Development of a 90 kW Bi-Directional DC-DC Converter for Power Dense Applications
The DOI matches its Crossref record.
Abstract
This paper presents the relevancy, design, and test results of a 90 kW continuous duty, three-phase, bi-directional, and DC-DC converter for hybrid electric vehicles. Nominal low-side and high-side voltages of 320 V and 600 V, respectively, were used. Continuous boost-mode operation at 90 kW and continuous buck-mode operation at 45 kW were demonstrated using 80 degC (inlet temperature) Castrol 399 oil coolant. The volumetric power density of the three-phase test-bed was 2.7 kW/l in boost-mode at a coolant temperature of 80 degC. Based on two-phase tests, the power density at a coolant temperature of 25 degC is projected to be 4.1 kW/l To increase power level and power density, custom IGBT modules have been built and tested. A design layout for a packaged four-phase converter, using the custom IGBTs, including sensors and control hardware, indicates that a volumetric power density of above 4 kW/l is feasible at an 80 degC coolant temperature
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
Lai, J.-S., & Nelson, D. J. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.890122 · Cited by 318
“For the nonisolated case, high-power multiphase bidirectional dc–dc converters for HEV energy management systems were found in two-phase [25], [26] and three-phase [27], [28] configurations.”
BackgroundA review of non-isolated bidirectional dc-dc converters for energy storage systems
Tytelmaier, K., Husev, O., Veligorskyi, O., & Yershov, R. (2016) · 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF) · doi:10.1109/ysf.2016.7753752 · Cited by 174
Bidirectional DC-DC converter modeling and unified controller with digital implementation
Zhang, J., Lai, J.-S., & Yu, W. (2008) · 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522963 · Cited by 115
“INTRODUCTION The high power bidirectional dc-dc power converter has been widely used in hybrid electric vehicle and fuel cell applications [1-8].”
Method
Metadata
- Authors
- Urciuoli, D. P., & Tipton, C. W.
- Venue
- Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06.
- Publisher
- IEEE
- Published
- 2006-04-28
- Pages
- 1375-1378
- OpenAlex
- W2161697730
- Cited by
- 49
- References
- 0
- FWCI
- 6.37
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.