Unsupervised Feature Learning with Data Augmentation for Control Valve Stiction Detection
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
This paper proposes an unsupervised feature learning approach on industrial time series data for detection of valve stiction. Considering the commonly existed characteristics of industrial time series signals and the condition that sometimes massive reliable labeled-data are not available, a new time series data transformation and augmentation method is developed. The transformation stage converts the raw time series signals to 2-D matrices and the augmentation stage increases the diversity of the matrices by performing transformation on different timescales. Then a convolutional autoencoder is used to extract the representative features on the augmented data, these new features are taken as the inputs of the traditional clustering algorithms. Unlike the traditional approaches using hand-crafted features or requiring labeled-data, the proposed strategy can automatically learn features on the time series data collected from industrial control loops without supervision. The effectiveness of the proposed approach is evaluated through the International Stiction Data Base (ISDB). Compared with the traditional machine learning methods and deep learning based methods, the experimental results demonstrate that the proposed strategy outperforms the other methods. Besides performance evaluation, we provide a visualization process of feature learning via principal component analysis.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An Empirical Evaluation of Generic Convolutional and Recurrent Networks for Sequence Modeling
Bai, S., Kolter, J. Z., & Koltun, V. (2018) · arXiv · doi:10.48550/arxiv.1803.01271 · Cited by 4,655
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Fault diagnosis for rotating machinery using multiple sensors and convolutional neural networks
Xia, M., Li, T., Xu, L., Liu, L., & de Silva, C. W. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2728371 · Cited by 723 · cited 1×
“:3) velopment prospects in the feature representation of industrial TS data [16–18].”
BackgroundChoudhury, M. A. A. S., Thornhill, N. F., & Shah, S. L. (2004) · Control Engineering Practice · doi:10.1016/j.conengprac.2004.05.005 · Cited by 363
Using dynamic time warping distances as features for improved time series classification
Kate, R. J. (2016) · Data Mining and Knowledge Discovery · doi:10.1007/s10618-015-0418-x · Cited by 348
Diagnosis of poor control-loop performance using higher-order statistics
Choudhury, M. A. A. S., Shah, S. L., & Thornhill, N. F. (2004) · Automatica · doi:10.1016/j.automatica.2004.03.022 · Cited by 283
A simple method for detection of stiction in control valves
Horch, A. (1999) · Control Engineering Practice · doi:10.1016/s0967-0661(99)00100-8 · Cited by 226
A Curve Fitting Method for Detecting Valve Stiction in Oscillating Control Loops
He, Q. P., Wang, J., Pottmann, M., & Qin, S. J. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie061219a · Cited by 170
Practical Model and Detection Algorithm for Valve Stiction
Kano, M., Maruta, H., Kugemoto, H., & Shimizu, K. (2004) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)31917-1 · Cited by 170
Deep Coupled Dense Convolutional Network With Complementary Data for Intelligent Fault Diagnosis
Jiao, J., Zhao, M., Lin, J., & Ding, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2902817 · Cited by 169
Cited by
Self-Supervised Learning for Time Series Analysis: Taxonomy, Progress, and Prospects
Zhang, K., Wen, Q., Zhang, C., Cai, R., Jin, M., Liu, Y., Zhang, J. Y., Liang, Y., Pang, G., Song, D., et al. (2024) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2024.3387317 · Cited by 295
“[61] build a CNN-based autoencoder model and keep the encoder as a feature extractor after minimizing (5).”
BackgroundSelf-citation
Metadata
- Authors
- Zhang, K., & Liu, Y.
- Affiliations
- Zhejiang University (CN)
- Venue
- 2021 IEEE 10th Data Driven Control and Learning Systems Conference (DDCLS)
- Publisher
- IEEE
- Published
- 2021-05-14
- Pages
- 1385-1390
- OpenAlex
- W3175590945
- Cited by
- 4
- References
- 23
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 2
- FWCI
- 0.75
- Type
- conference paper
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Data Driven Control and Learning Systems Conference (DDCLS) (publishedVersion)
- Funders
- National Natural Science Foundation (NNSF) of China (61771193)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Computer Science › Signal Processing › Time Series Analysis and Forecasting
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Keywords
- unsupervised feature learning, data augmentation, convolutional autoencoder, clustering, feature visualization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Unsupervised Feature Learning with Data Augmentation for Control Valve Stiction Detection. https://app.cochat.ai/papers/10.1109/ddcls52934.2021.9455535
- The paper
- Zhang, K., & Liu, Y. (2021). Unsupervised Feature Learning with Data Augmentation for Control Valve Stiction Detection. 2021 IEEE 10th Data Driven Control and Learning Systems Conference (DDCLS). https://doi.org/10.1109/ddcls52934.2021.9455535
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.