Cited by 12Photovoltaic System Optimization TechniquesAdvanced DC-DC ConvertersSpacecraft Design and Technology

MPPT and SEPIC based controller development for energy utilisation in cubesats

Padma, Priya S, Radhika, A, Deepika, Vinothini T·2012·2012 Annual IEEE India Conference (INDICON)

Abstract

Cubesats fall in the line of miniature satellites that imparts nano technology in them. They are very compact in size of about 1000 cm3. A cubesat consists of Power Supply Unit (PSU), On Board Computer (OBC), Altitude Determination and Control System (ADCS), Communication System (COM), Camera (CAM) or the payload and other structural subsystem. In our paper we are in focus of the Electrical Power Supply Unit (EPS) that is responsible for the power transfer to the rest of the system. The PSU consist of solar panel, electronics and batteries. The objective of the paper is to design the controller circuit to track maximum power from the source. The conventional buck converter is replaced with the buck-boost converter which can be used for both as the step up and step down converter. Hence the MATLAB design of Maximum Peak Power Tracking in combination with the SEPIC converter is discussed further along with the proposed block diagram.

Integrity signals

Registry

Crossref · 10.1109/indcon.2012.6420604

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Xin et al. [150] and Sato et al. [151] have presented performance evaluation and prediction of InGaP/GaAs/Ge 3-J solar cells under the irradiation environment.

    “Xin et al. [150] and Sato et al. [151] have presented performance evaluation and prediction of InGaP/GaAs/Ge 3-J solar cells under the irradiation environment.”

    From A Comprehensive Review on Small Satellite Microgrids (2022) · cites this paper as [150]

  • By calculating the open-circuit voltage and the short-circuit current, the degradation curves show an accuracy of 5%, which is a good agreement with experimental data.

    “By calculating the open-circuit voltage and the short-circuit current, the degradation curves show an accuracy of 5%, which is a good agreement with experimental data.”

    From A Comprehensive Review on Small Satellite Microgrids (2022) · cites this paper as [150]

No citation lists for this paper

No citation lists for this paper yet — checked again daily.

References 7 · Cited by 12

Authors
Padma, P. S., Radhika, A., & Deepika, V. T.
Venue
2012 Annual IEEE India Conference (INDICON)
Publisher
IEEE
Published
2012-12
Pages
143-148
OpenAlex
W2548542583
Cited by
12
References
7
Citations by year
2026: 1 · 2025: 2 · 2022: 1 · 2021: 2 · 2020: 3 · 2019: 1 · 2015: 1 · 2014: 1
FWCI
1.35
Type
conference paper
Language
en
Open access
closed
Locations
IEEE India Conference (publishedVersion)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Photovoltaic System Optimization Techniques
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
Keywords
maximum power point tracking, SEPIC converter, buck-boost converter, spacecraft power management, solar panels, energy utilization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review