The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication
Abstract
We present three-dimensional (3-D) microstructures fabricated from photopolymerizable resin with a resolution of 0.62 /spl mu/m. The method used to fabricate such small structures has been developed using a femto-second-pulsed near-infrared (IR) laser. Structures such as microcoils and microtubes are presented which demonstrate the effectiveness of our method. In this method, a two-photon absorption process is successfully utilized to confine the solidification of photopolymerizable resin to the focused spot of the laser, which is possible due to the quadratic dependence of the two-photon absorption rate on light intensity. The experimental system, experimental conditions, and related issues for this novel method of photopolymerization are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Self-citationThree-dimensional optical data storage in refractive media by two-photon point excitation
Strickler, J. H., & Webb, W. W. (1991) · Optics Letters · doi:10.1364/ol.16.001780 · Cited by 627
Cited by
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Self-citationA review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Serbin, J., Egbert, A., Ostendorf, A., Chichkov, B. N., Houbertz, R., Domann, G., Schulz, J., Cronauer, C., Fröhlich, L., & Popall, M. (2003) · Optics Letters · doi:10.1364/ol.28.000301 · Cited by 592
Metadata
- Authors
- Maruo, S., & Kawata, S.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 1998
- Volume
- 7
- Issue
- 4
- Pages
- 411-415
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2113417865
- Cited by
- 217
- References
- 2
- FWCI
- 5.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.