The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Maximum efficiencies of indoor photovoltaic devices
Abstract
Photovoltaic (PV) converters on the centimeter scale are considered to be the most promising energy supplier for energy-autarkic microsystems in indoor applications, i.e., to power wireless sensor nodes in automated buildings. We provide the first systematic discussion of the optimum material and efficiency limits of indoor photovoltaics. The limiting efficiency η of an ideal photovoltaic converter for various indoor radiation sources and two calculation models ranges between 46% for a fluorescent tube and a bandgap$E_{g}$= 1.95 eV and 67% for a sodium discharge lamp and$E_{g}$= 2.10 eV. The optimal bandgap for typical narrow-band artificial light sources is 1.90–2.00 eV. For$E_{g}$= 2.25 eV, i.e., matched to the photon energy of a monochromatic source emitting at 555 nm, η calculated from the detailed balance model reaches 72.98%. The performance when irradiated by indoor Planckian radiators, such as incandescent bulbs and halogen tubes, is always less than under any solar irradiance. The experimental efficiencies of 11 sample groups with a maximum efficiency of 16%, which were measured with a radiometric indoor characterization setup especially developed for this study, support the theoretically predicted changes in efficiency when compared with efficiencies under the conditions of IEC 60904-3.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Energy Scavenging for Mobile and Wireless Electronics
Paradiso, J. A., & Starner, T. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.9 · Cited by 2,653
Solar cells—Operating principles, technology and system applications
(1982) · Solar Energy · doi:10.1016/0038-092x(82)90265-1 · Cited by 1,724
Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations
Roundy, S., Wright, P. K., & Rabaey, J. M. (2004) · Springer eBooks · doi:10.1007/978-1-4615-0485-6 · Cited by 790
Validation of dynamic RADIANCE-based daylight simulations for a test office with external blinds
Reinhart, C. F., & Walkenhorst, O. (2001) · Energy and Buildings · doi:10.1016/s0378-7788(01)00058-5 · Cited by 730
Energy Harvesting for Autonomous Systems
Beeby, S., & White, N. M. (2010) · Cited by 264
Band gap tuning of a-Si:H from 1.55 eV to 2.10 eV by intentionally promoting structural relaxation
Fukutani, K., Kanbe, M., Futako, W., Kaplan, B., Kamiya, T., Fortmann, C. M., & Shimizu, I. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00022-2 · Cited by 49
Cited by
Technology and Market Perspective for Indoor Photovoltaic Cells
Mathews, I., Kantareddy, S. N., Buonassisi, T., & Peters, I. M. (2019) · Joule · doi:10.1016/j.joule.2019.03.026 · Cited by 567
Cui, Y., Wang, Y., Bergqvist, J., Yao, H., Xu, Y., Gao, B., Yang, C., Zhang, S., Inganäs, O., Gao, F., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0448-5 · Cited by 553
The principles, design and applications of fused-ring electron acceptors
Wang, J., Xue, P., Jiang, Y., Huo, Y., & Zhan, X. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00409-2 · Cited by 454
Emerging Indoor Photovoltaic Technologies for Sustainable Internet of Things
Pecunia, V., Occhipinti, L. G., & Hoye, R. L. Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100698 · Cited by 322
Michaels, H., Rinderle, M., Freitag, R., Benesperi, I., Edvinsson, T., Socher, R., Gagliardi, A., & Freitag, M. (2020) · Chemical Science · doi:10.1039/c9sc06145b · Cited by 315
Metadata
- Authors
- Freunek, M., Freunek, M., & Reindl, L. M.
- Venue
- IEEE Journal of Photovoltaics
- Published
- 2013-01
- Volume
- 3
- Issue
- 1
- Pages
- 59-64
- ISSN
- 2156-3381 (ISSN-L)
- 2156-3403
- OpenAlex
- W2091397418
- Cited by
- 276
- References
- 7
- FWCI
- 3.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Maximum efficiencies of indoor photovoltaic devices. https://app.cochat.ai/papers/10.1109/jphotov.2012.2225023
- The paper
- Freunek, M., Freunek, M., & Reindl, L. M. (2013). Maximum efficiencies of indoor photovoltaic devices. IEEE Journal of Photovoltaics. https://doi.org/10.1109/jphotov.2012.2225023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.