The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Range Doppler detection for automotive FMCW radars
Abstract
The FMCW-Radar-Principle is widely used for automotive radar systems. The basic idea for FMCW-Radars is to generate a linear frequency ramp as transmit signal. The difference frequency between the transmitted and received signal is determined after downconversion. In order to detect range and velocity together, the information, extracted from one frequency ramp, is not enough, because it is ambiguous. Several subsequent ramps have to be generated to remove the ambiguity between the frequency portion produced by range and the doppler frequency. In this paper two methods are presented to perform this basic signal processing step. The two methods have the Fast Fourier Transform as basic calculation step in common, but the number of FFTs and their length are different. The requirements on bandwidth for the IF-Hardware and A/D-Converters are also determined by the algorithm for Range-Doppler-Detection. The CFAR (Constant False Alarm Rate)-Algorithm for target detection must also be adapted to the chosen method. Both methods have been verified with a 24 GHz radar prototype. The Radar-Frontend has been built with a newly developed SiGe-Radar-Chipset on Infineon's B7HF200-Process with a transition frequency of 200 GHz.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stove, A. G. (1992) · IEE Proceedings F Radar and Signal Processing · doi:10.1049/ip-f-2.1992.0048 · Cited by 1,047
Cited by
Design of an FMCW radar baseband signal processing system for automotive application
Lin, J.-J., Li, Y.-P., Hsu, W.-C., & Lee, T.-S. (2016) · SpringerPlus · doi:10.1186/s40064-015-1583-5 · Cited by 430
A universal 3D imaging sensor on a silicon photonics platform
Rogers, C., Piggott, A. Y., Thomson, D. J., Wiser, R. F., Opris, I. E., Fortune, S. A., Compston, A. J., Gondarenko, A., Meng, F., Chen, X., et al. (2021) · Nature · doi:10.1038/s41586-021-03259-y · Cited by 405
A Review and Perspective on Optical Phased Array for Automotive LiDAR
Hsu, C.-P., Li, B., Solano-Rivas, B., Gohil, A. R., Chan, P. H., Moore, A. D., & Donzella, V. (2021) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2020.3022948 · Cited by 314
Metadata
- Authors
- Winkler, V.
- Venue
- 2007 European Radar Conference
- Publisher
- IEEE
- Published
- 2007-10
- Pages
- 166-169
- OpenAlex
- W2163796592
- Cited by
- 298
- References
- 1
- FWCI
- 5.33
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Range Doppler detection for automotive FMCW radars. https://app.cochat.ai/papers/10.1109/eurad.2007.4404963
- The paper
- Winkler, V. (2007). Range Doppler detection for automotive FMCW radars. 2007 European Radar Conference. https://doi.org/10.1109/eurad.2007.4404963
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.