Time Series Data for Equipment Reliability Analysis With Deep Learning
Open accessThe DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
With the deep integration of cyber physical production systems in the era of Industry 4.0, smart workshop dramatically increases the amount of data collected by smart device. A key factor in achieving smart manufacturing is to use data analysis methods for evaluating the equipment reliability and for supporting the predictive maintenance of equipment. Based on these insights, this paper proposes a deep learning-based approach that uses time series data for equipment reliability analysis. First, a framework of the TensorFlow-enabled deep neural networks (DNN) model for equipment reliability analysis is presented. Secondly, using time series equipment data, an evaluation strategy of equipment reliability based on deep learning is proposed. Finally, the reliability of a cylinder, an important part of the small trolley in automobile assembly line, is evaluated in a case study. Compared with the traditional reliability analysis method such as PCA and HMM, the prediction results show a significant improvement in prediction accuracy. This work contributes to promoting artificial intelligence algorithms for realizing highly efficient manufacturing.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Dropout as a bayesian approximation: Representing model uncertainty in deep learning
Gal, Y., & Ghahramani, Z. (2015) · arXiv · doi:10.48550/arxiv.1506.02142 · Cited by 6,471
Deep Learning Classification of Land Cover and Crop Types Using Remote Sensing Data
Kussul, N., Lavreniuk, M., Skakun, S., & Shelestov, A. (2017) · IEEE Geoscience and Remote Sensing Letters · doi:10.1109/lgrs.2017.2681128 · Cited by 1,786
A survey of methods for time series change point detection
Aminikhanghahi, S., & Cook, D. J. (2017) · Knowledge and Information Systems · doi:10.1007/s10115-016-0987-z · Cited by 1,237
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191 · cited 1×
“[13] proposed an intelligent fault diagnosis method using unsupervised feature learning for mechanical big data.”
MethodSmart Factory of Industry 4.0: Key Technologies, Application Case, and Challenges
Chen, B., Wan, J., Shu, L., Li, P., Mukherjee, M., & Yin, B. (2018) · IEEE Access · doi:10.1109/access.2017.2783682 · Cited by 1,135
Self-citationDeep supervised learning for hyperspectral data classification through convolutional neural networks
Makantasis, K., Karantzalos, K., Doulamis, A., & Doulamis, N. (2015) · 2015 IEEE International Geoscience and Remote Sensing Symposium (IGARSS) · doi:10.1109/igarss.2015.7326945 · Cited by 1,011
A review on time series forecasting techniques for building energy consumption
Deb, C., Zhang, F., Yang, J., Lee, S. E., & Shah, K. W. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.085 · Cited by 1,006
Fault diagnosis for rotating machinery using multiple sensors and convolutional neural networks
Xia, M., Li, T., Xu, L., Liu, L., & de Silva, C. W. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2728371 · Cited by 723 · cited 1×
“In an intelligent manufacturing environment, industrial sensor networks acquire data at a high frequency [3], [4].”
BackgroundA Model-Based Method for Remaining Useful Life Prediction of Machinery
Lei, Y., Li, N., Gontarz, S., Lin, J., Radkowski, S., & Dybala, J. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2570568 · Cited by 617
Research works printed but not linked: 1
- stanford-clark, 2013, MQTT for sensor networks (MQTT-SN) protocol specification, Int Bus Mach (IBM) Corp Version, 1, 1
Cited by
Predictive maintenance in Industry 4.0: A systematic multi-sector mapping
Mallioris, P., Aivazidou, E., & Bechtsis, D. (2024) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2024.02.003 · Cited by 247
Fernandes, M., Corchado, J. M., & Marreiros, G. (2022) · Applied Intelligence · doi:10.1007/s10489-022-03344-3 · Cited by 238
A Review of Time-Series Forecasting Algorithms for Industrial Manufacturing Systems
Fatima, S. S. W., & Rahimi, A. (2024) · Machines · doi:10.3390/machines12060380 · Cited by 196
Machine-Learning-Driven Digital Twin for Lifecycle Management of Complex Equipment
Ren, Z., Wan, J., & Deng, P. (2022) · IEEE Transactions on Emerging Topics in Computing · doi:10.1109/tetc.2022.3143346 · Cited by 158
Jamwal, A., Agrawal, R., & Sharma, M. (2022) · International Journal of Information Management Data Insights · doi:10.1016/j.jjimei.2022.100107 · Cited by 146
Design and management of assembly systems 4.0: systematic literature review and research agenda
Dolgui, A. B., Sgarbossa, F., & Simonetto, M. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.1990433 · Cited by 121
Time-series pattern recognition in Smart Manufacturing Systems: A literature review and ontology
Farahani, M. A., McCormick, M. R., Gianinny, R., Hudacheck, F., Harik, R., Liu, Z., & Wuest, T. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.05.025 · Cited by 117
A Survey and Perspective on Industrial Cyber-Physical Systems (ICPS): From ICPS to AI-Augmented ICPS
Chae, J., Lee, S., Jang, J., Hong, S., & Park, K. (2023) · IEEE Transactions on Industrial Cyber-Physical Systems · doi:10.1109/ticps.2023.3323600 · Cited by 86
Continual Deep Learning for Time Series Modeling
Ao, S.-I., & Fayek, H. M. (2023) · Sensors · doi:10.3390/s23167167 · Cited by 77
Sverko, M., Grbac, T. G., & Mikuc, M. (2022) · IEEE Access · doi:10.1109/access.2022.3211288 · Cited by 71
“…from field devices, it affects not only real-time process control, but also time series analysis applied in various algorithms used for equipment reliability analysis i.e. predictive maintenance [43], [44], process optimization, condition monitoring [45], quality control [46], [47] and similar.”
