The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
GaN and SiC Based 500kHz Resonant Bidirectional DC/DC Design for 800V OBCM Application
Abstract
A 6.6kW 500kHz bidirectional isolated DC/DC converter based on GaN and SiC wide band gap (WBG) semiconductor devices is developed for 800V electric vehicle (EV) on-board charging, which is simpler and more reliable than the method of 800V output using multilevel topology. Firstly, the working characteristics of resonant DAB topology using phase-shift control are analyzed. Compared with the delay-time control strategy, it has the factures of narrow switching frequency range and small turn-off current, which is very suitable for high frequency applications of SiC devices. Secondly, a magnetic integrated high-frequency transformer was designed, and Maxwell software was adopted for simulation, comparison, and optimization. Compared with the traditional 90kHz transformer design, the volume was reduced by about 50%. Thirdly, based on the specifications of EV on-board charger, the loss breakdown calculation of the worst-case working condition of charging and discharging mode is carried out to verify the rationality of the design. Finally, based on water-cooled heat dissipation, a 500kHz 6.6kW 800V bidirectional DC/DC experimental platform was built. The full power output voltage range is form 550V to 900V, and the peak efficiency more than 98% at normal temperature, which verified the feasibility of the high-frequency hybrid application design of GaN and SiC devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Analysis and Design of High-Frequency Isolated Dual-Bridge Series Resonant DC/DC Converter
Li, X., & Bhat, A. K. S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2034662 · Cited by 493
Optimal Design and Tradeoff Analysis of Planar Transformer in High-Power DC–DC Converters
Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046005 · Cited by 393
He, P., Mallik, A., Sankar, A., & Khaligh, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2881276 · Cited by 154
Liu, G., Jang, Y., Jovanovi, M. M., & Zhang, J. Q. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2598173 · Cited by 124
Li, B., Lee, F. C., Li, Q., & Liu, Z. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931228 · Cited by 105
1MHz-1kW LLC Resonant Converter with Integrated Magnetics
Zhang, Y., Xu, D., Mino, K., & Sasagawa, K. (2007) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apex.2007.357630 · Cited by 75
Design optimization of high frequency transformer for dual active bridge DC-DC converter
Hoang, K. D., & Wang, J. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350205 · Cited by 65
Bay, O., Tran, M. T., Baghdadi, M. E., Chakraborty, S., & Hegazy, O. (2023) · Energies · doi:10.3390/en16083433 · Cited by 53
A Dual-Bridge DC–DC Resonant Converter Using Extended PWM and Phase-Shift Control
Hu, S., Li, X., & Zheng, Q.-F. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3072018 · Cited by 35
Cited by
Dutta, S., & Bauman, J. (2024) · IEEE Access · doi:10.1109/access.2024.3435463 · Cited by 37
“A bidirectional isolated DC-DC converter based on the resonant DAB topology is developed in [72] for 800 V onboard charging, and is shown in Fig.”
BackgroundMethodPérez, R. A. G., Muñoz-Cruzado-Alba, J., Galván-Díez, E., & Carrasco, J. M. (2024) · Electronics · doi:10.3390/electronics13234748 · Cited by 4
A Ringing Effect Mitigation Approach with Snubber Capacitors in a Dual Active Bridge Converter
Bossi, G., Campagna, N., Fedele, E., et al. (2024) · doi:10.1109/icaige62696.2024.10776660 · Cited by 2
“Indeed, GaN and SiC can achieve high switching frequency, allowing for accomplish improved ZVS condition and reducing the magnetic tank dimension [6], [7].”
Characterization of Current-Carrying Capacity in Printed Circuit Board Traces
Lieto, A. S., Cataldo, A. D., Spitaleri, M. G., et al. (2025) · doi:10.1109/ecce58356.2025.11260326
Liu, X., Chen, J., Wang, S. L., Wu, S., Jiang, Z., Radzi, M. A. M., Azis, N. B., Shafie, S. B., & Hua, M. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3651976 · Cited by 3
“This range aligns with those usedincurrentGaN-basedconverters[32],[33],andthe400kHz .”
Self-citation
Metadata
- Authors
- Jia, M., Sun, H., Cai, J., Zhang, H., Zhou, Z., & Chen, J.
- Affiliations
- Navitas Semiconductor,Shanghai EV Design Center,Shanghai,China
- Venue
- 2024 IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2024-02-25
- Pages
- 2425-2432
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W4396593767
- Cited by
- 7
- References
- 14
- Citations by year
- 2026: 3 · 2025: 1 · 2024: 3
- FWCI
- 5.35
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Keywords
- bidirectional DC-DC converter, resonant converter, GaN devices, SiC devices, wide bandgap semiconductors, electric vehicle charging, phase shift control, transformer design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: GaN and SiC Based 500kHz Resonant Bidirectional DC/DC Design for 800V OBCM Application. https://app.cochat.ai/papers/10.1109/apec48139.2024.10509331
- The paper
- Jia, M., Sun, H., Cai, J., Zhang, H., Zhou, Z., & Chen, J. (2024). GaN and SiC Based 500kHz Resonant Bidirectional DC/DC Design for 800V OBCM Application. 2024 IEEE Applied Power Electronics Conference and Exposition (APEC). https://doi.org/10.1109/apec48139.2024.10509331
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.