The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
An overview of calibration technology of industrial robots
Abstract
With the continuous improvement of automation, industrial robots have become an indispensable part of automated production lines. They widely used in a number of industrial production activities, such as spraying, welding, handling, etc., and have a great role in these sectors. Recently, the robotic technology is developing towards high precision, high intelligence. Robot calibration technology has a great significance to improve the accuracy of robot. However, it has much work to be done in the identification of robot parameters. The parameter identification work of existing serial and parallel robots is introduced. On the one hand, it summarizes the methods for parameter calibration and discusses their advantages and disadvantages. On the other hand, the application of parameter identification is introduced. This overview has a great reference value for robot manufacturers to choose proper identification method, points further research areas for researchers. Finally, this paper analyzes the existing problems in robot calibration, which may be worth researching in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent progress on programming methods for industrial robots
Pan, Z., Polden, J., Larkin, N., Van Duin, S., & Norrish, J. (2012) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2011.08.004 · Cited by 535
An overview of dynamic parameter identification of robots
Wu, J., Wang, J., & You, Z. (2010) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2010.03.013 · Cited by 415
Human–Robot Interaction Control of Rehabilitation Robots With Series Elastic Actuators
Yu, H., Huang, S., Chen, G., Pan, Y., & Guo, Z. (2015) · IEEE Transactions on Robotics · doi:10.1109/tro.2015.2457314 · Cited by 356
A survey of Tactile Human–Robot Interactions
Argall, B. D., & Billard, A. G. (2010) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2010.07.002 · Cited by 350
Kinematic-Parameter Identification for Serial-Robot Calibration Based on POE Formula
He, R., Zhao, Y., Shu-nian, Y., & Yang, S. (2010) · IEEE Transactions on Robotics · doi:10.1109/tro.2010.2047529 · Cited by 328
Parameter identification for industrial robots with a fast and robust trajectory design approach
Jin, J., & Gans, N. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2014.06.004 · Cited by 192
A New Closed-Loop Output Error Method for Parameter Identification of Robot Dynamics
Gautier, M., Janot, A., & Vandanjon, P.-O. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2185697 · Cited by 191
Determination of the Identifiable Parameters in Robot Calibration Based on the POE Formula
Chen, G., Wang, H., & Lin, Z. (2014) · IEEE Transactions on Robotics · doi:10.1109/tro.2014.2319560 · Cited by 185
A minimal kinematic model for serial robot calibration using POE formula
Yang, X., Wu, L., Li, J., & Chen, K. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2013.11.002 · Cited by 178
Identification of the manipulator stiffness model parameters in industrial environment
Klimchik, A. S., Furet, B., Caro, S., & Pashkevich, A. (2015) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2015.03.002 · Cited by 158
Cited by
An overview of data-driven battery health estimation technology for battery management system
Chen, M., Ma, G., Liu, W., Zeng, N., & Luo, X. (2023) · Neurocomputing · doi:10.1016/j.neucom.2023.02.031 · Cited by 172
Self-citation
Metadata
- Authors
- Li, Z., Li, S., & Luo, X.
- Venue
- IEEE/CAA Journal of Automatica Sinica
- Published
- 2021-01
- Volume
- 8
- Issue
- 1
- Pages
- 23-36
- ISSN
- 2329-9266 (ISSN-L)
- 2329-9274
- OpenAlex
- W3108449827
- Cited by
- 387
- References
- 31
- FWCI
- 27.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An overview of calibration technology of industrial robots. https://app.cochat.ai/papers/10.1109/jas.2020.1003381
- The paper
- Li, Z., Li, S., & Luo, X. (2021). An overview of calibration technology of industrial robots. IEEE/CAA Journal of Automatica Sinica. https://doi.org/10.1109/jas.2020.1003381
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.