Harmonic Distortion Indices for Experimental Characterization of Variable Frequency Drives
Open accessThe DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
This work proposes a set of distortion rates and procedures for calculating them to reflect the energy quality delivered by the converter to the motor more reliably than standard indices, especially under high harmonic/interharmonic content and variable fundamental frequencies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Signal Processing of Power Quality Disturbances
Bollen, M. H. J., & Gu, I. Y. (2006) · Wiley eBooks · doi:10.1002/0471931314 · Cited by 1,100 · cited 5×
“The non-stationarity of the signals of the frequency inverters requires a balance between time and frequency resolution (uncertainty principle) [32], [38].”
BackgroundMethodInfluentialMotor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
Harmonics estimation in emerging power system: Key issues and challenges
Jain, S. K., & Singh, S. N. (2011) · Electric Power Systems Research · doi:10.1016/j.epsr.2011.05.004 · Cited by 227 · cited 1×
“DFT is a flexible, robust technique with a low computational burden and a good compromise between accuracy and simplification [37] compared to other parametric, nonparametric and hybrid harmonic analysis methods [32].”
MethodThomson, W. T., & Culbert, I. (2016) · Wiley eBooks · doi:10.1002/9781119175476 · Cited by 187 · cited 1×
“One of the most widespread techniques and special relevance due to its easy practical applicability is the analysis of the motor power supply current (known as Motor Current Signature Analysis or MCSA) to diagnose its condition [5], [6], [7].”
BackgroundLangella, R., Testa, A., Meyer, J., Möller, F., Stiegler, R., & Djokic, S. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2554378 · Cited by 168 · cited 4×
“In [18], the authors use the THDS subgroup distortion rate of the standard [14] to measure the distortion generated by grid-connected renewable energy converters.”
BackgroundMethodResultInfluentialYakhni, M. F., Cauët, S., Sakout, A., Assoum, H., Etien, E., Rambault, L., & El-Gohary, M. A. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109737 · Cited by 129 · cited 2×
“One of the most widespread techniques and special relevance due to its easy practical applicability is the analysis of the motor power supply current (known as Motor Current Signature Analysis or MCSA) to diagnose its condition [5], [6], [7].”
BackgroundEarly Detection of Faults in Induction Motors—A Review
Garcia-Calva, T. A., Moríñigo-Sotelo, D., Fernandez-Cavero, V., & Romero-Troncoso, R. D. J. (2022) · Energies · doi:10.3390/en15217855 · Cited by 124 · cited 1×
“This is a very active field of research in which new proposals to improve the reliability of the diagnosis are continuously being published [3], [4].”
BackgroundSelf-citationSrivastava, A., Manas, M., & Dubey, R. K. (2023) · Journal of Engineering and Applied Science · doi:10.1186/s44147-023-00193-w · Cited by 106 · cited 1×
“…a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27], [28], [29].”
BackgroundTime‐Varying Waveform Distortions in Power Systems
A, C., R, L., & Prudenzi, A. (2009) · Wiley eBooks · doi:10.1002/9780470746752 · Cited by 90 · cited 2×
“…this time aggregation must be adapted to the thermal time coefficients of the attached devices: the 3 s aggregation interval is recommended for industrial environments characterised by short thermal time constants; other intervals are more suitable for systems with longer constants [32], [38].”
BackgroundAlhafadhi, L., & Teh, J. (2019) · International Journal of Energy Research · doi:10.1002/er.5075 · Cited by 81 · cited 1×
“…that the frequency converter delivers to the motor, and this information can be used to optimise the control of the power converters to improve the harmonic distortion produced by them [9], [10], [11], and thus facilitate the diagnosis and prevention of possible failures in the connected equipment.”
BackgroundMartínek, R., Rzidky, J., Jaroš, R., Bilík, P., & Ládrová, M. (2019) · Energies · doi:10.3390/en12081545 · Cited by 76
Kazemtarghi, A., Chandwani, A., Ishraq, N., & Mallik, A. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3183478 · Cited by 71
Comparison of measurement methods for the frequency range of 2 kHz to 150 kHz
Klatt, M., Meyer, J., & Schegner, P. (2014) · International Conference on Harmonics and Quality of Power · doi:10.1109/ichqp.2014.6842791 · Cited by 53 · cited 1×
“A comparison between these techniques ([13] and [14]) is presented in [43] and [44], showing that the IEC 61000-4-7 method has a higher signal-to-noise ratio and is more robust and accurate than the IEC 61000-4-30 method.”
