Big Data Life Cycle in Shop-Floor–Trends and Challenges
Open accessThe DOI matches its Crossref record; 82 of the 83 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
Big data is defined as a large set of data that could be structured or unstructured. In manufacturing shop-floor, big data incorporates data collected at every stage of the production process. This includes data from machines, connecting devices, and even manufacturing operators. The large size of the data available on the manufacturing shop-floor presents a need for the establishment of tools and techniques along with associated best practices to leverage the advantage of data-driven performance improvement and optimization. There also exists a need for a better understanding of the approaches and techniques at various stages of the data life cycle. In the work carried out, the data life-cycle in shop-floor is studied with a focus on each of the components - Data sources, collection, transmission, storage, processing, and visualization. A narrative literature review driven by two research questions is provided to study trends and challenges in the field. The selection of papers is supported by an analysis of n-grams. Those are used to comprehensively characterize the main technological and methodological aspects and as starting point to discuss potential future research directions. A detailed review of the current trends in different data life cycle stages is provided. In the end, the discussion of the existing challenges is also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“SCPs are equipped with sensors, embedded systems, and communication capabilities that enable them to gather various types of data, such as sensor readings, usage patterns, and environmental information.”
From AdaptUI: A Framework for the development of Adaptive User Interfaces in Smart Product-Service Systems (2024) · cites this paper as Pulikottil et al. 2023
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Beyond the hype: Big data concepts, methods, and analytics
Gandomi, A., & Haider, M. (2015) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2014.10.007 · Cited by 4,226 · cited 1×
“tured, semi-structured, and unstructured [25].”
Data-driven smart manufacturing
Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.006 · Cited by 1,806 · cited 6×
“Big data may be processed efficiently by means of data cleaning, data reduction, data analysis, and data mining techniques, owing to advances in artificial intelligence, cloud computing and IoT [1].”
BackgroundMethodInfluentialSmart manufacturing: Past research, present findings, and future directions
Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., Son, J. Y., Kim, B. H., & Noh, S. D. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0015-5 · Cited by 1,362 · cited 1×
“Three key SM technologies include: (i) CPS (physical assets integrated with computational capabilities), (ii) IoT (highly connected devices with embedded sensors), and big data [3].”
BackgroundRecent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090 · cited 1×
“Big data, and data in general, requires to be structured into specific content formats and context to be useful for users [16].”
BackgroundBig Data technologies: A survey
Oussous, A., Benjelloun, F.-Z., Ait Lahcen, A., & Belfkih, S. (2018) · Journal of King Saud University - Computer and Information Sciences · doi:10.1016/j.jksuci.2017.06.001 · Cited by 980 · cited 1×
“The big data age has arisen with the massive use of mobile and smart devices, the great availability of IoT devices, and cloud computing, when traditional methods were not sufficient for adequate information processing [4].”
BackgroundMachine learning and data mining in manufacturing
Dogan, A., & Birant, D. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2020.114060 · Cited by 677 · cited 1×
“On a high level, manufacturing data may be categorized into management, equipment, user, product, operational, and process data [6] and [1].”
BackgroundBig data analytics for intelligent manufacturing systems: A review
Wang, J., Xu, C., Zhang, J., & Zhong, R. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.03.005 · Cited by 603 · cited 2×
“Thereafter, during production, data analytics monitor the production process and lead to informed decision making regarding the manufacturing process, improving product quality and reducing production costs [10].”
BackgroundBig Data for Remote Sensing: Challenges and Opportunities
Chi, M., Plaza, A., Benediktsson, J. A., Sun, Z., Shen, J., & Zhu, Y. (2016) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2598228 · Cited by 599
Smart manufacturing: Characteristics, technologies and enabling factors
Mittal, S., Khan, M. A., Romero, D., & Wuest, T. (2019) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405417736547 · Cited by 560 · cited 1×
“Data may be visualized in dashboards, including statements, charts, graphs and augmented reality [27], and data may be queried in real time or on demand, based on the users needs, enabling decision making based on historical or real-time data.”
