A case study of trajectory transfer through non-rigid registration for a simplified suturing scenario
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Suturing is an important yet time-consuming part of surgery. A fast and robust autonomous procedure could reduce surgeon fatigue, and shorten operation times. It could also be of particular importance for suturing in remote tele-surgery settings where latency can complicate the master-slave mode control that is the current practice for robotic surgery with systems like the da Vinci®. We study the applicability of the trajectory transfer algorithm proposed in [12] to the automation of suturing. The core idea of this procedure is to first use non-rigid registration to find a 3D warping function which maps the demonstration scene onto the test scene, then use this warping function to transform the robot end-effector trajectory. Finally a robot joint trajectory is generated by solving a trajectory optimization problem that attempts to find the closest feasible trajectory, accounting for external constraints, such as joint limits and obstacles. Our experiments investigate generalization from a single demonstration to differing initial conditions. A first set of experiments considers the problem of having a simulated Raven II system [5] suture two flaps of tissue together. A second set of experiments considers a PR2 robot performing sutures in a scaled-up experimental setup. The simulation experiments were fully autonomous. For the real-world experiments we provided human input to assist with the detection of landmarks to be fed into the registration algorithm. The success rate for learning from a single demonstration is high for moderate perturbations from the demonstration's initial conditions, and it gradually decreases for larger perturbations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Spline Models for Observational Data
Wahba, G. (1990) · doi:10.1137/1.9781611970128 · Cited by 4,184
A new point matching algorithm for non-rigid registration
Chui, H., & Rangarajan, A. (2003) · Computer Vision and Image Understanding · doi:10.1016/s1077-3142(03)00009-2 · Cited by 1,560 · cited 3×
“We use the method of Thin Plate Spline Robust Point Matching [1] to find both their correspondences, encoded by an index-mapping function Π(·) (which maps from indices of points in demonstration scene to indices of points in the test scene) and a warping function f mapping x1,x2, . . . ,xK to their partners x′Π(1),x ′…”
Method
Cited by
A guide to deep learning in healthcare
Esteva, A., Robicquet, A., Ramsundar, B., Kuleshov, V., DePristo, M., Chou, K., Cui, C., Corrado, G., Thrun, S., & Dean, J. (2019) · Nature Medicine · doi:10.1038/s41591-018-0316-z · Cited by 5,312
“Modern genomic technologies collect a wide variety of measurements, from an individual’s DNA sequence to the quantity of”
BackgroundModeling, learning, perception, and control methods for deformable object manipulation
Yin, H., Varava, A., & Kragic, D. (2021) · Science Robotics · doi:10.1126/scirobotics.abd8803 · Cited by 299
“Ropes (13, 14, 15) Fabrics (16, 17) Simple to implement Lacking physical interpretability Sponges (17, 18) Rubber spheres (18 where k j denotes the stiffness of the j th constraint C j ( x 1 , x 2 , …, x n ) = 0, j = 1,2, ….”
BackgroundMethodInfluentialA Review of Physics Simulators for Robotic Applications
Collins, J., Chand, S., Vanderkop, A., & Howard, D. (2021) · IEEE Access · doi:10.1109/access.2021.3068769 · Cited by 276
Attanasio, A., Scaglioni, B., De Momi, E., Fiorini, P., & Valdastri, P. (2021) · Annual Review of Control, Robotics, and Autonomous Systems · doi:10.1146/annurev-control-062420-090543 · Cited by 263
Combining self-supervised learning and imitation for vision-based rope manipulation
Nair, A., Chen, D., Agrawal, P., Isola, P., Abbeel, P., Malik, J., & Levine, S. (2017) · 2017 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2017.7989247 · Cited by 255
Self-citation
Metadata
- Authors
- Schulman, J., Gupta, A., Venkatesan, S., Tayson-Frederick, M., & Abbeel, P.
- Venue
- 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems
- Publisher
- IEEE
- Published
- 2013-11
- Pages
- 4111-4117
- OpenAlex
- W2025468671
- Cited by
- 84
- References
- 2
- FWCI
- 6.85
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A case study of trajectory transfer through non-rigid registration for a simplified suturing scenario. https://app.cochat.ai/papers/10.1109/iros.2013.6696945
- The paper
- Schulman, J., Gupta, A., Venkatesan, S., Tayson-Frederick, M., & Abbeel, P. (2013). A case study of trajectory transfer through non-rigid registration for a simplified suturing scenario. 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems. https://doi.org/10.1109/iros.2013.6696945
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.