The DOI matches its Crossref record.
Direct torque control of permanent magnet drives
Abstract
Many permanent magnet motor drives use an open loop form of torque control, based on the assumption that output torque is proportional to applied current. In a practical motor this assumption may not always be correct, due to sub-optimal alignment of magnets, nonuniformity of magnetic material, current sensor nonlinearities and current controller limitations. These factors, together with nonoptimised current references, can lead to high values of torque ripple and copper loss. This paper describes a method of estimating the electromagnetic torque from the rate of change of co-energy with respect to position, thus taking account of mutual torque, reluctance torque and saturation effects. The paper shows how the estimator can be used in a direct torque control scheme. The direct torque controller maximises the torque/copper loss ratio. Implementation of the direct torque controller in a DSP based drive system is described, with steady-state and transient experimental results illustrating the effectiveness of the direct torque control scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Direct Torque Control of PWM Inverter-Fed AC Motors—A Survey
Buja, G. S., & Kazmierkowski, M. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.831717 · Cited by 1,267
Analysis of direct torque control in permanent magnet synchronous motor drives
Zhong, L., Rahman, M. F., Hu, W. Y., & Lim, K. W. (1997) · IEEE Transactions on Power Electronics · doi:10.1109/63.575680 · Cited by 951
Tang, L., Zhong, L., Rahman, M. F., & Hu, Y. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.823170 · Cited by 365
Rahman, M. F., Zhong, L., & Lim, K. W. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.738985 · Cited by 298
Rahman, M. F., Zhong, L., & Lim, K. W. (2002) · IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting · doi:10.1109/ias.1997.643010 · Cited by 259
Metadata
- Authors
- French, C., & Acarnley, P.
- Venue
- IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting
- Publisher
- IEEE
- Published
- 2002-11-19
- Volume
- 1
- Pages
- 199-206
- ISSN
- 0197-2618 (ISSN-L)
- OpenAlex
- W2056078466
- Cited by
- 205
- References
- 0
- FWCI
- 10.33
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Direct torque control of permanent magnet drives. https://app.cochat.ai/papers/10.1109/ias.1995.530302
- The paper
- French, C., & Acarnley, P. (2002). Direct torque control of permanent magnet drives. IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting. https://doi.org/10.1109/ias.1995.530302
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.