MethodPrognostics and health management for induction machines: a comprehensive review
Huang, C., Bu, S., Lee, H. H., Chan, K. W., & Yung, W. K. C. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02103-6 · Cited by 53
Xu, X., Collin, A. J., Djokic, S., et al. (2016) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2016.2574566 · Cited by 51 · cited 2×
“In [15], [16], and [17], harmonics generated in the power grid by electric car chargers, photovoltaic inverters and further electronic devices are measured using factors of waveform distortion ( Fundamental Factor , FF , and Total Distortion Content , TDC ), and two new factors of waveform…”
BackgroundMethodExperimental evaluation and classification of LED lamps for typical residential applications
Xu, X., Collin, A. J., Djokic, S., et al. (2017) · IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe) · doi:10.1109/isgteurope.2017.8260292 · Cited by 42 · cited 3×
“The TH&IHDS YHF rate is again employed in [24] and [36], expanding the frequency range to 150 kHz.”
BackgroundMethodResultDuque-Pérez, Ó., García-Escudero, L. Á., Moríñigo-Sotelo, D., et al. (2014) · Electric Power Systems Research · doi:10.1016/j.epsr.2014.11.021 · Cited by 39 · cited 1×
“However, it has been found that the diagnosis is strongly influenced by the power supply mode of the motor, depending significantly on whether it is powered directly from the mains or by an inverter, but also on the specific converter used and its mode of operation [8].”
BackgroundSelf-citationEffects of Passive Components on the Input Current Interharmonics of Adjustable-Speed Drives
Soltani, H., Blaabjerg, F., Zare, F., et al. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2015.2505306 · Cited by 28 · cited 1×
“…a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27], [28], [29].”
BackgroundComparison of Measurement Methods for the Frequency Range 2 – 150 kHz (Supraharmonics)
Grevener, A., Meyer, J., & Sarah, R. (2018) · IEEE International Workshop on Applied Measurements for Power Systems (AMPS) · doi:10.1109/amps.2018.8494879 · Cited by 25 · cited 1×
“A comparison between these techniques ([13] and [14]) is presented in [43] and [44], showing that the IEC 61000-4-7 method has a higher signal-to-noise ratio and is more robust and accurate than the IEC 61000-4-30 method.”
MethodAlfieri, L., Bracale, A., & Larsson, A. (2017) · Energies · doi:10.3390/en10101633 · Cited by 22 · cited 1×
“For example, the ‘‘ Short Time Disturbance Energy index for both the Low—and High-Frequency ’’ indices are defined in [34] and allow quantifying a large frequency spectrum (from 2 to 150 kHz).”
BackgroundFernandez-Cavero, V., García-Escudero, L. Á., Pons-Llinares, J., et al. (2021) · Applied Sciences · doi:10.3390/app11093769 · Cited by 19
Self-citationArranz-Gimon, A., Zorita-Lamadrid, Á., Moríñigo-Sotelo, D., et al. (2022) · Electric Power Systems Research · doi:10.1016/j.epsr.2022.107833 · Cited by 19 · cited 1×
“Then, the aggregation time must be adapted to analyse the output signals of frequency converters, with harmonic content different from that of the power grid, since this time will also depend on the characteristics of the test, class of frequency converter and supported load [42].”
BackgroundSelf-citationA Modified Forward PFC Converter for LED Lighting Applications
Tsai, W., Chen, Y.-J., & Chen, Y.-M. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3217455 · Cited by 16 · cited 1×
“…a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27], [28], [29].”
BackgroundGudiño-Ochoa, A., Jalomo-Cuevas, J., Molinar-Solís, J. E., et al. (2023) · Energies · doi:10.3390/en16145538 · Cited by 16 · cited 1×
“The harmonic and interharmonic content of the stator current waveform will cause several effects on the stator that can affect its operation, for example, by increasing noise, its efficiency by increasing losses, and the life of the motor [1], [2].”
