Laser Frequency Combs for Coherent Optical Communications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
Laser frequency combs with repetition rates on the order of 10 GHz and higher can be used as multi-carrier sources in wavelength-division multiplexing (WDM). They allow replacing tens of tunable continuous-wave lasers by a single laser source. In addition, the comb's line spacing stability and broadband phase coherence enable signal processing beyond what is possible with an array of independent lasers. Modern WDM systems operate with advanced modulation formats and coherent receivers. This introduces stringent requirements in terms of signal-to-noise ratio, power per line, and optical linewidth which can be challenging to attain for frequency comb sources. Here, we set quantitative benchmarks for these characteristics and discuss tradeoffs in terms of transmission reach and achievable data rates. We also highlight recent achievements for comb-based superchannels, including >10 Tb/s transmission with extremely high spectral efficiency, and the possibility to significantly simplify the coherent receiver by realizing joint digital signal processing. We finally discuss advances with microresonator frequency combs and compare their performance in terms of flatness and conversion efficiency against state-of-the-art electro-optic frequency comb generators. This contribution provides guidelines for developing frequency comb sources in coherent fiber-optic communication systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jones, D. J., Diddams, S. A., Ranka, J. K., Stentz, A., Windeler, R. S., Hall, J. L., & Cundiff, S. T. (2000) · Science · doi:10.1126/science.288.5466.635 · Cited by 2,661
Ludlow, A. D., Boyd, M. M., Ye, J., Peik, E., & Schmidt, P. O. (2015) · Reviews of Modern Physics · doi:10.1103/revmodphys.87.637 · Cited by 2,385
Temporal solitons in optical microresonators
Herr, T., Brasch, V., Jost, J. D., Wang, C. Y., Kondratiev, N. M., Gorodetsky, M. L., & Kippenberg, T. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.343 · Cited by 2,122 · cited 1×
“dissipative Kerr solitons [50], which have a very smooth spectral envelope but relatively poor power conversion efficiency [51], and mode-locked dark pulses [52], which feature much higher”
Microresonator-based solitons for massively parallel coherent optical communications
Marin-Palomo, P., Kemal, J. N., Karpov, M., Kordts, A., Pfeifle, J., Pfeiffer, M. H. P., Trocha, P., Wolf, S., Brasch, V., Anderson, M. H., et al. (2017) · Nature · doi:10.1038/nature22387 · Cited by 1,398 · cited 3×
“microresonators demonstrate that it is possible to achieve these requirements with 100 GHz combs specifically designed for ultra-high channel count [35].”
Optical Frequency Synthesizer for Precision Spectroscopy
Holzwarth, R., Udem, T., Hänsch, T. W., Knight, J. C., Wadsworth, W. J., & Russell, P. S. J. (2000) · Physical Review Letters · doi:10.1103/physrevlett.85.2264 · Cited by 1,225 · cited 1×
“Key developments in the 90s allowed establishing a coherent link between the frequency comb lines and atomic frequency references [1,2].”
CMOS-compatible multiple-wavelength oscillator for on-chip optical interconnects
Levy, J. S., Gondarenko, A., Foster, M. A., Turner-Foster, A. C., Gaeta, A. L., & Lipson, M. (2010) · Nature Photonics · doi:10.1038/nphoton.2009.259 · Cited by 1,145 · cited 1×
“Microresonator frequency combs (or microcombs in short) developed using silicon nitride [45]”
Rapid and precise absolute distance measurements at long range
Coddington, I., Swann, W. C., Nenadovic, L., & Newbury, N. R. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.94 · Cited by 1,059 · cited 1×
“, broadband molecular spectroscopy [4], the synthesis of pure microwaves [5] and light detection and ranging [6].”
Fundamentals of Coherent Optical Fiber Communications
Kikuchi, K. (2016) · Journal of Lightwave Technology · doi:10.1109/jlt.2015.2463719 · Cited by 1,041 · cited 1×
“and the fundamentals of coherent optical communications [28] apply equally.”
Generation of ultrastable microwaves via optical frequency division
Fortier, T. M., Kirchner, M. S., Quinlan, F., Taylor, J., Bergquist, J. C., Rosenband, T., Lemke, N., Ludlow, A., Jiang, Y., Oates, C. W., et al. (2011) · Nature Photonics · doi:10.1038/nphoton.2011.121 · Cited by 887 · cited 1×
“, broadband molecular spectroscopy [4], the synthesis of pure microwaves [5] and light detection and ranging [6].”