MethodKozłowski, E., Borucka, A., Oleszczuk, P., & Jałowiec, T. (2023) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein/172857 · Cited by 57
Maintenance strategy selection: a comprehensive review of current paradigms and solution approaches
Patil, A., Soni, G., Prakash, A., & Karwasra, K. (2021) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-04-2021-0105 · Cited by 54
A Systematic Literature Review of Industry 4.0 Technologies within Medical Device Manufacturing
Lepasepp, T. K., & Hurst, W. (2021) · Future Internet · doi:10.3390/fi13100264 · Cited by 39
Chinta, V. S., Reddi, S. K., & Yarramsetty, N. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102105 · Cited by 35
A systematic review of time series algorithms and analytics in predictive maintenance
Syed, M. A. B., Hasan, M. R., Chowdhury, N. I., Rahman, M. H., & Ahmed, I. (2025) · Decision Analytics Journal · doi:10.1016/j.dajour.2025.100573 · Cited by 33
Data Science Methods and Tools for Industry 4.0: A Systematic Literature Review and Taxonomy
Arruda, H., Bavaresco, R. S., Kunst, R., Bugs, E. F., Pesenti, G. C., & Barbosa, J. L. V. (2023) · Sensors · doi:10.3390/s23115010 · Cited by 33
Medical Device Failure Predictions Through AI-Driven Analysis of Multimodal Maintenance Records
Rahman, N. H. A., Hasikin, K. B., Razak, N. A. A., Al-Ani, A. K. I., Anni, D. J. S., & Mohandas, P. (2023) · IEEE Access · doi:10.1109/access.2023.3309671 · Cited by 33
Dechgummarn, Y., Fuangfoo, P., & Kampeerawat, W. (2022) · IEEE Access · doi:10.1109/access.2022.3215956 · Cited by 29
Qi, X., Yang, B. Y., Wang, S., Zhang, Z., Zhang, Y., & Du, K. (2026) · Knowledge-Based Systems · doi:10.1016/j.knosys.2026.115266 · Cited by 25
Zhang, Z., Yu, J., Yang, B. Y., Du, K., Wang, S., & Qi, X. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2025.103705 · Cited by 23
A Fusion Algorithm for Online Reliability Evaluation of Microgrid Inverter IGBT
Wang, C., He, Y., Wang, C., Wu, X., & Li, L. (2020) · Electronics · doi:10.3390/electronics9081294 · Cited by 19
Lin, S., Wang, L., Jun, W., Liang, J., & Liu, Z. (2021) · Applied Sciences · doi:10.3390/app11198967 · Cited by 16
Çalışkan, A., O’Brien, C., Panduru, K., Walsh, J., & Riordan, D. (2023) · Sustainability · doi:10.3390/su15129272 · Cited by 14
Yang, Z., Pak, U., Kwon, C., & Zhang, Y. (2022) · Quality and Reliability Engineering International · doi:10.1002/qre.3230 · Cited by 14
Xiao, X., Zhu, H., Liang, J., Tong, J., & Wang, H. (2025) · arXiv (Cornell University) · doi:10.48550/arxiv.2507.01017 · Cited by 14
Cho, Y. S., & Kim, S. B. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2024.3363189 · Cited by 13
KESTİRİMCİ BAKIMDA MAKİNE ÖĞRENMESİ: LİTERATÜR ARAŞTIRMASI
DÜNDAR, D. R., Sarıçiçek, İ., Çinar, E. M., & Yazıcı, A. T. (2021) · Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi :/Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi dergisi · doi:10.31796/ogummf.873963 · Cited by 13
Sudiatmika, I. P. G. A., Putra, I. M. A. W., & Artana, W. W. (2024) · Brilliance Research of Artificial Intelligence · doi:10.47709/brilliance.v4i1.3865 · Cited by 12
Farbiz, F., Aggarwal, S., Maszczyk, T. K., Habibullah, M. S., & Hamadicharef, B. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02482-4 · Cited by 12
Machine learning-based dispatching for a wet clean station in semiconductor manufacturing
Han, J., Jeong, S.-H., Hwang, G., & Lee, J.-Y. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.09.018 · Cited by 11
Deep Neural Network Models for Improving Truck Productivity Prediction in Open-pit Mines
Uğurlu, Ö. F., Fan, C., Jiang, B., & Liu, W. V. (2024) · Mining Metallurgy & Exploration · doi:10.1007/s42461-024-00924-4 · Cited by 9