BackgroundBig Data: Survey, Technologies, Opportunities, and Challenges
Khan, N., Yaqoob, I., Hashem, I. A. T., Inayat, Z., Mahmoud Ali, W. K., Alam, M., Shiraz, M., & Gani, A. (2014) · The Scientific World Journal · doi:10.1155/2014/712826 · Cited by 547
Smart Manufacturing and Intelligent Manufacturing: A Comparative Review
Wang, B., Tao, F., Fang, X., Liu, C., Liu, Y., & Freiheit, T. (2021) · Engineering · doi:10.1016/j.eng.2020.07.017 · Cited by 542
Ren, S., Zhang, Y., Liu, Y., Sakao, T., Huisingh, D., & Almeida, C. M. V. B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.025 · Cited by 525
Zhang, Y., Ren, S., Liu, Y., & Si, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.123 · Cited by 512 · cited 8×
“Real-time data may be transmitted using WiFi, Zigbee, and 4G through Internet and using VPNs. Non-real time data may be transmitted through technologies or application like Apache Sqoop and Data/X [40].”
BackgroundMethodInfluentialAddressing big data issues in Scientific Data Infrastructure
Demchenko, Y., Grosso, P., de Laat, C., & Membrey, P. (2013) · 2013 International Conference on Collaboration Technologies and Systems (CTS) · doi:10.1109/cts.2013.6567203 · Cited by 491 · cited 2×
“…big data in streams or batches, in real time or non-real time), (iii) variety (dealing with complex big data formats, schemas, semantic models and information), (iv) value (analysing data to deliver added-value to some events), (v) and veracity (validate data consistency and trust-worthiness) [9].”
BackgroundYan, J., Meng, Y., Lu, L., & Li, L. (2017) · IEEE Access · doi:10.1109/access.2017.2765544 · Cited by 479 · cited 3×
“For example, 3D laser scanners have been used to evaluate tool flank wear [45].”
BackgroundMethodA big data approach for logistics trajectory discovery from RFID-enabled production data
Zhong, R. Y., Huang, G. Q., Lan, S., Dai, Q. Y., Chen, X., & Zhang, T. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.02.014 · Cited by 464 · cited 1×
“Smart sensors have been used to track equipment and people e.g. RFID tags [38], [39], [40], [41].”
MethodA Survey on Recent Advances in Named Entity Recognition from Deep Learning models
Yadav, V., & Bethard, S. J. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1910.11470 · Cited by 464 · cited 1×
“In case of customer requirement, natural language processing techniques, such as named entity recognition [49], relation extraction [50], and attribute extraction [51], have been used.”
MethodThe internet of things for smart manufacturing: A review
Yang, H., Kumara, S., Bukkapatnam, S. T. S., & Tsung, F. (2019) · IISE Transactions · doi:10.1080/24725854.2018.1555383 · Cited by 449 · cited 1×
“The advent of IoT and new industrial protocols have supported the acquisition of the information from manufacturing cells, products, transport systems, and people [8].”
BackgroundCross-Sentence N-ary Relation Extraction with Graph LSTMs
Peng, N., Poon, H., Quirk, C., Toutanova, K., & Yih, W.-T. (2017) · Transactions of the Association for Computational Linguistics · doi:10.1162/tacl_a_00049 · Cited by 443 · cited 1×
“entity recognition [49], relation extraction [50], and attribute”
BackgroundA Manufacturing Big Data Solution for Active Preventive Maintenance
Wan, J., Tang, S., Li, D., Wang, S., Liu, C., Abbas, H., & Vasilakos, A. V. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2670505 · Cited by 441 · cited 7×
“Device status and logs have been periodically collected and stored [47].”
BackgroundMethodInfluentialIndustrial Big Data Analytics and Cyber-physical Systems for Future Maintenance & Service Innovation
Lee, J., Ardakani, H. D., Yang, S., & Bagheri, B. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.026 · Cited by 382 · cited 7×
“Wear information has been collected after a predefined amount of time to accurately analysis the wear (e.g. tool wear is measured every 20min in [44]).”