Coherent Multiheterodyne Spectroscopy Using Stabilized Optical Frequency Combs
Coddington, I., Swann, W., & Newbury, N. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.013902 · Cited by 821 · cited 1×
“, broadband molecular spectroscopy [4], the synthesis of pure microwaves [5] and light detection and ranging [6].”
Mode-locked dark pulse Kerr combs in normal-dispersion microresonators
Xue, X., Xuan, Y., Liu, Y., Wang, P.-H., Chen, S., Wang, J., Leaird, D. E., Qi, M., & Weiner, A. M. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.137 · Cited by 751 · cited 1×
“dissipative Kerr solitons [50], which have a very smooth spectral envelope but relatively poor power conversion efficiency [51], and mode-locked dark pulses [52], which feature much higher”
Coherent terabit communications with microresonator Kerr frequency combs
Pfeifle, J., Brasch, V., Lauermann, M., Yu, Y., Wegner, D., Herr, T., Hartinger, K., Schindler, P., Li, J., Hillerkuss, D., et al. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.57 · Cited by 744 · cited 1×
“fiber-based actively mode-locked lasers [16,22] and microresonator frequency combs [23,24].”
High spectral purity Kerr frequency comb radio frequency photonic oscillator
Liang, W., Eliyahu, D., Ilchenko, V. S., Savchenkov, A. A., Matsko, A. B., Seidel, D., & Maleki, L. (2015) · Nature Communications · doi:10.1038/ncomms8957 · Cited by 676
On the Extended Relationships Among EVM, BER and SNR as Performance Metrics
Shafik, R. A., Rahman, M. S., & Islam, A. R. (2006) · 2006 International Conference on Electrical and Computer Engineering · doi:10.1109/icece.2006.355657 · Cited by 633 · cited 5×
“(a) Achievable bit error ratio as function of signal to noise ratio for different M-ary quadrature amplitude modulation (QAM) [32].”
InfluentialOptical frequency comb technology for ultra‐broadband radio‐frequency photonics
Torres‐Company, V., & Weiner, A. M. (2014) · Laser & Photonics Reviews · doi:10.1002/lpor.201300126 · Cited by 565 · cited 1×
“[19], gain-switched laser diodes [20], semiconductor-waveguide passively mode-locked lasers [21], fiber-based actively modelocked lasers [16], [22] and microresonator frequency combs”
Self-citationHigh-Spectral-Efficiency Optical Modulation Formats
Winzer, P. J. (2012) · Journal of Lightwave Technology · doi:10.1109/jlt.2012.2212180 · Cited by 405 · cited 11×
“This comes at the expense of a higher requirement in signal to noise ratio (SNR) [29].”
InfluentialReplacing the Soft-Decision FEC Limit Paradigm in the Design of Optical Communication Systems
Alvarado, A., Agrell, E., Lavery, D., Maher, R., & Bayvel, P. (2015) · Journal of Lightwave Technology · doi:10.1109/jlt.2015.2450537 · Cited by 357
Microresonator Kerr frequency combs with high conversion efficiency
Xue, X., Wang, P., Xuan, Y., Qi, M., & Weiner, A. M. (2017) · Laser & Photonics Reviews · doi:10.1002/lpor.201600276 · Cited by 274 · cited 1×
“conversion efficiency [53] but at the expense of large power variations among lines.”
Single-source chip-based frequency comb enabling extreme parallel data transmission
Hu, H., Da Ros, F., Pu, M., Ye, F., Ingerslev, K., Porto da Silva, E., Nooruzzaman, M., Amma, Y., Sasaki, Y., Mizuno, T., et al. (2018) · Nature Photonics · doi:10.1038/s41566-018-0205-5 · Cited by 264 · cited 1×
“[19], gain-switched laser diodes [20], semiconductor-waveguide passively mode-locked lasers [21], fiber-based actively modelocked lasers [16], [22] and microresonator frequency combs”
Pfeiffer, M. H. P., Liu, J., Raja, A. S., Morais, T., Ghadiani, B., & Kippenberg, T. J. (2018) · Optica · doi:10.1364/optica.5.000884 · Cited by 254 · cited 1×
“The microresonators are optimized in terms of coupling rate and dispersion [35], [54], considering intrinsic quality factors of ten million, which can be realized based on recent fabrication developments [55], [56].”
Replacing the Soft-Decision FEC Limit Paradigm in the Design of Optical Communication Systems
Alvarado, A., Agrell, E., Lavery, D., Maher, R., & Bayvel, P. (2016) · Journal of Lightwave Technology · doi:10.1109/jlt.2015.2482718 · Cited by 254 · cited 1×
“mutual information (GMI) [30], [31], which will be used in this paper.”