Backgroundde Oliveira, W. R., Filho, A. D. L. F., & Cormane, J. (2018) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2018.07.018 · Cited by 13 · cited 1×
“However, this window duration must be adapted to the signal type analysed for other signals [39].”
BackgroundA Flexible Supraharmonic Group Method Based on Switching Frequency Identification
Wang, Y., Xu, Y., Tao, S., et al. (2020) · IEEE Access · doi:10.1109/access.2020.2976138 · Cited by 13 · cited 1×
“…to find distortion indices containing frequency groupings in particular high-frequency zones with high interharmonic density, where the location of supraharmonics is associated with the commutation frequency and its multiples, as occurs with inverter outputs using PWM modulations [45], [46], [47].”
Mishra, A., & Chatterjee, K. (2021) · Alexandria Engineering Journal · doi:10.1016/j.aej.2021.08.079 · Cited by 12
Mohanty, R., Chatterjee, D., Mohanty, S., et al. (2024) · IEEE Access · doi:10.1109/access.2023.3349185 · Cited by 12 · cited 1×
“…of power converters producing a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable…”
BackgroundInvestigation of Input Harmonic Distortions of Variable Frequency Drives
Liang, X., Luy, Y., & Koval, D. O. (2007) · IEEE/IAS Industrial & Commercial Power Systems Technical Conference (I&CPS) · doi:10.1109/icps.2007.4292113 · Cited by 10 · cited 1×
“…a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27], [28], [29].”
BackgroundOperating Cycle Performance, Lost Periodicity, and Waveform Distortion of Switch-Mode Power Supplies
Xu, X., Collin, A. J., Djokic, S., et al. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2813761 · Cited by 10 · cited 3×
“In [35], the TIHDS rate defined in [18] is improved by adding the interharmonic subgroups 0 and 1, thus allowing the evaluation of the first interharmonics between 10 and 90 Hz, which may contain helpful information about the status of the motors connected to the drives.”
MethodResultSlangen, T., Cuk, V., Cobben, J. F. G., et al. (2023) · IEEE Power & Energy Society General Meeting (PESGM) · doi:10.1109/pesgm52003.2023.10252962 · Cited by 10
Selma, B., Selma, B., Bounadja, E., et al. (2024) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3958 · Cited by 9 · cited 1×
“…producing a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27],…”
BackgroundAn implementation of Short Time Fourier Transform for Harmonic Signal Detection
Basir, M. S. S. M., Ismail, R. C., Yusof, K. H., et al. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1755/1/012013 · Cited by 7 · cited 2×
“More recently, in [33], the real-time harmonic distortion of the analysed signal is evaluated in the time-frequency domain by applying the Short-Time Fourier Transform ( STFT ).”
MethodHarmonic Distortion in Low Voltage Residential Grids Caused by LED Lamps
Hernandez-Coba, J., Romero, A. A., Müller, S., et al. (2022) · International Conference on Harmonics and Quality of Power · doi:10.1109/ichqp53011.2022.9808589 · Cited by 7 · cited 1×
“…a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27], [28], [29].”
BackgroundArranz-Gimon, A., Zorita-Lamadrid, Á., Moríñigo-Sotelo, D., et al. (2019) · Applied Sciences · doi:10.3390/app9214549 · Cited by 6 · cited 1×
“The reason is that the spectral leakage modifies the phases of the tested interharmonics and the magnitudes of the vectors obtained by summing the total of the components in every spectral bin [41].”
BackgroundSelf-citationSimplified THD measurement and analysis for electronic power inverters
Sajjad, K., Kalsoom, G., & Mughal, A. H. (2015) · International Bhurban Conference on Applied Sciences and Technology (IBCAST) · doi:10.1109/ibcast.2015.7058502 · Cited by 5 · cited 1×
“It evaluates the amplitude of the fundamental frequency versus other low-frequency harmonic-only values of the measured signal [31].”