Strengthening Digital Twin Applications based on Machine Learning for Complex Equipment
Ren, Z., & Wan, J. (2021) · Design, Automation, and Test in Europe · doi:10.23919/date51398.2021.9474133 · Cited by 8
Wen, Y.-C., & Chen, W.-H. (2022) · Applied Sciences · doi:10.3390/app12094718 · Cited by 8
Minimal Filtering Algorithms for Convolutional Neural Networks
Cariow, A., & Cariowa, G. (2021) · Studies in computational intelligence · doi:10.1007/978-3-030-74556-1_5 · Cited by 7
Machine learning applications in Cyber-Physical Production Systems: a survey
Zhang, Z., Liu, C., Zhang, J., Peng, T., Hu, X., & Xu, Y. (2022) · International Conference on Automation and Computing (ICAC) · doi:10.1109/icac55051.2022.9911092 · Cited by 7
Morozov, A. S., Fabarisov, T., Vock, S., Siedel, G., Bolbot, V., & Voß, S. (2026) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · doi:10.1115/1.4070764 · Cited by 6
Improved Bayes-Based Reliability Prediction of Small-Sample Hall Current Sensors
Chen, T., Liu, Z., Ju, L., Lu, Y., & Wei, S. (2024) · Machines · doi:10.3390/machines12090618 · Cited by 5
Devi, H., Kumar, P. R., Govindarajan, V., Kumar, S., Lohano, R., Hitesh, H., & Shiwlani, A. (2026) · IEEE Access · doi:10.1109/access.2026.3651446 · Cited by 5
Arez, D., Navas, H. V. G., & Gaspar, P. (2026) · Applied Sciences · doi:10.3390/app16104882 · Cited by 6
A hybrid deep learning model approach for performance index prediction of mechanical equipment
Hou, D., & Mingjia, C. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac769d · Cited by 5
Optimizing Big Data Retrieval and Job Scheduling Using Deep Learning Approaches
Chang, B. R., Tsai, H. F., & Lin, Y.-C. (2022) · Computer Modeling in Engineering & Sciences · doi:10.32604/cmes.2022.020128 · Cited by 5
Schneider, N., Lermer, M., & Reich, C. (2024) · Procedia Computer Science · doi:10.1016/j.procs.2024.09.526 · Cited by 6
Digital Twin-Based MPC for Industrial MIMO Automation: Intelligent Algorithms
Suleimenov, B., Shiryayeva, O. I., & Gorbunov, D. V. (2026) · Automation · doi:10.3390/automation7010008 · Cited by 4
ANALYSIS OF THE POVERTY LEVEL AND HUMAN DEVELOPMENT INDEX IN CENTRAL JAVA FOR THE 2016-2021 PERIOD
Sulistiani, L. S., & Najmudin, N. (2023) · Economics and Finance · doi:10.51586/2754-6209.2023.11.3.28.41 · Cited by 4
Nie, W., Qian, J., Li, C., Zhang, S., & Li, W. (2025) · Journal of Chromatography A · doi:10.1016/j.chroma.2025.465874 · Cited by 3
Improved Reliability Prediction in Engineering Systems Based on Artificial Neural Network
Sobhana, M., Preethi, G. S. S., Sri, G. H., & Sujitha, K. B. (2022) · International Mobile and Embedded Technology Conference (MECON) · doi:10.1109/mecon53876.2022.9752305 · Cited by 3
Edge computing for critical environments: Vision and existing solutions
Ahmad, I., Gentili, A., Singh, R., Ahonen, J., Suomalainen, J., Horsmanheimo, S., Keränen, H., & Harjula, E. (2023) · ITU Journal on Future and Evolving Technologies · doi:10.52953/vibq8773 · Cited by 3
Hu, C. H., Xianming, S., Cui, X., & Wang, Y. (2025) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein/216106 · Cited by 2
Chen, S., Wang, H., & Zhang, F. (2026) · Applied Soft Computing · doi:10.1016/j.asoc.2026.114635 · Cited by 2
Data Science Analysis Method Design via Big Data Technology and Attention Neural Network
Ren, Y. (2022) · Mobile Information Systems · doi:10.1155/2022/9915481 · Cited by 2
Computer Simulation Method for Data Trust Analysis Based on Average Deviation Algorithm
Zhang, Z. (2023) · IEEE Access · doi:10.1109/access.2023.3248066 · Cited by 2