High-Q silicon nitride microresonators exhibiting low-power frequency comb initiation
Xuan, Y., Liu, Y., Varghese, L. T., Metcalf, A. J., Xue, X., Wang, P.-H., Han, K., Jaramillo-Villegas, J. A., Al Noman, A., Wang, C., et al. (2016) · Optica · doi:10.1364/optica.3.001171 · Cited by 248 · cited 1×
“The microresonators are optimized in terms of coupling rate and dispersion [35], [54], considering intrinsic quality factors of ten million, which can be realized based on recent fabrication developments [55], [56].”
High-order coherent communications using mode-locked dark-pulse Kerr combs from microresonators
Fülöp, A., Mazur, M., Lorences-Riesgo, A., Helgason, Ó. B., Wang, P.-H., Xuan, Y., Leaird, D. E., Qi, M., Andrekson, P. A., Weiner, A. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04046-6 · Cited by 240 · cited 1×
“ful transmission of advanced modulation formats [17], [35], [47], [48].”
Self-citationOvercoming Kerr-induced capacity limit in optical fiber transmission
Temprana, E., Myslivets, E., Kuo, B. P.-P., Liu, L., Ataie, V., Alić, N., & Radic, S. (2015) · Science · doi:10.1126/science.aab1781 · Cited by 236 · cited 1×
“channel linear crosstalk [12], compensation of nonlinear impairments in the fiber link by proper waveform shaping [13] or digital pre-distortion [14], [15], and the achievement of densely”
High-Power Broadly Tunable Electrooptic Frequency Comb Generator
Metcalf, A. J., Torres-Company, V., Leaird, D. E., & Weiner, A. M. (2013) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2013.2268384 · Cited by 233 · cited 2×
“combs that are continuously tunable and whose repetition rate can be set by a microwave signal, such as electro-optic combs [34], but it introduces fabrication challenges for integrated fre-”
Self-citationHigh-Order Coherent Communications Using Modelocked Dark-Pulse Kerr Combs from Microresonators
Fülöp, A., Mazur, M., Lorences-Riesgo, A., Helgason, Ó. B., Wang, P.-H., Xuan, Y., Leaird, D. E., Qi, M., Andrekson, P. A., Weiner, A. M., et al. (2018) · Purdue e-Pubs (Purdue University System) · Cited by 233
Self-citationNonlinear conversion efficiency in Kerr frequency comb generation
Bao, C., Zhang, L., Matsko, A., Yan, Y., Zhao, Z., Xie, G., Agarwal, A. M., Kimerling, L. C., Michel, J., Maleki, L., et al. (2014) · Optics Letters · doi:10.1364/ol.39.006126 · Cited by 169 · cited 1×
“dissipative Kerr solitons [50], which have a very smooth spectral envelope but relatively poor power conversion efficiency [51], and mode-locked dark pulses [52], which feature much higher”
System-on-Chip Photonic Integrated Circuits
Kish, F., Lal, V., Evans, P., Corzine, S. W., Ziari, M., Butrie, T., Reffle, M., Tsai, H.-S., Dentai, A., Pleumeekers, J., et al. (2018) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2017.2717863 · Cited by 168 · cited 1×
“replicating the transmitter and rotating its polarization after the last multiplexing stage [27].”
Single-Laser 325 Tbit/s Nyquist WDM Transmission
Hillerkuss, D., Schmogrow, R., Meyer, M., Wolf, S., Jordan, M., Kleinow, P., Lindenmann, N., Schindler, P. C., Melikyan, A., Yang, X., et al. (2012) · Journal of Optical Communications and Networking · doi:10.1364/jocn.4.000715 · Cited by 156 · cited 2×
“[19], gain-switched laser diodes [20], semiconductor-waveguide passively mode-locked lasers [21], fiber-based actively modelocked lasers [16], [22] and microresonator frequency combs”
Over-1000-channel ultradense WDM transmission with supercontinuum multicarrier source
Ohara, T., TAKARA, H., Yamamoto, T., Masuda, H., Morioka, T., Abe, M., & Takahashi, H. (2006) · Journal of Lightwave Technology · doi:10.1109/jlt.2006.874548 · Cited by 149 · cited 2×
“These demands offer opportunities for alternative frequency comb platforms [18], such as those based on electro-optic modulation of continuous-wave lasers [8], [17],”
A Survey of Optical Carrier Generation Techniques for Terabit Capacity Elastic Optical Networks
Imran, M., Anandarajah, P. M., Kaszubowska-Anandarajah, A. M., Sambo, N., & Potì, L. (2017) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2775039 · Cited by 145 · cited 1×
“These demands offer opportunities for alternative frequency comb platforms [18], such as those based on electro-optic modulation of continuous-wave lasers [8], [17],”
Lossless equalization of frequency combs
Láncis, J., & Andrés, P. (2008) · Optics Letters · doi:10.1364/ol.33.001822 · Cited by 121 · cited 1×
“The EO comb is modelled by considering an intensity modulator followed by a set of phase modulators [49].”
