The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
An automated truck platoon for energy saving
Abstract
This paper presents an automated truck platoon that has been developed under a national ITS project named Energy ITS. The project, started in 2008, aims at energy saving and global warming prevention with ITS technologies. A platoon of 3 fully-automated trucks currently drives at 80 km/h with the gap of 10 m on a test truck and along an expressway before public use, under not only steady state driving but also lane changing. The lateral control is based on the lane marker detection by the computer vision, and the longitudinal control is based on the gap measurement by 76 GHz radar and lidar in addition to the inter-vehicle communications of 5.8 GHz DSRC. The radar and lidar also work as the obstacle detection. The feature of the technologies is the high reliability, aiming at the near future introduction. Fuel consumption measurement on a test track and along an expressway shows that the fuel can be saved by about 14 %. The evaluation simulation shows that the effectiveness of the platooning with the gap of 10 m when the 40 % penetration in heavy trucks is 2.1 % reduction of CO2along an expressway. The introduction scenario is also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gehring, O., & Fritz, H. (2002) · IEEE International Conference on Intelligent Transportation Systems (ITSC) · doi:10.1109/itsc.1997.660461 · Cited by 127
Organization and Operation of Electronically Coupled Truck Platoons on German Motorways
Kunze, R., Ramakers, R., Henning, K., & Jeschke, S. (2009) · Lecture notes in computer science · doi:10.1007/978-3-642-10817-4_13 · Cited by 71
AUTOMATED DRIVING SYSTEMS: COMMON GROUND OF AUTOMOBILES AND ROBOTS
Tsugawa, S. (2011) · International Journal of Humanoid Robotics · doi:10.1142/s0219843611002319 · Cited by 16
Self-citation
Cited by
Control of connected and automated vehicles: State of the art and future challenges
Guanetti, J., Kim, Y., & Borrelli, F. (2018) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2018.04.011 · Cited by 643
Platoon management with cooperative adaptive cruise control enabled by VANET
Amoozadeh, M., Deng, H., Chuah, C.-N., Zhang, H. M., & Ghosal, D. (2015) · Vehicular Communications · doi:10.1016/j.vehcom.2015.03.004 · Cited by 378
Cooperative Adaptive Cruise Control: Definitions and Operating Concepts
Shladover, S. E., Nowakowski, C., Lu, X.-Y., & Ferlis, R. (2015) · Transportation Research Record: Journal of the Transportation Research Board · doi:10.3141/2489-17 · Cited by 366
Zheng, Y., Li, S. E., Li, K., & Wang, L.-Y. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2483564 · Cited by 261
Lammert, M. P., Duran, A., Diez, J., Burton, K., & Nicholson, A. (2014) · SAE International Journal of Commercial Vehicles · doi:10.4271/2014-01-2438 · Cited by 252
Yang, C., Kwong, C. F., Chieng, D., Kar, P., Yau, K.-L. A., & Chen, Y. (2025) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2024.3440033 · Cited by 33
Metadata
- Authors
- Tsugawa, S., Kato, S., & Aoki, K.
- Venue
- 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems
- Publisher
- IEEE
- Published
- 2011-09
- Pages
- 4109-4114
- OpenAlex
- W2122029992
- Cited by
- 265
- References
- 3
- FWCI
- 10.20
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.