Application of machine learning algorithms to enhance blockchain network security
Solomka, I. R., Liubinskyi, B. B., & Torshyn, V. V. (2024) · Mathematical Modeling and Computing · doi:10.23939/mmc2024.03.893 · Cited by 2
Knowledge-based maintenance framework for smart manufacturing
Kohl, L. (2025) · reposiTUm (TU Wien) · doi:10.34726/hss.2025.117579 · Cited by 2
Aplicación de un modelo estocástico para el Análisis RAM de Máquinas Rotatorias en la Industria 4.0
Zambrano, T., & Balaguer, E. P. (2023) · Ciencia Latina Revista Científica Multidisciplinar · doi:10.37811/cl_rcm.v7i2.5756 · Cited by 1
Liu, H., Hu, T., Chen, T., Li, M., & Du, K. (2024) · Open Physics · doi:10.1515/phys-2023-0188 · Cited by 1
Papliński, J. P., Cariow, A., Strzelec, P., & Makowska, M. (2024) · Signals · doi:10.3390/signals5030021 · Cited by 1
Digital twin-driven human-machine collaborative maintenance services for continuous slab caster
Chen, B., Zhang, Y., Wan, J., Wang, L., Martínez-García, M., Xia, X., Zhu, J., & Jackson, L. M. (2026) · International Journal of Production Research · doi:10.1080/00207543.2025.2609943 · Cited by 1
Self-citationSoftware Reliability Assessment and Prediction Method Based on Vector Autoregressive Model
严, 可. (2022) · Advances in Applied Mathematics · doi:10.12677/aam.2022.1110756 · Cited by 1
Shi, Y., & Pang, J. (2023) · International Conference on System Reliability and Safety Engineering (SRSE) · doi:10.1109/srse59585.2023.10336057 · Cited by 1
MSS principles and application
Farsi, M. A., & Nadjafi, M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99204-6.00011-x
Aplicación de un modelo estocástico para el Análisis RAM de Máquinas Rotatorias en la Industria 4.0
Zambrano, T., & Balaguer, E. P. (2023) · Ciencia Latina Revista Científica Multidisciplinar · doi:10.37811/cl_rcm.v7i2.5709
Antoshchuk, S. G., Shcherbakova, G. Y., & Koshutina, D. V. (2025) · Scientific Works of Vinnytsia National Technical University · doi:10.31649/2307-5376-2025-3-27-36
Chinta, V. S., Reddi, S. K., & Yarramsetty, N. (2026) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054261422317
Xiao, X., Zhu, H., Liang, J., Zhao, J., Tong, J., & Wang, H. (2026) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2026.106505
Asy’ari, M. K., Kurniawan, A., Mawarani, L. J., Musyafa, A., Abadi, I., Aufa, A. N., & Nu’ila, A. U. (2026) · Power Engineering and Engineering Thermophysics · doi:10.56578/peet050305
Aplicación de un modelo estocástico para el Análisis RAM de Máquinas Rotatorias en la Industria 4.0
Zambrano, T., & Balaguer, E. P. (2023) · Dialnet (Universidad de la Rioja)
Metadata
- Authors
- Chen, B., Liu, Y., Zhang, C., & Wang, Z.
- Affiliations
- South China University of Technology (CN)
- Hubei University of Arts and Science (CN)
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 105484-105493
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3033437210
- Cited by
- 60
- References
- 23
- Citations by year
- 2026: 9 · 2025: 4 · 2024: 11 · 2023: 15 · 2022: 13 · 2021: 7 · 2020: 1
- FWCI
- 8.04
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Key Program of National Natural Science Foundation of China (U1801264)
- Guangdong Province Key Areas Research and Development Program (2019B090919002)
- S&T Planning Project of Guangdong Province (2017B090913002)
- New Model Application Project of Intelligent Manufacturing in the Ministry of Industry and Information
- Topics
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- time series, deep neural network, predictive maintenance, smart manufacturing, Industry 4.0, automotive assembly line, TensorFlow
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.