The DOI matches its Crossref record.
Design of a Hybrid RF Fingerprint Extraction and Device Classification Scheme
Abstract
Radio frequency (RF) fingerprint is the inherent hardware characteristics and has been employed to classify and identify wireless devices in many Internet of Things applications. This paper extracts novel RF fingerprint features, designs a hybrid and adaptive classification scheme adjusting to the environment conditions, and carries out extensive experiments to evaluate the performance. In particular, four modulation features, namely differential constellation trace figure, carrier frequency offset, modulation offset and I/Q offset extracted from constellation trace figure, are employed. The feature weights under different channel conditions are calculated at the training stage. These features are combined smartly with the weights selected according to the estimated signal to noise ratio at the classification stage. We construct a testbed using universal software radio peripheral platform as the receiver and 54 ZigBee nodes as the candidate devices to be classified, which are the most ZigBee devices ever tested. Extensive experiments are carried out to evaluate the classification performance under different channel conditions, namely line-of-sight (LOS) and nonline-of-sight scenarios. We then validate the robustness by carrying out the classification process 18 months after the training, which is the longest time gap. We also use a different receiver platform for classification for the first time. The classification error rate is as low as 0.048 in LOS scenario, and 0.1105 even when a different receiver is used for classification 18 months after the training. Our hybrid classification scheme has thus been demonstrated effective in classifying a large amount of ZigBee devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Towards Scalable and Channel-Robust Radio Frequency Fingerprint Identification for LoRa
Shen, G., Zhang, J., Marshall, A., & Cavallaro, J. R. (2022) · IEEE Transactions on Information Forensics and Security · doi:10.1109/tifs.2022.3152404 · Cited by 374
Self-citationSankhe, K., Belgiovine, M., Zhou, F., Angioloni, L., Restuccia, F., D'Oro, S., Melodia, T., Ioannidis, S., & Chowdhury, K. (2020) · IEEE Transactions on Cognitive Communications and Networking · doi:10.1109/tccn.2019.2949308 · Cited by 256
A Robust RF Fingerprinting Approach Using Multisampling Convolutional Neural Network
Yu, J., Hu, A., Li, G., & Peng, L. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2911347 · Cited by 253
Self-citationRadio Frequency Fingerprints Extraction for LTE-V2X: A Channel Estimation Based Methodology
Chen, T., Shen, H., Hu, A., He, W., Xu, J., & Hu, H. (2022) · 2022 IEEE 96th Vehicular Technology Conference (VTC2022-Fall) · doi:10.1109/vtc2022-fall57202.2022.10012865 · Cited by 22
Self-citation
Metadata
- Authors
- Peng, L., Hu, A., Zhang, J., Jiang, Y., Yu, J., & Yan, Y.
- Venue
- IEEE Internet of Things Journal
- Published
- 2019-02
- Volume
- 6
- Issue
- 1
- Pages
- 349-360
- ISSN
- 2327-4662 (ISSN-L)
- 2372-2541
- OpenAlex
- W2803989302
- Cited by
- 303
- References
- 0
- FWCI
- 13.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of a Hybrid RF Fingerprint Extraction and Device Classification Scheme. https://app.cochat.ai/papers/10.1109/jiot.2018.2838071
- The paper
- Peng, L., Hu, A., Zhang, J., Jiang, Y., Yu, J., & Yan, Y. (2019). Design of a Hybrid RF Fingerprint Extraction and Device Classification Scheme. IEEE Internet of Things Journal. https://doi.org/10.1109/jiot.2018.2838071
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.