BackgroundMethodInfluentialInteractions with big data analytics
Fisher, D., DeLine, R., Czerwinski, M., & Drucker, S. (2012) · Interactions · doi:10.1145/2168931.2168943 · Cited by 361
Manufacturing big data ecosystem: A systematic literature review
Cui, Y., Kara, S., & Chan, K. C. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101861 · Cited by 334 · cited 3×
“Cui et al. [7] stated that almost half of big data collection applications were distributed in monitoring (25”
BackgroundInfluentialA review of industrial big data for decision making in intelligent manufacturing
Li, C., Chen, Y., & Shang, Y. (2022) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2021.06.001 · Cited by 325
Lu, Y., & Xu, X. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.11.006 · Cited by 294 · cited 2×
“Different data types include structured (formatted as tables), semi-structured (such as XML, JSON, and HTML) and unstructured data (such as documents, images, audio, video, text, and emails) [58].”
BackgroundReal-time information capturing and integration framework of the internet of manufacturing things
Zhang, Y., Zhang, G., Wang, J., Sun, S., Si, S., & Yang, T. (2015) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2014.900874 · Cited by 274 · cited 1×
“The collection is performed mainly by IoT technologies, by means of smart sensor nodes equipped with sensing devices, such as accelerometers and temperature sensors, and the data is then transmitted using standardized communication protocols [23].”
MethodA framework for Big Data driven product lifecycle management
Zhang, Y., Ren, S., Liu, Y., Sakao, T., & Huisingh, D. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.172 · Cited by 243 · cited 1×
“Smart sensors have been used to track equipment and people e.g. RFID tags [38], [39], [40], [41].”
MethodReducing the energy consumption of industrial robots in manufacturing systems
Paryanto, Brossog, M., Bornschlegl, M., & Franke, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6737-z · Cited by 239 · cited 1×
“Industrial robots, for example, can provide power consumption for each joint of the robot directly from a robot controller [32].”
BackgroundA global manufacturing big data ecosystem for fault detection in predictive maintenance
Yu, W., Dillon, T., Mostafa, F., Rahayu, W., & Liu, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915846 · Cited by 225
Tool wear classification using time series imaging and deep learning
Martínez-Arellano, G., Terrazas, G., & Ratchev, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04090-6 · Cited by 225 · cited 2×
“Data-based maintenance sensors that have been used in literature include vibration [44], [45], acoustic emission [44], [45], temperature [40], [44], current [44], [45], velocity [40], pressure [40], and forces [46], implemented in various parts of the machine.”
BackgroundMethodBelhadi, A., Zkik, K., Cherrafi, A., Yusof, S. M., & El fezazi, S. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106099 · Cited by 201
Big Data Analytics in Sustainable Supply Chain Management: A Focus on Manufacturing Supply Chains
Mageto, J. (2021) · Sustainability · doi:10.3390/su13137101 · Cited by 183
An automatic method for constructing machining process knowledge base from knowledge graph
Guo, L., Yan, F., Li, T., Tao, Y., & Lu, Y. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102222 · Cited by 172 · cited 1×
“An ontology model and schema layer of the knowledge graph has been defined and the knowledge has been represented with fuzzy comprehensive evaluation [69].”
MethodBig data analytics based fault prediction for shop floor scheduling
Ji, W., & Wang, L. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.03.008 · Cited by 170
Optimization of the energy consumption of industrial robots for automatic code generation
Gadaleta, M., Pellicciari, M., & Berselli, G. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.12.020 · Cited by 165 · cited 1×
“Hence, industrial standards such as Modbus and Profinet have been used for mission-critical applications [59], [61].”
Identifying helpful online reviews: A product designer’s perspective
Liu, Y., Jin, J., Ji, P., Harding, J. A., & Fung, R. Y. K. (2013) · Computer-Aided Design · doi:10.1016/j.cad.2012.07.008 · Cited by 164 · cited 1×
“Data analytics may be applied during the design phase, translating customer needs into product features and quality requirements [28].”