BackgroundPerformance comparison of three main SMPS types under sinusoidal and distorted supply voltage
Xu, X., Djokic, S., Langella, R., et al. (2017) · doi:10.1109/ptc.2017.7981211 · Cited by 5 · cited 2×
“The TH&IHDS YHF rate is again employed in [24] and [36], expanding the frequency range to 150 kHz.”
BackgroundMethodXu, X., Collin, A. J., Djokic, S., et al. (2016) · IEEE International Workshop on Applied Measurements for Power Systems (AMPS) · doi:10.1109/amps.2016.7602856 · Cited by 4
Harmonic modelling and characterisation of modern power electronic devices in low voltage networks
Xu, X. L. (2018) · ERA · Cited by 4
A variable bandwidth method for supraharmonic band aggregation
An, Z., Wang, T., Wang, Y., et al. (2019) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2019.8834137 · Cited by 2 · cited 1×
“…to find distortion indices containing frequency groupings in particular high-frequency zones with high interharmonic density, where the location of supraharmonics is associated with the commutation frequency and its multiples, as occurs with inverter outputs using PWM modulations [45], [46], [47].”
Varghese, L. J., Raj, R. G., Sankar, R. S. R., et al. (2023) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126623502870 · Cited by 2 · cited 1×
“…that the frequency converter delivers to the motor, and this information can be used to optimise the control of the power converters to improve the harmonic distortion produced by them [9], [10], [11], and thus facilitate the diagnosis and prevention of possible failures in the connected equipment.”
BackgroundA comprehensive study of grid impedance and its reliability effects on variable frequency drive
Pandurangan, R., Palanisamy, K., & Paramasivam, S. (2023) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v14.i2.pp673-687 · Cited by 1 · cited 1×
“…a high harmonic content at low and high frequencies, such as photovoltaic inverters [15], [16], [17], [18], [19], wind generators [20], [21], electronic car battery chargers [22], [23], energy-efficient lighting equipment [24], [25], [26], or even Adjustable Speed-Drives (ASD) [27], [28], [29].”
Background
Research works printed but not linked: 3
- 2015, Testing and Measurement Techniques-Power Quality Measurement Methods
- 2010, General Guide on Harmonics and Interharmonics Measurements, for Power Supply Systems and Equipment Connected Thereto
- 1995, Application Guide to the European Standard EN 50160 on ‘Voltage Characteristics of Electricity Supplied by Public Distribution Systems
Cited by
Simulation and Experimental Evaluation of a 5-Level Cascaded H-Bridge Inverter
Abdulwahab, I., Mahmud, I., Sulaiman, S. H., et al. (2025) · Vokasi UNESA Bulletin of Engineering, Technology and Applied Science · doi:10.26740/vubeta.v2i2.37172 · Cited by 2
Betti, C., Tinarelli, R., Peretto, L., et al. (2025) · Sensors · doi:10.3390/s25216716
Alharthi, A. K. Z., Althobiti, A. A., Marzband, M., et al. (2025) · International Conference on Environment Friendly Energies and Applications (EFEA) · doi:10.1109/efea67685.2025.11385947
“Most prior studies emphasize harmonic suppression, leaving a gap in understanding the baseline performance of SPWM-controlled IM drives without mitigation [16], [17].”
Metadata
- Authors
- Arranz-Gimon, A., Morinigo-Sotelo, D., Zorita-Lamadrid, A., & Duque-Perez, O.
- Affiliations
- Universidad de Valladolid (ES)
- Research Group ADIRE, Institute of Advanced Production Technologies, Universidad de Valladolid, Valladolid, Spain
- Venue
- IEEE Access
- Published
- 2024
- Volume
- 12
- Pages
- 146343-146358
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W4403123240
- Cited by
- 5
- References
- 44
- Citations by year
- 2026: 2 · 2025: 3
- FWCI
- 0.49
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- IEEE Access (publishedVersion, cc-by-nc-nd)
- Hispana (publishedVersion, cc-by-nc-nd)
- UVaDOC UVaDOC University of Valladolid Documentary Repository (University of Valladolid) (submittedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Universidad de Valladolid
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Power Quality and Harmonics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- variable frequency drive, power quality, distortion rate, frequency converter, induction motor, interharmonics, variable frequency supply
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.