The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Modeling, control and design optimization for a fully-actuated hexarotor aerial vehicle with tilted propellers
Abstract
Mobility of a hexarotor UAV in its standard configuration is limited, since all the propeller force vectors are parallel and they achieve only 4-DoF actuation, similar, e.g., to quadrotors. As a consequence, the hexarotor pose cannot track an arbitrary trajectory while the center of mass is tracking a position trajectory. In this paper, we consider a different hexarotor architecture where propellers are tilted, without the need of any additional hardware. In this way, the hexarotor gains a 6-DoF actuation which allows to independently reach positions and orientations in free space and to be able to exert forces on the environment to resist any wrench for aerial manipulation tasks. After deriving the dynamical model of the proposed hexarotor, we discuss the controllability and the tilt angle optimization to reduce the control effort for the specific task. An exact feedback linearization and decoupling control law is proposed based on the input-output mapping, considering the Jacobian and task acceleration, for non-linear trajectory tracking. The capabilities of our approach are shown by simulation results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geometric tracking control of a quadrotor UAV on SE(3)
Lee, T., Leok, M., & McClamroch, N. H. (2010) · 49th IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2010.5717652 · Cited by 1,376
Construction of Cubic Structures with Quadrotor Teams
Lindsey, Q., Mellinger, D., & Kumar, V. (2011) · doi:10.15607/rss.2011.vii.025 · Cited by 265
Modeling and control of a quadrotor UAV with tilting propellers
Ryll, M., Bulthoff, H. H., & Giordano, P. R. (2012) · 2012 IEEE International Conference on Robotics and Automation · doi:10.1109/icra.2012.6225129 · Cited by 255
Self-citationShared Control : Balancing Autonomy and Human Assistance with a Group of Quadrotor UAVs
Franchi, A., Secchi, C., Ryll, M., Bulthoff, H., & Giordano, P. (2012) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2012.2205625 · Cited by 207
Self-citationTrajectory Planning and Control for Planar Robots with Passive Last Joint
Luca, A. D., & Oriolo, G. (2002) · The International Journal of Robotics Research · doi:10.1177/027836402128964431 · Cited by 133
Modelling and control of a flying robot interacting with the environment
Marconi, L., Naldi, R., & Gentili, L. (2011) · Automatica · doi:10.1016/j.automatica.2011.09.020 · Cited by 107
The flying hand: A formation of UAVs for cooperative aerial tele-manipulation
Gioioso, G., Franchi, A., Salvietti, G., et al. (2014) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2014.6907490 · Cited by 102
Self-citationA nonlinear force observer for quadrotors and application to physical interactive tasks
Yüksel, B., Secchi, C., Bülthoff, H., & Franchi, A. (2014) · IEEE/ASME International Conference on Advanced Intelligent Mechatronics · doi:10.1109/aim.2014.6878116 · Cited by 88
Self-citationYüksel, B., Secchi, C., Bülthoff, H., & Franchi, A. (2014) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2014.6907782 · Cited by 65
Self-citation
Cited by
Kim, J., Kim, S., Ju, C., & Son, H. I. (2019) · IEEE Access · doi:10.1109/access.2019.2932119 · Cited by 612
Fundamental Actuation Properties of Multirotors: Force–Moment Decoupling and Fail–Safe Robustness
Michieletto, G., Ryll, M., & Franchi, A. (2018) · IEEE Transactions on Robotics · doi:10.1109/tro.2018.2821155 · Cited by 107
Self-citationIriarte, I., Gorostiza, J., Iglesias, I., Lasa, J., Calvo-Soraluze, H., & Sierra, B. (2024) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2024.104761 · Cited by 8
Metadata
- Authors
- Rajappa, S., Ryll, M., Bulthoff, H. H., & Franchi, A.
- Venue
- 2015 IEEE International Conference on Robotics and Automation (ICRA)
- Publisher
- IEEE
- Published
- 2015-05
- Pages
- 4006-4013
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W1584143882
- Cited by
- 279
- References
- 9
- FWCI
- 35.65
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling, control and design optimization for a fully-actuated hexarotor aerial vehicle with tilted propellers. https://app.cochat.ai/papers/10.1109/icra.2015.7139759
- The paper
- Rajappa, S., Ryll, M., Bulthoff, H. H., & Franchi, A. (2015). Modeling, control and design optimization for a fully-actuated hexarotor aerial vehicle with tilted propellers. 2015 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/icra.2015.7139759
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.