The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Revisiting Memory Errors in Large-Scale Production Data Centers: Analysis and Modeling of New Trends from the Field
Open accessAbstract
Computing systems use dynamic random-access memory (DRAM) as main memory. As prior works have shown, failures in DRAM devices are an important source of errors in modern servers. To reduce the effects of memory errors, error correcting codes (ECC) have been developed to help detect and correct errors when they occur. In order to develop effective techniques, including new ECC mechanisms, to combat memory errors, it is important to understand the memory reliability trends in modern systems. In this paper, we analyze the memory errors in the entire fleet of servers at Facebook over the course of fourteen months, representing billions of device days. The systems we examine cover a wide range of devices commonly used in modern servers, with DIMMs manufactured by 4 vendors in capacities ranging from 2 GB to 24 GB that use the modern DDR3 communication protocol. We observe several new reliability trends for memory systems that have not been discussed before in literature. We show that (1) memory errors follow a power-law, specifically, a Pareto distribution with decreasing hazard rate, with average error rate exceeding median error rate by around 55×, (2) non-DRAM memory failures from the memory controller and memory channel cause the majority of errors, and the hardware and software overheads to handle such errors cause a kind of denial of service attack in some servers, (3) using our detailed analysis, we provide the first evidence that more recent DRAM cell fabrication technologies (as indicated by chip density) have substantially higher failure rates, increasing by 1.8× over the previous generation, (4) DIMM architecture decisions affect memory reliability: DIMMs with fewer chips and lower transfer widths have the lowest error rates, likely due to electrical noise reduction, (5) while CPU and memory utilization do not show clear trends with respect to failure rates, workload type can influence failure rate by up to 6:5×, suggesting certain memory access patterns may induce more errors, (6) we develop a model for memory reliability and show how system design choices such as using lower density DIMMs and fewer cores per chip can reduce failure rates of a baseline server by up to 57.7%, and (7) we perform the first implementation and real-system analysis of page offlining at scale, showing that it can reduce memory error rate by 67%, and identify several real-world impediments to the technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hosmer, D. W., & Lemeshow, S. (2000) · doi:10.1002/0471722146 · Cited by 20,302 · cited 1×
“We performed a logistic regression [15, 32] on a binary characteristic that represented whether a server was part of the error group or control group of servers (see Section II-E for our error and control group classification/formation).”
DRAM errors in the wild: a large-scale field study
Schroeder, B., Pinheiro, E., & Weber, W.-D. (2009) · Proceedings of the eleventh international joint conference on Measurement and modeling of computer systems · doi:10.1145/1555349.1555372 · Cited by 557
Flipping bits in memory without accessing them: An experimental study of DRAM disturbance errors
Kim, Y., Daly, R., Kim, J., Fallin, C., Lee, J. H., Lee, D., Wilkerson, C., Lai, K., & Mutlu, O. (2014) · 2014 ACM/IEEE 41st International Symposium on Computer Architecture (ISCA) · doi:10.1109/isca.2014.6853210 · Cited by 465
Self-citation
Cited by
Error Characterization, Mitigation, and Recovery in Flash-Memory-Based Solid-State Drives
Cai, Y., Ghose, S., Haratsch, E. F., Luo, Y., & Mutlu, O. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2713127 · Cited by 343
Self-citationProcessing data where it makes sense: Enabling in-memory computation
Mutlu, O., Ghose, S., Gómez-Luna, J., & Ausavarungnirun, R. (2019) · Microprocessors and Microsystems · doi:10.1016/j.micpro.2019.01.009 · Cited by 300
Self-citationThe Robustness of Modern Deep Learning Architectures against Single Event Upset Errors
Arechiga, A. P., & Michaels, A. J. (2018) · 2018 IEEE High Performance extreme Computing Conference (HPEC) · doi:10.1109/hpec.2018.8547532 · Cited by 47
Efficient Intra-Rack Resource Disaggregation for HPC Using Co-Packaged DWDM Photonics
Michelogiannakis, G., Arafa, Y., Cook, B., Dai, L. Y., Hameed Badawy, A.-H., Glick, M., Wang, Y., Bergman, K., & Shalf, J. (2023) · 2023 IEEE International Conference on Cluster Computing (CLUSTER) · doi:10.1109/cluster52292.2023.00021 · Cited by 13
Metadata
- Authors
- Meza, J., Wu, Q., Kumar, S., & Mutlu, O.
- Venue
- 2015 45th Annual IEEE/IFIP International Conference on Dependable Systems and Networks
- Publisher
- IEEE
- Published
- 2015-06
- Pages
- 415-426
- OpenAlex
- W1559781097
- Cited by
- 226
- References
- 3
- FWCI
- 19.47
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.