An integrated onboard charger and accessory power converter using WBG devices
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Integrating the function of onboard battery charging into the traction drive system and accessory dc-dc converter in plug-in electric vehicles (PEVs) is shown to significantly reduce the cost and increase the power density of onboard chargers due to a substantially reduced component count. Replacing silicon (Si) based power devices with wide-band-gap (WBG) devices can further increase the power density and efficiency and lower the cost as WBG device technology matures and production volume increases. This paper presents a bidirectional integrated onboard charger (OBC) and accessory power converter using silicon carbide (SiC) MOSFETs and Schottky Barrier Diodes (SBDs). The galvanically isolated integrated OBC is formed by using the segmented traction drive system of a PEV as the frond converter and a phase shifted dual-active full-bridge converter (PHDAFBC) that is comprised of the transformer and high voltage converter of the 14 V accessory dc-dc converter and an additional full-bridge converter. Experimental results for a 6.8 kW OBC prototype that is implemented on a 90 kW segmented SiC traction inverter and a 6.8 kW SiC PHDAFBC is included.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537 · cited 1×
“The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan). technology matures and production volume increases [13-17].”
Cited by
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773
“In [85], a 6.”
Raherimihaja, H. J., Zhang, Q., Xu, G., & Zhang, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2978684 · Cited by 45
On-Board Chargers for Electric Vehicles: A Comprehensive Performance and Efficiency Review
Dar, A. R., Haque, A., Khan, M. A., Kurukuru, V. S. B., & Mehfuz, S. (2024) · Energies · doi:10.3390/en17184534 · Cited by 45
“For the implementation of V2G [122], a dependable battery management system, and a precise state-of-charge predictions, and real-time grid data collection are very important [123].”
A review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26
Metadata
- Authors
- Su, G.-J., & Tang, L.
- Venue
- 2015 IEEE Energy Conversion Congress and Exposition (ECCE)
- Publisher
- IEEE
- Published
- 2015-09
- Pages
- 6306-6313
- OpenAlex
- W1925574192
- Cited by
- 26
- References
- 1
- FWCI
- 5.38
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An integrated onboard charger and accessory power converter using WBG devices. https://app.cochat.ai/papers/10.1109/ecce.2015.7310544
- The paper
- Su, G.-J., & Tang, L. (2015). An integrated onboard charger and accessory power converter using WBG devices. 2015 IEEE Energy Conversion Congress and Exposition (ECCE). https://doi.org/10.1109/ecce.2015.7310544
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.