The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Concepts and methods in fault-tolerant control
Abstract
Faults in automated processes will often cause undesired reactions and shut-down of a controlled plant, and the consequences could be damage to technical parts of the plant, to personnel or the environment. Fault-tolerant control combines diagnosis with control methods to handle faults in an intelligent way. The aim is to prevent that simple faults develop into serious failure and hence increase plant availability and reduce the risk of safety hazards. Fault-tolerant control merges several disciplines into a common framework to achieve these goals. The desired features are obtained through online fault diagnosis, automatic condition assessment and calculation of appropriate remedial actions to avoid certain consequences of a fault. The envelope of the possible remedial actions is very wide. Sometimes, simple re-tuning can suffice. In other cases, accommodation of the fault could be achieved by replacing a measurement from a faulty sensor by an estimate. In yet other situations, complex reconfiguration or online controller redesign is required. This paper gives an overview of recent tools to analyze and explore structure and other fundamental properties of an automated system such that any inherent redundancy in the controlled process can be fully utilized to maintain availability, even though faults may occur.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,183
Failure diagnosis using discrete-event models
Sampath, M., Sengupta, R., Lafortune, S., Sinnamohideen, K., & Teneketzis, D. C. (1996) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.486338 · Cited by 737
Design of reliable control systems
Veillette, R. J., Medanic, J., & Perkins, W. (1992) · IEEE Transactions on Automatic Control · doi:10.1109/9.119629 · Cited by 695
Fault-Tolerant Control: The 1997 Situation
Patton, R. J. (1997) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)42536-5 · Cited by 640
Fault-tolerant control systems — A holistic view
Blanke, M., Izadi-Zamanabadi, R., Bøgh, S. A., & Lunau, C. P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00051-8 · Cited by 291
Self-citationWhat is Fault-Tolerant Control?
Blanke, M., Frei, W. C., Kraus, F. J., Patton, J. R., & Staroswiecki, M. (2000) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)37338-x · Cited by 173
Self-citationA ship propulsion system as a benchmark for fault-tolerant control
Izadi‐Zamanabadi, R., & Blanke, M. (1999) · Control Engineering Practice · doi:10.1016/s0967-0661(98)00149-x · Cited by 145
Self-citationControl reconfigurability of linear time-invariant systems
Wu, N. E., Zhou, K., & Salomon, G. (2000) · Automatica · doi:10.1016/s0005-1098(00)00080-7 · Cited by 136
Self-citationRecoverability viewed as a system property
Frei, C. W., Kraus, F. J., & Blanke, M. (1999) · European Control Conference (ECC) · doi:10.23919/ecc.1999.7099646 · Cited by 58
Self-citationOptimal redundancy management in reconfigurable control systems based on normalized nonspecificity
Wu, N. E., & Klir, G. J. (2000) · International Journal of Systems Science · doi:10.1080/00207720050030833 · Cited by 14
Self-citation
Cited by
Bibliographical review on reconfigurable fault-tolerant control systems
Zhang, Y., & Jiang, J. (2008) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2008.03.008 · Cited by 2,652
Fault Accommodation for Nonlinear Dynamic Systems
Jiang, B., Staroswiecki, M., & Cocquempot, V. (2006) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2006.878732 · Cited by 781
Self-citationA review of Fault Tolerant Control Systems: Advancements and applications
Amin, A. A., & Hasan, K. M. (2019) · Measurement · doi:10.1016/j.measurement.2019.04.083 · Cited by 377
Fault-tolerant control in variable speed drives: a survey
Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070203 · Cited by 228
Metadata
- Authors
- Blanke, M., Staroswiecki, M., & Wu, N. E.
- Venue
- Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148)
- Publisher
- IEEE
- Published
- 2001
- Pages
- 2606-2620 vol.4
- ISSN
- 0743-1619 (ISSN-L)
- OpenAlex
- W2041245382
- Cited by
- 276
- References
- 10
- FWCI
- 30.37
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Concepts and methods in fault-tolerant control. https://app.cochat.ai/papers/10.1109/acc.2001.946264
- The paper
- Blanke, M., Staroswiecki, M., & Wu, N. E. (2001). Concepts and methods in fault-tolerant control. Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148). https://doi.org/10.1109/acc.2001.946264
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.