The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Guidelines for weighting factors design in Model Predictive Control of power converters and drives
Open accessAbstract
Model predictive control with a finite control set has emerged as a promising control tool for power converters and drives. One of the major advantages is the possibility to control several system variables with a single control law, by including them with appropriate weighting factors. However, at the present state of the art, these coefficients are determined empirically. There is no analytical or numerical method proposed yet to obtain an optimal solution. In addition, the empirical method is not always straightforward, and no procedures have been reported. This paper presents a first approach to a set of guidelines that reduce the uncertainty of this process. First a classification of different types of cost functions and weighting factors is presented. Then the different steps of the empirical process are explained. Finally, results for several power converters and drives applications are analyzed, which show the effectiveness of the proposed guidelines to reach appropriate weighting factors and control performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lee, J. H., Kaisare, N. S., & García, C. E. (2007) · Springer eBooks · doi:10.1002/9781394333325.fmatter · Cited by 3,766
Predictive Current Control of a Voltage Source Inverter
Rodriguez, J., Pontt, J., Silva, C. A., Correa, P., Lezana, P., Cortes, P., & Ammann, U. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888802 · Cited by 1,563
Self-citationCamacho, E. F., & Bordons, C. (1999) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-3398-8 · Cited by 1,151
Generalized predictive control (GPC)-ready for use in drive applications?
Kennel, R., Linder, A., & Linke, M. (2002) · 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230) · doi:10.1109/pesc.2001.954389 · Cited by 206
Cited by
Model Predictive Control—A Simple and Powerful Method to Control Power Converters
Kouro, S., Cortes, P., Vargas, R., Ammann, U., & Rodriguez, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2008349 · Cited by 1,975
Self-citationModel Predictive Control for Power Converters and Drives: Advances and Trends
Vazquez, S., Rodriguez, J., Rivera, M., Franquelo, L. G., & Norambuena, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2625238 · Cited by 1,859
Self-citationState of the Art of Finite Control Set Model Predictive Control in Power Electronics
Rodriguez, J., Kazmierkowski, M. P., Espinoza, J. R., Zanchetta, P., Abu-Rub, H., Young, H. A., & Rojas, C. A. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2221469 · Cited by 1,802
Self-citationModel Predictive Control: A Review of Its Applications in Power Electronics
Vazquez, S., Leon, J. I., Franquelo, L. G., Rodriguez, J., Young, H. A., Marquez, A., & Zanchetta, P. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2290138 · Cited by 1,191
Self-citationModel Predictive Current Control for PMSM Drives With Parameter Robustness Improvement
Zhang, X., Zhang, L., & Zhang, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2835835 · Cited by 608
Guidelines for the Design of Finite Control Set Model Predictive Controllers
Karamanakos, P., & Geyer, T. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2954357 · Cited by 585
Model Predictive Control of Power Electronic Systems: Methods, Results, and Challenges
Karamanakos, P., Liegmann, E., Geyer, T., & Kennel, R. (2020) · IEEE Open Journal of Industry Applications · doi:10.1109/ojia.2020.3020184 · Cited by 491
Model Predictive Control: MPC's Role in the Evolution of Power Electronics
Kouro, S., Perez, M. A., Rodriguez, J., Llor, A. M., & Young, H. A. (2015) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2015.2478920 · Cited by 472
Self-citationPredictive Control of a Modular Multilevel Converter for a Back-to-Back HVDC System
Qin, J., & Saeedifard, M. (2012) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2012.2191577 · Cited by 428
Finite-Control-Set Model Predictive Torque Control With a Deadbeat Solution for PMSM Drives
Xie, W., Wang, X., Wang, F., Xu, W., Kennel, R. M., Gerling, D., & Lorenz, R. D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2410767 · Cited by 394
Dragicevic, T., & Novak, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2875660 · Cited by 376
Yaramasu, V., & Wu, B. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292068 · Cited by 356
Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives
Wang, Y., Wang, X., Xie, W., Wang, F., Dou, M., Kennel, R. M., Lorenz, R. D., & Gerling, D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652338 · Cited by 320
Zhang, X., & Hou, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2691776 · Cited by 317
Donoso, F., Mora, A., Cardenas, R., Angulo, A., Saez, D., & Rivera, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2760840 · Cited by 289
Zhou, D., Yang, S., & Tang, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2863181 · Cited by 88
Metadata
- Authors
- Cortes, P., Kouro, S., La Rocca, B., Vargas, R., Rodriguez, J., Leon, J. I., Vazquez, S., & Franquelo, L. G.
- Venue
- 2009 IEEE International Conference on Industrial Technology
- Publisher
- IEEE
- Published
- 2009-02
- Pages
- 1-7
- OpenAlex
- W2040156374
- Cited by
- 702
- References
- 4
- FWCI
- 25.92
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.