The DOI matches its Crossref record.
Design of large deflection electrostatic actuators
Abstract
Electrostatic, comb-drive actuators have been designed for applications requiring displacements of up to 150 μm in less than 1 ms. A nonlinear model of the actuator relates the resonant frequency and the maximum stable deflection to the actuator dimensions. A suite of experiments that were carried out on deep reactive ion etched (DRIE), single-crystal silicon, comb-drive actuators confirm the validity of the model. Four actuator design improvements were implemented. First, a folded-flexure suspension consisting of two folded beams rather than four and a U-shaped shuttle allowed the actuator area to be cut in half without degrading its performance. Second, the comb teeth were designed with linearly increasing lengths to reduce side instability by a factor of two. Third, the folded-flexure suspensions were fabricated in an initially bent configuration, improving the suspension stiffness ratio and reducing side instability by an additional factor of 30. Finally, additional actuation range was achieved using a launch and capture actuation scheme in which the actuator was allowed to swing backward after full forward deflection; the shuttle was captured and held using the backs of the comb banks as high-force, parallel-plate actuators.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrostatic pull-in instability in MEMS/NEMS: A review
Zhang, W.-M., Yan, H., Peng, Z.-K., & Meng, G. (2014) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2014.04.025 · Cited by 570
MEMS actuators and sensors: observations on their performance and selection for purpose
Bell, D. J., Lu, T. J., Fleck, N. A., & Spearing, S. M. (2005) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/15/7/022 · Cited by 399
Review on Micro- and Nanolithography Techniques and their Applications
Pimpin, A., & Srituravanich, W. (2012) · Engineering Journal · doi:10.4186/ej.2012.16.1.37 · Cited by 363
Chiba, K., & Kanamori, Y. (2026) · IEEE Transactions on Terahertz Science and Technology · doi:10.1109/tthz.2026.3683533 · Cited by 1
Metadata
- Authors
- Grade, J. D., Jerman, H., & Kenny, T. W.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2003-06
- Volume
- 12
- Issue
- 3
- Pages
- 335-343
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2133959334
- Cited by
- 226
- References
- 0
- FWCI
- 14.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of large deflection electrostatic actuators. https://app.cochat.ai/papers/10.1109/jmems.2003.811750
- The paper
- Grade, J. D., Jerman, H., & Kenny, T. W. (2003). Design of large deflection electrostatic actuators. Journal of Microelectromechanical Systems. https://doi.org/10.1109/jmems.2003.811750
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.