Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 23 of the 24 references it cites were found in a registry or an index; 5 of the 8 sources its claims cite were checked for support.

Design and Implementation of Portable Smart Wireless Pedestrian Crossing Control System

Open access

Abstract

The system incorporates the concept of smart sensing to detect the presence of pedestrians and in turn, automatically controls the crosswalk traffic lights using Arduino microcontrollers, PIR sensors, and Bluetooth communication.

Overview

CoChat Summary

TL;DR

The paper designs, fabricates, and validates a portable smart wireless pedestrian crossing control system that uses PIR motion sensors to detect pedestrians and automatically switch LED traffic lights, with Bluetooth linking the two roadside units. Testing in a real environment on a 6 m road width at a university campus showed the system worked effectively and met its design criteria.

Key findings

  • The system "worked effectively and fulfilled the design criteria," with communication between the traffic lights on both roadsides successfully functioning and the PIR sensors accurately detecting the existence of pedestrians.
  • The developed system is described as cost-effective, energy-efficient, easy to install, and maintenance-free.
  • The design replaces manual push-button activation: the authors cite that only 60% of pedestrians would locate and push the activation feature before crossing, leaving 40% at greater risk, motivating a hands-free sensor-based approach.
  • LED lights (12 V DC, 10 mA) were used instead of AC lights to improve efficiency and reduce energy consumption; six lights are used for vehicle traffic lights and four for pedestrian lights (125 mm car, 75 mm pedestrian).

Methods

  • Design and fabrication of two identical roadside units, each comprising an Arduino Uno (ATmega328) microcontroller, a PIR sensor, a Bluetooth module, a relay board, and vehicle/pedestrian traffic lights, plus a manual power switch.
  • Components: two PIR HR-S501 motion sensors (sensitivity up to 20 feet / 6 m, 110° × 70° detection range), two HC-05 Bluetooth modules (Bluetooth V2.0+EDR, 3 Mbps, 2.4 GHz) for bidirectional wireless communication, 5 V DC opto-isolator 6-channel relay boards, and LED traffic lights powered by Lithium Polymer rechargeable batteries (12 V, 2200 mAh, 0.1 mA).
  • Software and algorithm developed in the Arduino IDE; the system was fabricated as a portable LED-based testbed and tested/validated in a real environment with a 6 m road width on the university campus.

Limitations

  • Not stated in the paper (the provided text is truncated before the results and conclusion sections, so any limitations the authors may have stated there are not available).
  • Evident from the text: the system relies on Bluetooth for the inter-unit link, which the paper itself characterizes as suited to "short range wireless communications," and the validation is limited to a single 6 m road width on a university campus rather than a broader range of real-world crossing sites.

Model-written summary of a shortened version of the paper’s full text (it is longer than we read). Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1109/access.2020.3000014

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 5 Not valid · 1 Not checked · 10 Own results and interpretations

6 more claims

Create a free account to see all 16 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 5

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 24 references

Research works printed but not linked: 4

  1. montufar, 2018, Pedestrian Crossing Control Guide
  2. administration, 1988, Manual on Uniform Traffic Control Devices (MUTCD) for Streets and Highways
  3. ariffin, 2010, Pedestrian casualties in road accidents-Malaysia perspective, Proc MIROS Road Saf Conf, 280
  4. 2020, Road Traffic Injuries

Cited by

See all 30

Metadata

Authors
Saad, W. K., Hashim, Y., & Jabbar, W. A.
Affiliations
  • Al-Furat Al-Awsat Technical University (IQ)
  • Tishk International University (IQ)
  • Universiti Malaysia Pahang Al-Sultan Abdullah (MY)
Venue
IEEE Access
Published
2020
Volume
8
Pages
106109-106120
ISSN
2169-3536 (ISSN-L)
OpenAlex
W3033756302
Cited by
29
References
24
Citations by year
2026: 1 · 2025: 8 · 2024: 2 · 2023: 3 · 2022: 9 · 2021: 4 · 2020: 2
FWCI
1.55
Type
journal article
Language
en
Open access
Locations
  • IEEE Access (publishedVersion, cc-by)
  • UMP Institutional Repository (Universiti Malaysia Pahang) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Universiti Malaysia Pahang via UMP-IBM Centre of Excellence (RDU190304)
  • Engineering Technical College-Najaf, Al-Furat Al-Awsat Technical University
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Arduino and IoT Applications
  • Physical Sciences › Engineering › Control and Systems Engineering › Traffic control and management
  • Physical Sciences › Engineering › Automotive Engineering › IoT and GPS-based Vehicle Safety Systems
Keywords
Bluetooth communication, passive infrared sensor, pedestrian detection, Arduino

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Design and Implementation of Portable Smart Wireless Pedestrian Crossing Control System. https://app.cochat.ai/papers/10.1109/access.2020.3000014
The paper
Saad, W. K., Hashim, Y., & Jabbar, W. A. (2020). Design and Implementation of Portable Smart Wireless Pedestrian Crossing Control System. IEEE Access. https://doi.org/10.1109/access.2020.3000014

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.