MethodZhou, B., Bao, J., Li, J., Lu, Y., Liu, T., & Zhang, Q. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102160 · Cited by 164
Smart and cognitive solutions for Operator 4.0: Laboratory H-CPPS case studies
Zolotová, I., Papcun, P., Kajáti, E., Miškuf, M., & Mocnej, J. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.10.032 · Cited by 162 · cited 2×
“For instance, wearable trackers measure human performance under stressful or difficult conditions, analyzing the data and sending warnings when needed [36].”
BackgroundSurvey on Machine Learning and Deep Learning Algorithms used in Internet of Things (IoT) Healthcare
Durga, S., Nag, R., & Daniel, E. (2019) · International Conference on Computing Methodologies and Communication (ICCMC) · doi:10.1109/iccmc.2019.8819806 · Cited by 158 · cited 1×
“If data come from datasets, deep learning techniques and sampling techniques have been used to collect data [52].”
MethodGraph Databases Comparison: AllegroGraph, ArangoDB, InfiniteGraph, Neo4J, and OrientDB
Fernandes, D., & Bernardino, J. (2018) · International Conference on Data Science, Technology and Applications (DATA) · doi:10.5220/0006910203730380 · Cited by 157 · cited 2×
“The Neo4j system is a widely used graph database [63].”
MethodDesign Principles for Effective Knowledge Discovery from Big Data
Begoli, E., & Horey, J. (2012) · 2012 Joint Working IEEE/IFIP Conference on Software Architecture and European Conference on Software Architecture · doi:10.1109/wicsa-ecsa.212.32 · Cited by 149 · cited 3×
“As such, the first design principle of knowledge discovery in big data is that data processing should be supported by a variety of data processing methods and analysis environments [26].”
BackgroundInfluentialSahoo, S. (2022) · International Journal of Production Research · doi:10.1080/00207543.2021.1919333 · Cited by 147
ViDX: Visual Diagnostics of Assembly Line Performance in Smart Factories
Xu, P., Mei, H., Ren, L., & Chen, W. (2016) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2016.2598664 · Cited by 144
Meike, D., Pellicciari, M., & Berselli, G. (2014) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2013.2285813 · Cited by 134
A survey of visualization for smart manufacturing
Zhou, F., Lin, X., Liu, C., Zhao, Y., Xu, P., Ren, L., Xue, T., & Ren, L. (2018) · Journal of Visualization · doi:10.1007/s12650-018-0530-2 · Cited by 134 · cited 3×
“Nevertheless, predictive applications do not necessarily require a real-time data collection and focuses on extracting patterns and trends based on historical process data for optimization and management innovation [57].”
BackgroundInfluentialWang, Y., Wang, S., Yang, B., Zhu, L., & Liu, F. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119299 · Cited by 129
Knowledge graph fusion for smart systems: A Survey
Nguyen, H. L., Vu, D. T., & Jung, J. J. (2020) · Information Fusion · doi:10.1016/j.inffus.2020.03.014 · Cited by 114 · cited 1×
“Finally, the data layer has been instantiated to construct the final knowledge base [72].”
MethodA data-driven method for optimizing the energy consumption of industrial robots
Zhang, M., & Yan, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124862 · Cited by 107 · cited 1×
“Once data has been processed, it has been fed into application-dependent algorithms such as ARIMA, Seasonal ARIMA, Bayesian Optimization, clustering, neural networks [66], genetic algorithms [67] and parameter identification methods [68].”
MethodAdaptation Data Selection using Neural Language Models: Experiments in Machine Translation
Duh, K., Neubig, G., Sudoh, K., & Tsukada, H. (2013) · Cited by 107
A systematic survey of Internet of Things frameworks for smart city applications
Peralta Abadía, J. J., Walther, C., Osman, A., & Smarsly, K. (2022) · Sustainable Cities and Society · doi:10.1016/j.scs.2022.103949 · Cited by 105 · cited 1×
“Defining standardized means of transmission, communication and application protocols define how the elements communicate data among each other, for example data transmission rate and communication range, ensuring real-time, secure, and scalable data transmission [24].”
