The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Spectrum Occupancy Measurements: A Survey and Use of Interference Maps
Abstract
In order to provide meaningful data about spectrum use, occupancy measurements describing the utilization rate of a specific frequency band should be conducted over a specific area instead of a single location. This paper presents a comprehensive methodology for the measurement and analysis of spectrum occupancy. This paper surveys spectrum measurement campaigns and associated interference maps, introducing the latter as a tool for spectrum analysis and management based on measurement data. An interference map characterizes the spectrum use by defining the level of interference over an area of interest in a certain frequency band. Building on findings from practical measurement studies, guidelines for spectrum occupancy measurements are given. While many scientific spectrum occupancy measurement papers tend to be too optimistic about the significance and generality of the results, we propose a cautionary perspective on drawing strong conclusions based on the often limited amount of data gathered. The different phases of the spectrum occupancy measurement and analysis process are described and a thorough discussion of interpolation methods is provided. Means to improve the measurement accuracy are discussed, especially regarding spatial domain considerations and the impact of the sampling interval on the results. A practical example of an improved measurement system design covering all the phases of the measurement process and used at the Turku, Finland; Blacksburg, VA, USA; and Chicago, IL, USA, spectrum observatories is given. Using the improved design, more realistic spectrum occupancy data can be obtained to lay the foundation for spectrum management decisions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction To Compressive Sampling
Candes, E. J., & Wakin, M. B. (2008) · IEEE Signal Processing Magazine · doi:10.1109/msp.2007.914731 · Cited by 10,017
Big Data: Survey, Technologies, Opportunities, and Challenges
Khan, N., Yaqoob, I., Hashem, I. A. T., Inayat, Z., Mahmoud Ali, W. K., Alam, M., Shiraz, M., & Gani, A. (2014) · The Scientific World Journal · doi:10.1155/2014/712826 · Cited by 547
Recent Advances in Wireless Indoor Localization Techniques and System
Farid, Z., Nordin, R., & Ismail, M. (2013) · Journal of Computer Networks and Communications · doi:10.1155/2013/185138 · Cited by 514
Cited by
Kulin, M., Kazaz, T., Moerman, I., & De Poorter, E. (2018) · IEEE Access · doi:10.1109/access.2018.2818794 · Cited by 364
Sharma, S. K., Bogale, T. E., Le, L. B., Chatzinotas, S., Wang, X., & Ottersten, B. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2773628 · Cited by 248
Metadata
- Authors
- Hoyhtya, M., Mammela, A., Eskola, M., Matinmikko, M., Kalliovaara, J., Ojaniemi, J., Suutala, J., Ekman, R., Bacchus, R., & Roberson, D.
- Venue
- IEEE Communications Surveys & Tutorials
- Published
- 2016
- Volume
- 18
- Issue
- 4
- Pages
- 2386-2414
- ISSN
- 1553-877X (ISSN-L)
- OpenAlex
- W2343899768
- Cited by
- 223
- References
- 3
- FWCI
- 28.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.