Frequency Comb-Based WDM Transmission Systems Enabling Joint Signal Processing
Lundberg, L., Karlsson, M., Lorences-Riesgo, A., Mazur, M., Schröder, J., & Andrekson, P. A. (2018) · Applied Sciences · doi:10.3390/app8050718 · Cited by 118 · cited 2×
“, relax the linewidth requirements [25].”
Self-citationFlexible terabit/s Nyquist-WDM super-channels using a gain-switched comb source
Pfeifle, J., Vujicic, V., Watts, R. T., Schindler, P. C., Weimann, C., Zhou, R., Freude, W., Barry, L. P., & Koos, C. G. (2015) · Optics Express · doi:10.1364/oe.23.000724 · Cited by 102 · cited 1×
“[19], gain-switched laser diodes [20], semiconductor-waveguide passively mode-locked lasers [21], fiber-based actively modelocked lasers [16], [22] and microresonator frequency combs”
Long-haul coherent communications using microresonator-based frequency combs
Fülöp, A., Mazur, M., Lorences-Riesgo, A., Eriksson, T. A., Wang, P.-H., Xuan, Y., Leaird, D. E., Qi, M., Andrekson, P. A., & Weiner, A. M. (2017) · Optics Express · doi:10.1364/oe.25.026678 · Cited by 57 · cited 1×
“…frequency comb platforms [18], such as those based on electro-optic modulation of continuous-wave lasers [8,17,19], gain-switched laser diodes [20], semiconductor-waveguide passively mode-locked lasers [21], fiber-based actively mode-locked lasers [16,22] and microresonator frequency combs [23,24].”
Self-citationMazur, M., Lorences-Riesgo, A., Schröder, J., Andrekson, P. A., & Karlsson, M. (2017) · Journal of Lightwave Technology · doi:10.1109/jlt.2017.2786750 · Cited by 49 · cited 5×
“packed superchannels for multi-terabit-per-second transmitters [16], [17].”
InfluentialSelf-citationMultidimensional Modulation and Coding in Optical Transport
Karlsson, M., & Agrell, E. (2016) · Journal of Lightwave Technology · doi:10.1109/jlt.2016.2615124 · Cited by 41 · cited 10×
“Here, we give a different insight by analyzing the impact of the phase noise on the GMI for different M-ary constellations (Fig.”
InfluentialSelf-citationMultilayer Silicon Nitride-on-Silicon Integrated Photonic Platform for 3D Photonic Circuits
Sacher, W. D., Yong, Z., Mikkelsen, J. C., Bois, A., Yang, Y., Mak, J. C. C., Dumais, P., Goodwill, D. J., Ma, C., Jeong, J., et al. (2016) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_at.2016.jth4c.3 · Cited by 21 · cited 1×
“offer a path forward in combination with advances in silicon photonics [46].”
Electro-optic Frequency Comb Generation in Ultrahigh-Q Integrated Lithium Niobate Micro-resonators
Zhang, M., Wang, C., Buscaino, B., Shams‐Ansari, A., Kahn, J. M., & Lončar, M. (2018) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_qels.2018.fw3e.4 · Cited by 9 · cited 1×
“and maintain low propagation losses [57].”
Cited by
Ultra-dense optical data transmission over standard fibre with a single chip source
Corcoran, B., Tan, M., Xu, X., Boes, A., Wu, J., Nguyen, T. G., Chu, S. T., Little, B. E., Morandotti, R., Mitchell, A., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16265-x · Cited by 471
Metadata
- Authors
- Torres-Company, V., Schroder, J., Fulop, A., Mazur, M., Lundberg, L., Helgason, O. B., Karlsson, M., & Andrekson, P. A.
- Venue
- Journal of Lightwave Technology
- Published
- 2019-04-01
- Volume
- 37
- Issue
- 7
- Pages
- 1663-1670
- ISSN
- 0733-8724 (ISSN-L)
- 1558-2213
- OpenAlex
- W2914126071
- Cited by
- 178
- References
- 39
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.