BackgroundSelf-citationVillalonga, A., Beruvides, G., Castaño, F., & Haber, R. E. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2971057 · Cited by 104
Machchhar, R. J., Melén, C. N. K. T., Bertoni, A., & Bertoni, M. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103606 · Cited by 101
Energy-Efficient Fault-Tolerant Data Storage and Processing in Mobile Cloud
Chen, C.-A., Won, M., Stoleru, R., & Xie, G. G. (2015) · IEEE Transactions on Cloud Computing · doi:10.1109/tcc.2014.2326169 · Cited by 98
Development of Advanced Manufacturing Cloud of Things (AMCoT)—A Smart Manufacturing Platform
Lin, Y.-C., Hung, M.-H., Huang, H.-C., Chen, C.-C., Yang, H.-C., Hsieh, Y.-S., & Cheng, F.-T. (2017) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2017.2706859 · Cited by 97 · cited 2×
“Common data formats to store machine information are XML and JSON files [38].”
BackgroundFurht, B., & Villanustre, F. (2016) · Springer eBooks · doi:10.1007/978-3-319-44550-2_1 · Cited by 95
Borgman, C. L., Wallis, J. C., Mayernik, M. S., & Pepe, A. (2007) · ACM/IEEE Joint Conference on Digital Libraries · doi:10.1145/1255175.1255228 · Cited by 93
The role of structured and unstructured data managing mechanisms in the Internet of things
Azad, P., Navimipour, N. J., Rahmani, A. M., & Sharifi, A. (2019) · Cluster Computing · doi:10.1007/s10586-019-02986-2 · Cited by 91 · cited 2×
“Data collection in shop-floor depends on the nature of the data, i.e. structured and unstructured [55].”
BackgroundZhang, M., Zuo, Y., & Tao, F. (2018) · 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC) · doi:10.1109/icnsc.2018.8361272 · Cited by 83 · cited 1×
“Resampling methods such as averaging, forward filling, or backward filling have been used in literature [65].”
MethodAutomated data collection for simulation?
Robertson, N., & Perera, T. (2002) · Simulation Practice and Theory · doi:10.1016/s0928-4869(01)00055-6 · Cited by 82 · cited 1×
“Automated data collection is performed by automated systems like sensors, measuring, and control devices that correspond to changes in physical processes [54].”
MethodNakata, K., Orihara, R., Mizuoka, Y., & Takagi, K. (2017) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2017.2753251 · Cited by 82 · cited 6×
“In [47], the manufacturing data processed is sent to backstage supporters and the diagnosis or prognosis reports are visualized on large screens through a web application (Single View integrated failure map pattern monitoring and cause [48]) or sent to mobile devices of the maintenance personnel.”
BackgroundMethodInfluentialLiu, A., Liu, H., Yao, B., Xu, W., & Yang, M. Y. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018773852 · Cited by 82 · cited 1×
“Once data has been processed, it has been fed into application-dependent algorithms such as ARIMA, Seasonal ARIMA, Bayesian Optimization, clustering, neural networks [66], genetic algorithms [67] and parameter identification methods [68].”
MethodKahveci, S., Alkan, B., Ahmad, M. H., Ahmad, B., & Harrison, R. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.03.010 · Cited by 74
Creating design guidelines for building city dashboards from a user's perspectives
Young, G. W., & Kitchin, R. (2020) · International Journal of Human-Computer Studies · doi:10.1016/j.ijhcs.2020.102429 · Cited by 66 · cited 1×
“In general, data visualization can include [84]: Different types of charts and graphs, tables, time trends, etc. Interactive widgets (i.e. knobs, dimers, keypads, etc.) used to interact with CPS, IoT devices and applications, based on current data analysis.”
MethodCloud-based smart manufacturing for personalized candy packing application
Wang, S., Wan, J., Imran, M. A., Li, D., & Zhang, C. (2016) · The Journal of Supercomputing · doi:10.1007/s11227-016-1879-4 · Cited by 60 · cited 4×
“Thereafter, collected data are transmitted manually in batch to processing computers via Ethernet connections.”
