A low cost, triple-voltage bus DC-DC converter for automotive applications
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Before the automotive industry completes moving the 14 V vehicle loads to the 42 V net, HEVs and fuel cell vehicles will likely employ a triple voltage-14 V/42 V/high-voltage (200~500 V) bus system. This paper presents a low-cost, soft-switched, bidirectional DC/DC converter for connecting the three voltage nets. The converter consists of two half-brides and a high-frequency transformer, which provides voltage level matching and galvanic isolation between the two half-bridges for safety requirements. The use of dual half-bridges minimizes the number of switching devices and their associated gate drive components. Moreover, snubber capacitors and the transformer leakage inductance are utilized to achieve soft-switching. Therefore, no extra active switches or passive resonant components are required for softswitching, further reducing component count. Control of power flow among the three voltage buses is achieved by adjusting the duty ratio and phase angle between the half-bridge output voltages. Simulation and experimental data on a 2 kW lab unit are included to verify the power flow control scheme
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782 · cited 1×
“Furthermore, fuel cell powered vehicles will require a bidirectional dc/dc converter to interconnect the fuel cell powered H.V. bus and the low-voltage buses for vehicle auxiliary loads as shown in Fig.”
MethodSelf-citation
Cited by
An Isolated Three-Port Bidirectional DC-DC Converter With Decoupled Power Flow Management
Zhao, C., Round, S. D., & Kolar, J. W. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2002056 · Cited by 900
Family of multiport bidirectional DC–DC converters
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050362 · Cited by 488
Recent advances and challenges of fuel cell based power system architectures and control – A review
Das, V., Padmanaban, S., Venkitusamy, K., Selvamuthukumaran, R., Blaabjerg, F., & Siano, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.148 · Cited by 459
Review of Multiport Converters for Solar and Energy Storage Integration
Bhattacharjee, A. K., Kutkut, N., & Batarseh, I. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2830788 · Cited by 423
Operation, design and control of dual H-bridge-based isolated bidirectional DC–DC converter
Mi, C., Bai, H., Wang, C., & Gargies, S. (2008) · IET Power Electronics · doi:10.1049/iet-pel:20080004 · Cited by 405
Metadata
- Authors
- Su, G.-J., & Peng, F. Z.
- Venue
- Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005.
- Publisher
- IEEE
- Published
- 2005-06-28
- Volume
- 2
- Pages
- 1015-1021
- OpenAlex
- W2132367701
- Cited by
- 111
- References
- 1
- FWCI
- 14.88
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.