A Case Study for a Digital Twin of Body-in-White Production Systems General Concept for Automated Updating of Planning Projects in the Digital Factory
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Increasing competition in the automotive industry makes cost-saving integration of more and more vehicle derivatives and variants such as sedans, coupes, cabriolets as well as electrical and combustion engine models into existing production systems necessary. At the same time, the production planners face a major challenge while integrating vehicle bodies-in-white. In contrast to the original concept and rough planning state, the automated production plants are continuously optimized during the detail planning phase as well as after the start of production as a result of improved processes and model upgrading. For fast integration of new vehicles, a current digital image of the real production plant - the so-called Digital Twin - is groundbreaking. This Digital Twin of a factory consists of a current bill of resources for cost calculation and a current layout planning state. The paper describes a concept for creating a Digital Twin of a body-in-white production system for the concept and rough planning projects. In the internal concept planning phase, planners do cost calculations and layouts for ordering factory suppliers. However, for integration planning, the original concept and rough planning project have to be updated. Therefore, a new concept has been developed which uses current information from the cyber-physical system and a current 3D scan to update the bill of resources and the layout planning on demand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
Cited by
Digital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2021) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 621
A survey on AI-driven digital twins in Industry 4.0: smart manufacturing and advanced robotics
Huang, Z., Shen, Y., Li, J., Fey, M., & Brecher, C. (2021) · Sensors · doi:10.3390/s21196340 · Cited by 418
An architecture of an intelligent digital twin in a cyber-physical production system
Ashtari Talkhestani, B., Jung, T., Lindemann, B., Sahlab, N., Jazdi, N., Schloegl, W., & Weyrich, M. (2019) · at - Automatisierungstechnik · doi:10.1515/auto-2019-0039 · Cited by 300
“…current geometry model, by applying 3D laser scan based on point cloud technology and 3D-tachymeter [36], or matching and mapping between the existing structural model of the mechanical equipment, called Bill of Equipment (BOE), and active devices, which can be read from the system network [37].”
MethodSelf-citationThe Facets of Digital Twins in Production and the Automotive Industry
Biesinger, F., & Weyrich, M. (2019) · 2019 23rd International Conference on Mechatronics Technology (ICMT) · doi:10.1109/icmect.2019.8932101 · Cited by 64
Self-citation
Metadata
- Authors
- Biesinger, F., Meike, D., Krass, B., & Weyrich, M.
- Venue
- 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA)
- Publisher
- IEEE
- Published
- 2018-09
- Pages
- 19-26
- OpenAlex
- W2899007640
- Cited by
- 48
- References
- 1
- FWCI
- 10.31
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Case Study for a Digital Twin of Body-in-White Production Systems General Concept for Automated Updating of Planning Projects in the Digital Factory. https://app.cochat.ai/papers/10.1109/etfa.2018.8502467
- The paper
- Biesinger, F., Meike, D., Krass, B., & Weyrich, M. (2018). A Case Study for a Digital Twin of Body-in-White Production Systems General Concept for Automated Updating of Planning Projects in the Digital Factory. 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA). https://doi.org/10.1109/etfa.2018.8502467
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.