The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Zero-voltage switching in high frequency power converters using pulse width modulation
Abstract
A zero-voltage switching technique is described that utilizes a resonant transition during a short but finite switching interval. This zero-voltage resonant-transition (ZVRT) switching technique can be applied to conventional buck, boost, and buck-boost power converter topologies that operate with a constant switching frequency and use pulsewidth modulation for output control. Since frequency-dependent losses are greatly reduced in the power transistors, efficient operation at higher switching frequencies (>1 MHz) is allowed. However, conduction losses are increased because ripple currents are increased and synchronous rectification is required. Experimental results are presented for an interleaved flyback converter that operates with ZVRT switching at 1 MHz.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A general unified approach to modelling switching-converter power stages
Middlebrook, R. D., & Cuk, S. (1976) · 1976 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1976.7072895 · Cited by 1,790
Resonant Switches - A Unified Approach to Improve Performances of Switching Converters
Liu, K.-H., & Lee, F. C. (1984) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.1984.4794149 · Cited by 156
Cited by
High-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
Lai, J.-S., & Nelson, D. J. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.890122 · Cited by 318
Soft-switching techniques in PWM converters
Hua, G., & Lee, F. C. (1995) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.475500 · Cited by 311
Bidirectional DC-DC converter modeling and unified controller with digital implementation
Zhang, J., Lai, J.-S., & Yu, W. (2008) · 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522963 · Cited by 115
Metadata
- Authors
- Henze, C. P., Martin, H. C., & Parsley, D. W.
- Venue
- APEC '88 Third Annual IEEE Applied Power Electronics Conference and Exposition
- Publisher
- IEEE
- Published
- 2003-01-06
- Pages
- 33-40
- OpenAlex
- W2167693997
- Cited by
- 286
- References
- 2
- FWCI
- 20.36
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Zero-voltage switching in high frequency power converters using pulse width modulation. https://app.cochat.ai/papers/10.1109/apec.1988.10548
- The paper
- Henze, C. P., Martin, H. C., & Parsley, D. W. (2003). Zero-voltage switching in high frequency power converters using pulse width modulation. APEC '88 Third Annual IEEE Applied Power Electronics Conference and Exposition. https://doi.org/10.1109/apec.1988.10548
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.