The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Investigation of high-temperature degradation of platinum thin films with an in situ resistance measurement apparatus
Abstract
Many microfabricated systems require metallizations that can withstand high temperatures. In particular, a microfabricated chemical reactor system which we are investigating needs thin metal films for heating and temperature sensing that can withstand prolonged 1000/spl deg/C exposure. The current microreactor metallization, a 100-nm platinum film with a 10-nm titanium adhesion layer, degrades at temperatures greater than 700/spl deg/C. This degradation was examined with a custom-built high-temperature resistance measurement apparatus in addition to chemical analysis, scanning electron microscopy (SEM), atomic-force microscopy (AFM) and wafer curvature measurements. Thicker films and coating layers increased the lifetime of these films while exposure to oxygen decreased lifetime, consistent with the hypothesized degradation mechanism of agglomeration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mullins, W. W. (1957) · Journal of Applied Physics · doi:10.1063/1.1722742 · Cited by 2,629 · cited 1×
“In the first stage, the platinum grain boundaries form grooves in the manner first presented by Mullins [13].”
Background
Cited by
Recent advances in energy-saving chemiresistive gas sensors: A review
Majhi, S. M., Mirzaei, A., Kim, H. W., Kim, S. S., & Kim, T. W. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105369 · Cited by 653
High-Temperature Piezoelectric Sensing
Jiang, X., Kim, K., Zhang, S., Johnson, J., & Salazar, G. (2013) · Sensors · doi:10.3390/s140100144 · Cited by 435
Atomic-scale electron microscopy at ambient pressure
Creemer, J. F., Helveg, S., Hoveling, G. H., Ullmann, S., Molenbroek, A. M., Sarro, P. M., & Zandbergen, H. W. (2008) · Ultramicroscopy · doi:10.1016/j.ultramic.2008.04.014 · Cited by 338
Metadata
- Authors
- Firebaugh, S. L., Jensen, K. F., & Schmidt, M. A.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 1998-03
- Volume
- 7
- Issue
- 1
- Pages
- 128-135
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2151103381
- Cited by
- 193
- References
- 1
- FWCI
- 2.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of high-temperature degradation of platinum thin films with an in situ resistance measurement apparatus. https://app.cochat.ai/papers/10.1109/84.661395
- The paper
- Firebaugh, S. L., Jensen, K. F., & Schmidt, M. A. (1998). Investigation of high-temperature degradation of platinum thin films with an in situ resistance measurement apparatus. Journal of Microelectromechanical Systems. https://doi.org/10.1109/84.661395
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.