BackgroundMethodInfluentialBig data/analytics platform for Industry 4.0 implementation in advanced manufacturing context
Bonnard, R., Arantes, M. D. S., Lorbieski, R., Vieira, K., & Nunes, M. C. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07834-5 · Cited by 57
Zambal, S., Eitzinger, C., Clarke, M., Klintworth, J., & Mechin, P.-Y. (2018) · 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2018.8472014 · Cited by 56
A model of the data (life) cycles with application to quality
Levitin, A., & Redman, T. C. (1993) · Information and Software Technology · doi:10.1016/0950-5849(93)90069-f · Cited by 54
Zhang, C., Wang, Z., Ding, K., Chan, F. T. S., & Ji, W. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1748904 · Cited by 50
A knowledge representation for unit manufacturing processes
Zhang, Y., Luo, X., Zhang, H., & Sutherland, J. W. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5864-x · Cited by 49 · cited 1×
“Knowledge has been directly described as production rules [70] and as knowledge graph [71].”
BackgroundGadaleta, M., Berselli, G., Pellicciari, M., & Grassia, F. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102046 · Cited by 49
Big Data Technologies and Applications
Furht, B., & Villanustre, F. (2016) · Springer eBooks · doi:10.1007/978-3-319-44550-2 · Cited by 47 · cited 1×
“In general, big data refers to the storage and analysis of data sets that are characterized by large volume and variety of sources, high velocity of generation and processing, and value generation from its analysis [5].”
BackgroundImproving Data Consistency in Production Control
Reuter, C., & Brambring, F. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.12.116 · Cited by 42 · cited 1×
“However, they are highly inconsistent and unreliable [53].”
BackgroundA transfer-learning based energy consumption modeling method for industrial robots
Yan, J., & Zhang, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129299 · Cited by 39 · cited 1×
“Once data has been processed, it has been fed into application-dependent algorithms such as ARIMA, Seasonal ARIMA, Bayesian Optimization, clustering, neural networks [66], genetic algorithms [67] and parameter identification methods [68].”
MethodDing, K., Zhang, Y., Chan, F. T. S., Zhang, C., Lv, J., Liu, Q., Leng, J., & Fu, H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126599 · Cited by 38
An OPC UA-Compliant Interface of Data Analytics Models for Interoperable Manufacturing Intelligence
Shin, S. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3024628 · Cited by 37 · cited 1×
“Cloud-based systems have also been recommended, as modularity among components of the pipeline is promoted [60].”
BackgroundManaging Organizational Data Resources: Quality Dimensions
Yoon, V., Aiken, P. H., & Guimãrães, T. (2000) · Information Resources Management Journal · doi:10.4018/irmj.2000070101 · Cited by 24
Cloud Based Decision Making for Multi-agent Production Systems
Rehman, H. U., Pulikottil, T. B., Estrada-Jimenez, L. A., Mo, F., Chaplin, J. C., Barata, J., & Ratchev, S. M. (2021) · Lecture notes in computer science · doi:10.1007/978-3-030-86230-5_53 · Cited by 20 · cited 3×
“IoT communication has been used to perform data transmission using publish/subscribe messaging, e.g. MQTT protocol [43], for event-driven process automation purposes.”
MethodInfluentialSelf-citationKohlert, M., & Konig, A. S. (2014) · Neural Computing and Applications · doi:10.1007/s00521-014-1654-5 · Cited by 19 · cited 1×
“Some examples for process automation include neural networks, support vector machines, and k-nearest neighbours [42].”
BackgroundEffective Big Data Visualization
Mani, M., & Fei, S. (2017) · International Database Engineering and Applications Symposium (IDEAS) · doi:10.1145/3105831.3105857 · Cited by 14 · cited 1×
“Data visualization is an integral part of data analysis which concentrates on the use of tables and graphs for presenting quantitative and qualitative information, and as a way that users can communicate with the data [83].”
BackgroundSaez, M., Lengieza, S., Maturana, F., Barton, K. L., & Tilbury, D. M. (2018) · IEEE International Conference on Electro Information Technology · doi:10.1109/eit.2018.8500153 · Cited by 14 · cited 2×
“Similarly Similarly, [81] developed dashboards using Grafana and Amazon QuickSight for its compatibility with Spark to display the results of small-batch processing for the detection of anomalies on CNC Machines.”
