On energy variations in modular multilevel converters with full-bridge submodules for Ac-Dc and Ac-Ac applications
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The modular multilevel converter is a promising topology for high-voltage high-power applications. By the series-connection of submodules it can generate high-quality voltage waveforms with low harmonic distortion at low switching frequencies. The submodules are low-voltage converters with capacitive energy storages. These capacitive energy storages are a driving factor of the size, weight, and cost of the converter. For this reason it is important to ensure that the stored energy in the converter is distributed as evenly among the submodules as possible. In this paper it is found that during nominal operating conditions, a large amount of energy is moved back and forth between the upper and lower arms in the converter. These energy oscillations can, however, be reduced or even eliminated if an appropriate modulation index or voltage ratio is used. It is also found that an appropriate modulation index or voltage ratio can reduce the power rating of the semiconductors as well. The theoretical findings are validated by simulating two systems with different voltage ratios for ac-ac conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New AC/AC Multilevel Converter Family
Glinka, M., & Marquardt, R. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.843973 · Cited by 772 · cited 1×
“If full-bridge submodules are used, the converter can be usd for ac-ac conversion [10] such as direct railway supplies [11, 12].”
MethodModular Multilevel Converter topologies with DC-Short circuit current limitation
Marquardt, R. (2011) · 8th International Conference on Power Electronics - ECCE Asia · doi:10.1109/icpe.2011.5944451 · Cited by 413 · cited 1×
“It is also possible to implement the submodules as clamp-double-submodules [14].”
BackgroundModular Multilevel Converter AC Motor Drives With Constant Torque From Zero to Nominal Speed
Antonopoulos, A., Angquist, L., Norrga, S., Ilves, K., Harnefors, L., & Nee, H.-P. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2286217 · Cited by 297 · cited 1×
“Introduction The modular multilevel converter (M2C) [1, 2] is a suitable topology for high-voltage high-power applications such as high-voltage direct current transmission [3, 4] and high-power motor drives [5, 6, 7, 8, 9].”
BackgroundSelf-citation
Cited by
Design and Operation of a Hybrid Modular Multilevel Converter
Zeng, R., Xu, L., Yao, L., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2320822 · Cited by 455
Optimized Design and Control for Hybrid MMC With Reduced Capacitance Requirements
Dong, P., Lyu, J., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2869400 · Cited by 37
Xu, S., Song, Q., Zhou, Y., Meng, J., Yang, W., Zhao, B., & Zeng, R. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2958495 · Cited by 33
Zhao, C., Lei, M., Hu, Y., Li, Z., Gao, F., Wang, P., & Li, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877088 · Cited by 32
Metadata
- Authors
- Ilves, K., Norrga, S., & Nee, H.-P.
- Venue
- 2013 15th European Conference on Power Electronics and Applications (EPE)
- Publisher
- IEEE
- Published
- 2013-09
- Pages
- 1-10
- OpenAlex
- W2107820305
- Cited by
- 61
- References
- 3
- FWCI
- 4.48
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.