The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Battery life estimation of mobile embedded systems
Abstract
Since battery life directly impacts the extent and duration of mobility, one of the key considerations in the design of a mobile embedded system should be to maximize the energy delivered by the battery, and hence the battery lifetime. To facilitate exploration of alternative implementations for a mobile embedded system, in this paper we address the issue of developing a fast and accurate battery model, and providing a framework for battery life estimation of Hardware/Software (HW/SW) embedded systems. We introduce a stochastic model of a battery, which can simultaneously model two key phenomena affecting the battery life and the amount of energy that can be delivered by the battery: the rate capacity effect and the recovery effect. We model the battery behavior mathematically in terms of parameters that can be related to physical characteristics of the electro-chemical cell. We show how this model can be used for battery life estimation of a HW/SW embedded system, by calculating battery discharge demand waveforms using a power co-estimation technique. Based on the discharge demand, the battery model estimates the battery lifetime as well as the delivered energy. Application of the battery life estimation methodology to three system implementations of an example TCP/IP network interface subsystem demonstrates that different system architectures can have significantly different delivered energy and battery lifetimes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 3×
“An accurate battery model, representingfine-grained electro-chemical phenomenonof cell dischar geusingPartial DifferentialEquations(PDE),waspresentedin [14].”
MethodInfluential
Cited by
Resilience-Oriented Critical Load Restoration Using Microgrids in Distribution Systems
Gao, H., Chen, Y., Xu, Y., & Liu, C.-C. (2016) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2550625 · Cited by 442
Battery modeling for energy-aware system design
Rao, R., Vrudhula, S., & Rakhmatov, D. N. (2003) · Computer · doi:10.1109/mc.2003.1250886 · Cited by 422
Self-citationAn analytical model for predicting the remaining battery capacity of lithium-ion batteries
Rong, P., & Pedram, M. (2006) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2006.876094 · Cited by 321
Battery-Driven System Design: A New Frontier in Low Power Design
Lahiri, K., Raghunathan, A., Dey, S., & Panigrahi, D. (2002) · doi:10.5555/832284.835514 · Cited by 316
Self-citationKim, T., & Qiao, W. (2011) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2167014 · Cited by 312
Metadata
- Authors
- Panigrahi, D., Chiasserini, C., Dey, S., Rao, R., Raghunathan, A., & Lahiri, K.
- Venue
- VLSI Design 2001. Fourteenth International Conference on VLSI Design
- Publisher
- IEEE
- Published
- 2001
- Pages
- 57-63
- OpenAlex
- W2134186542
- Cited by
- 204
- References
- 1
- FWCI
- 32.73
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Battery life estimation of mobile embedded systems. https://app.cochat.ai/papers/10.1109/icvd.2001.902640
- The paper
- Panigrahi, D., Chiasserini, C., Dey, S., Rao, R., Raghunathan, A., & Lahiri, K. (2001). Battery life estimation of mobile embedded systems. VLSI Design 2001. Fourteenth International Conference on VLSI Design. https://doi.org/10.1109/icvd.2001.902640
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.