and keeps the feature of "built-in" filtering. Related issues such as the finite-length effect, the resolution, and the effect of noise are studied. The result is a tool for LFM detection, as well as the time-varying filtering and adaptive kernel design for multicomponent LFM signals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Table of Integrals, Series, and Products
(1980) · Elsevier eBooks · doi:10.1016/c2013-0-10754-4 · Cited by 18,782
Table of Integrals, Series, and Products.
Kolbig, K. S., Gradshteyn, I. S., Ryzhik, I. M., Jeffrey, A., & Scripta Technica, I. (1995) · Mathematics of Computation · doi:10.2307/2153347 · Cited by 9,550
Entropy-based algorithms for best basis selection
Coifman, R. R., & Wickerhauser, M. V. (1992) · IEEE Transactions on Information Theory · doi:10.1109/18.119732 · Cited by 3,188
An Introduction to Signal Detection and Estimation
Poor, H. V. (1988) · Springer Texts in Electrical Engineering · doi:10.1007/978-1-4757-3863-6 · Cited by 3,149
Image reconstruction from projections : the fundamentals of computerized tomography
Herman, G. T. (1980) · Academic Press eBooks · Cited by 1,993
The fractional Fourier transform and time-frequency representations
Almeida, L. B. (1994) · IEEE Transactions on Signal Processing · doi:10.1109/78.330368 · Cited by 1,924
Papoulis, A. (1977) · Cited by 1,572
Improved time-frequency representation of multicomponent signals using exponential kernels
Choi, H.-I., & Williams, W. J. (1989) · IEEE Transactions on Acoustics, Speech, and Signal Processing · doi:10.1109/assp.1989.28057 · Cited by 1,299
Wavelets: A Tutorial in Theory and Applications
Chui, C. K. (1992) · Cited by 919
Self-citationRadar Signals: An Introduction to Theory and Application
Cook, C. E., & Bernfeld, M. (1967) · Cited by 667
Cited by
Liu, X., Li, T., Fan, X., & Chen, Z. (2019) · Sensors · doi:10.3390/s19061477 · Cited by 8
“In the literature, there are many studies focused on the LFM signal intercepted by the conventional receiver, such as fractional Fourier transform (FrFT) [14], Radon-ambiguity transform [15], and combined Wigner–Hough transform [16,17].”
Background
Metadata
- Authors
- Wang, M., Chan, A. K., & Chui, C. K.
- Venue
- IEEE Transactions on Signal Processing
- Published
- 1998-03
- Volume
- 46
- Issue
- 3
- Pages
- 571-586
- ISSN
- 1053-587X (ISSN-L)
- OpenAlex
- W2166265025
- Cited by
- 257
- References
- 28
- FWCI
- 6.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Linear frequency-modulated signal detection using Radon-ambiguity transform. https://app.cochat.ai/papers/10.1109/78.661326
- The paper
- Wang, M., Chan, A. K., & Chui, C. K. (1998). Linear frequency-modulated signal detection using Radon-ambiguity transform. IEEE Transactions on Signal Processing. https://doi.org/10.1109/78.661326
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
