The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
914 MHz path loss prediction models for indoor wireless communications in multifloored buildings
Abstract
Qualitative models are presented that predict the effects of walls, office partitions, floors, and building layout on the path loss at 914 MHz. The site-specific models have been developed based on the number of floors, partitions, and concrete walls between the transmitter and receiver, and provide simple prediction rules which relate signal strength to the log of distance. The standard deviation between measured and predicted path loss is 5.8 dB for the entire data set, and can be as small as 4 dB for specific areas within a building. Average floor attenuation factors, which describe the additional path loss (in decibels) caused by floors between transmitter and receiver, are found for as many as four floors in a typical office building. Path loss contour plots for measured data are presented. In addition, contour plots for the path loss prediction error indicate that the prediction models presented are accurate to within 6 dB for a majority of locations in a building.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Model for Indoor Multipath Propagation
Saleh, A. A. M., & Valenzuela, R. (1987) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.1987.1146527 · Cited by 3,398
900 MHz path loss measurements and prediction techniques for in-building communication system design
Seidel, S. Y., & Rappaport, T. S. (2002) · IEEE Vehicular Technology Conference · doi:10.1109/vetec.1991.140565 · Cited by 35
Self-citation
Cited by
RADAR: an in-building RF-based user location and tracking system
Bahl, P., & Padmanabhan, V. N. (2002) · Proceedings IEEE INFOCOM 2000. Conference on Computer Communications. Nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies (Cat. No.00CH37064) · doi:10.1109/infcom.2000.832252 · Cited by 8,380
“This observation is consistent with [Sei921 where the attenuation between different floors was considered and shown to flatten out as the number of floors between the transmitter and the receiver increased.”
ResultThe indoor radio propagation channel
Hashemi, H. (1993) · Proceedings of the IEEE · doi:10.1109/5.231342 · Cited by 1,729
A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring
Lynch, J. P. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102406061499 · Cited by 1,533
Understanding packet delivery performance in dense wireless sensor networks
Zhao, J., & Govindan, R. (2003) · Proceedings of the 1st international conference on Embedded networked sensor systems · doi:10.1145/958491.958493 · Cited by 1,267
From RSSI to CSI: Indoor localization via channel response
Yang, Z., Zhou, Z., & Liu, Y. (2013) · ACM Computing Surveys · doi:10.1145/2543581.2543592 · Cited by 1,229
Metadata
- Authors
- Seidel, S. Y., & Rappaport, T. S.
- Venue
- IEEE Transactions on Antennas and Propagation
- Published
- 1992
- Volume
- 40
- Issue
- 2
- Pages
- 207-217
- ISSN
- 0018-926X (ISSN-L)
- OpenAlex
- W2149922723
- Cited by
- 925
- References
- 2
- FWCI
- 7.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.