BackgroundMethodReview on Energy Consumption Optimization Methods of Typical Discrete Manufacturing Equipment
Yao, M., Shao, Z., & Zhao, Y. (2021) · Lecture notes in computer science · doi:10.1007/978-3-030-89134-3_5 · Cited by 9 · cited 1×
“Devices used to monitor energy in shop-floor include smart meters, current and voltage clamps, and machine-integrated devices that provide out-of-the-box instantaneous power consumption [31].”
BackgroundResearch on Product Attribute Extraction and Classification Method for Online Review
Sun, L. J. (2017) · International Conference on Industrial Informatics - Computing Technology, Intelligent Technology, Industrial Information Integration (ICIICII) · doi:10.1109/iciicii.2017.37 · Cited by 8
Data Driven Prognostics of Milling Tool Wear :A Machine Learning Approach
Vijay, S. T., Pillai, V. M., & Kuraichen, B. (2021) · International Conference on Computational Performance Evaluation (ComPE) · doi:10.1109/compe53109.2021.9751990 · Cited by 8 · cited 1×
“Reference [85] used matplotlib to visualize a heat map o to find the correlation between the variables involved in milling tool wear.”
Method
Research works printed but not linked: 4
- Demiris, 2018, Behavioral Intervention Research in Hospice and Palliative Care: Building an Evidence Base
- Milivojević, Using COLLADA and X3D for WebGL based 3D data visualization
- Bonnard, A big data/analytics platform for industry 4.0 implementation in SMEs, 1
- 10.1016/j.rcim.2020.102046 · DOI
Cited by
15 years of Big Data: a systematic literature review
Tosi, D., Kokaj, R., & Roccetti, M. (2024) · Journal Of Big Data · doi:10.1186/s40537-024-00914-9 · Cited by 110
Agent-based manufacturing — review and expert evaluation
Pulikottil, T. B., Estrada-Jimenez, L. A., Rehman, H. U., Mo, F., Nikghadam-Hojjati, S., & Barata, J. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11517-8 · Cited by 68
“the load-unbalance help of big data feedback [66], smart assessment and control techniques are suggested.”
BackgroundSelf-citationCarrera-Rivera, A., Larrinaga, F., Lasa, G., Martinez-Arellano, G., & Unamuno, G. (2024) · User Modeling and User-Adapted Interaction · doi:10.1007/s11257-024-09414-0 · Cited by 30
Self-citationIntegrated Low-Cost Water Quality Monitoring System Based on LoRa Network
Georgantas, I., Mitropoulos, S., Katsoulis, S., Chronis, I., & Christakis, I. (2025) · Electronics · doi:10.3390/electronics14050857 · Cited by 24
Rehman, H. U., Mo, F., Chaplin, J. C., Zarzycki, L., Jones, M., & Ratchev, S. M. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.12.004 · Cited by 22
Self-citation
Metadata
- Authors
- Pulikottil, T., Estrada-Jimenez, L. A., Abadía, J. J. P., Carrera-Rivera, A., Torayev, A., Rehman, H. U., Mo, F., Nikghadam-Hojjati, S., & Barata, J.
- Affiliations
- Uninova (PT)
- Mondragon Unibertsitatea (ES)
- University of Nottingham (GB)
- ORCID
- Venue
- IEEE Access
- Published
- 2023
- Volume
- 11
- Pages
- 30008-30026
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W4323338602
- Cited by
- 14
- References
- 83
- Citations by year
- 2026: 2 · 2025: 3 · 2024: 7 · 2023: 2
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- Repository@Nottingham (University of Nottingham) (publishedVersion, other-oa)
- Lirias (submittedVersion, cc-by)
- eRepository Mondragon University (Mondragon University) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) (submittedVersion, other-oa)
- Funders
- Digital Manufacturing and Design Training Network (814078)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Social Sciences › Decision Sciences › Management Science and Operations Research › Impact of AI and Big Data on Business and Society
- Physical Sciences › Computer Science › Information Systems › Technology and Data Analysis
- Keywords
- big data, data lifecycle, data collection, data storage, data processing, data visualization, machine data, data transmission, n-gram analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.