Direct LiDAR-Inertial Odometry: Lightweight LIO with Continuous-Time Motion Correction
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Aggressive motions from agile flights or traversing irregular terrain induce motion distortion in LiDAR scans that can degrade state estimation and mapping. Some methods exist to mitigate this effect, but they are still too simplistic or computationally costly for resource-constrained mobile robots. To this end, this paper presents Direct LiDAR-Inertial Odometry (DLIO), a lightweight LiDAR-inertial odometry algorithm with a new coarse-to-fine approach in constructing continuous-time trajectories for precise motion correction. The key to our method lies in the construction of a set of analytical equations which are parameterized solely by time, enabling fast and parallelizable point-wise deskewing. This method is feasible only because of the strong convergence properties in our nonlinear geometric observer, which provides provably correct state estimates for initializing the sensitive IMU integration step. Moreover, by simultaneously performing motion correction and prior generation, and by directly registering each scan to the map and bypassing scan-to-scan, DLIO's condensed architecture is nearly 20% more computationally efficient than the current state-of-the-art with a 12% increase in accuracy. We demonstrate DLIO's superior localization accuracy, map quality, and lower computational overhead as compared to four state-of-the-art algorithms through extensive tests using multiple public benchmark and self-collected datasets.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Past, Present, and Future of Simultaneous Localization and Mapping: Toward the Robust-Perception Age
Cadena, C., Carlone, L., Carrillo, H., Latif, Y., Scaramuzza, D., Neira, J., Reid, I., & Leonard, J. J. (2016) · IEEE Transactions on Robotics · doi:10.1109/tro.2016.2624754 · Cited by 3,596 · cited 1×
“However, there are still fundamental challenges in developing reliable and accurate LiDAR-centric algorithms [1], especially for robots that execute agile maneuvers or traverse uneven terrain.”
LOAM: Lidar Odometry and Mapping in Real-time
Zhang, J., & Singh, S. (2014) · Robotics: Science and Systems X · doi:10.15607/rss.2014.x.007 · Cited by 3,303
Lego-loam: Lightweight and ground-optimized lidar odometry and mapping on variable terrain
Shan, T., & Englot, B. (2018) · 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2018.8594299 · Cited by 2,295
On-Manifold Preintegration for Real-Time Visual--Inertial Odometry
Forster, C., Carlone, L., Dellaert, F., & Scaramuzza, D. (2017) · IEEE Transactions on Robotics · doi:10.1109/tro.2016.2597321 · Cited by 1,502 · cited 1×
“integration [29], which is subsequently refined by solving a set of analytical continuous-time equations in W (Fig.”
Metadata
- Authors
- Chen, K., Nemiroff, R., & Lopez, B. T.
- Venue
- 2023 IEEE International Conference on Robotics and Automation (ICRA)
- Publisher
- IEEE
- Published
- 2023-05-29
- Pages
- 3983-3989
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W4383109468
- Cited by
- 173
- References
- 4
- FWCI
- 95.33
- Type
- conference paper
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Direct LiDAR-Inertial Odometry: Lightweight LIO with Continuous-Time Motion Correction. https://app.cochat.ai/papers/10.1109/icra48891.2023.10160508
- The paper
- Chen, K., Nemiroff, R., & Lopez, B. T. (2023). Direct LiDAR-Inertial Odometry: Lightweight LIO with Continuous-Time Motion Correction. 2023 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/icra48891.2023.10160508
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.