The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Ethernet-Based Real-Time and Industrial Communications
Abstract
Despite early attempts to use Ethernet in the industrial context, only recently has it attracted a lot of attention as a support for industrial communication. A number of vendors are offering industrial communication products based on Ethernet and TCP/IP as a means to interconnect field devices to the first level of automation. Others restrict their offer to communication between automation devices such as programmable logic controllers and provide integration means to existing fieldbuses. This paper first details the requirements that an industrial network has to fulfill. It then shows how Ethernet has been enhanced to comply with the real-time requirements in particular in the industrial context. Finally, we show how the requirements that cannot be fulfilled at layer 2 of the OSI model can be addressed in the higher layers adding functionality to existing standard protocols.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internet time synchronization: the network time protocol
Mills, D. L. (1991) · IEEE Transactions on Communications · doi:10.1109/26.103043 · Cited by 1,859
Ethernet: distributed packet switching for local computer networks
Metcalfe, R. M., & Boggs, D. R. (1983) · Communications of the ACM · doi:10.1145/357980.358015 · Cited by 1,509
Network design consideration for distributed control systems
Lian, F., Moyne, J. R., & Tilbury, D. M. (2002) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.987076 · Cited by 519
Real-time communication and coordination in embedded sensor networks
Stankovic, J. A., Abdelzaher, T. F., Lu, C., Sha, L., & Hou, J. C. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.814620 · Cited by 452
Calculating controller area network (CAN) message response times
Tindell, K., Burns, A., & Wellings, A. (1994) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)45747-8 · Cited by 439
Calculating controller area network (can) message response times
Tindell, K., Burns, A., & Wellings, A. J. (1995) · Control Engineering Practice · doi:10.1016/0967-0661(95)00112-8 · Cited by 420
An upper and lower bound for clock synchronization
Lundelius, J., & Lynch, N. (1984) · Information and Control · doi:10.1016/s0019-9958(84)80033-9 · Cited by 250
Event-triggered versus time-triggered real-time systems
Kopetz, H. (2005) · Springer eBooks · doi:10.1007/bfb0024530 · Cited by 228
Multiple-access protocols and time-constrained communication
Kurose, J. F., Schwartz, M., & Yemini, Y. (1984) · ACM Computing Surveys · doi:10.1145/861.870 · Cited by 174
The cyclic executive model and Ada
Baker, T. P., & Shaw, A. (1989) · Real-Time Systems · doi:10.1007/bf02341919 · Cited by 173
Navet, N., Song, Y., & Simonot, F. (2000) · Journal of Systems Architecture · doi:10.1016/s1383-7621(99)00016-8 · Cited by 160
Probabilistic clock synchronization in distributed systems
Arvind, K. (1994) · IEEE Transactions on Parallel and Distributed Systems · doi:10.1109/71.282558 · Cited by 153
The FTT-ethernet protocol: merging flexibility, timeliness and efficiency
Pedreiras, P., Almeida, L., & Gai, P. (2005) · doi:10.1109/emrts.2002.1019195 · Cited by 131
Supporting real-time traffic on Ethernet
Venkatramani, & Chiueh, T. (1994) · doi:10.1109/real.1994.342706 · Cited by 120
Virtual Time CSMA Protocols for Hard Real-Time Communication
Zhao, W., & Ramamritham, K. (1987) · IEEE Transactions on Software Engineering · doi:10.1109/tse.1987.233512 · Cited by 116
Hard real-time communication in multiple-access networks
Malcolm, N., & Zhao, W. (1995) · Real-Time Systems · doi:10.1007/bf01893145 · Cited by 116
Temporal uncertainties in interactions among real-time objects
Kopetz, H., & Kim, K. H. (2002) · IEEE Symposium on Reliable Distributed Systems (SRDS) · doi:10.1109/reldis.1990.93962 · Cited by 113
Achieving real-time communication over Ethernet with adaptive traffic smoothing
Kweon, S.-K., & Shin, K. G. (2002) · doi:10.1109/rttas.2000.852454 · Cited by 109
The transport layer: tutorial and survey
Iren, S., Amer, P. D., & Conrad, P. T. (1999) · ACM Computing Surveys · doi:10.1145/344588.344609 · Cited by 99
Virtual Time CSMA: Why Two Clocks Are Better than One
Molle, M., & Kleinrock, L. (1985) · IEEE Transactions on Communications · doi:10.1109/tcom.1985.1096402 · Cited by 97
The Ethernet capture effect: analysis and solution
Ramakrishnan, K. K., & Yang, H. (2002) · Conference on Local Computer Networks · doi:10.1109/lcn.1994.386597 · Cited by 97
Switched Ethernet for factory communication
Jasperneite, J., & Neumann, P. G. (2002) · doi:10.1109/etfa.2001.996370 · Cited by 84
EtheReal: a host-transparent real-time Fast Ethernet switch
Varadarajan, S., & Chiueh, T. (2002) · IEEE International Conference on Network Protocols (ICNP) · doi:10.1109/icnp.1998.723721 · Cited by 83
Statistical real-time communication over Ethernet for manufacturing automation systems
Kweon, S.-K., Shin, K. G., & Zheng, Z. (2003) · Proceedings - Real-Time Technology and Applications Symposium · doi:10.1109/rttas.1999.777672 · Cited by 63
Real-time communications over broadcast networks : the CSMA-DCR and the DOD-CSMA-CD protocols
Lann, G. L., & Rivierre, N. (1993) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 63
A real-time upgrade for Ethernet based factory networking
Pritty, D. W., Malone, J. R., Smeed, D., Banerjee, S. K., & Lawrie, N. L. (2002) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.1995.484195 · Cited by 52
Fuzzy traffic smoothing: an approach for real-time communication over Ethernet networks
Carpenzano, A., Caponetto, R., Bello, L. L., & Mirabella, O. (2003) · IEEE International Workshop on Factory Communication Systems (WFCS) · doi:10.1109/wfcs.2002.1159722 · Cited by 45
Comparing real-time communication under electromagnetic interference
Broster, I., & Burns, A. (n.d.) · Cited by 33
Comparing real-time communication under electromagnetic interference
Broster, I., Burns, A., & Rodríguez-Navas, G. (2004) · Euromicro Conference on Real-Time Systems (ECRTS) · doi:10.1109/emrts.2004.1310997 · Cited by 29
The packet starvation effect in CSMA/CD LANs and a solution
Whetten, B., Steinberg, S. G., & Ferrari, D. (2002) · Conference on Local Computer Networks · doi:10.1109/lcn.1994.386599 · Cited by 20
Network access protocol for hard real-time communication systems
Ulusoy, Ö. (1995) · Computer Communications · doi:10.1016/0140-3664(96)81593-3 · Cited by 7
Deterministic protocols for real-time communication in multiple access networks
Norden, S., Balaji, S., Manimaran, G., & Murthy, C. S. R. (1999) · Computer Communications · doi:10.1016/s0140-3664(98)00255-2 · Cited by 7
A CSMA/CD compatible MAC for real-time transmissions based on varying collision intervals
Sharon, O., & Spratt, M. (2001) · Computer Networks · doi:10.1016/s1389-1286(00)00144-4 · Cited by 5
CSMA/CD/TDMA: a dynamic combination for voice and data integration
Chen, W., & Lu, C.-C. (2002) · IEEE Conference on Computer Communications (INFOCOM) · doi:10.1109/infcom.1990.91330 · Cited by 4
A disstributed backoff algorithm to support real-time traffic on ethernet
Gupta, V. (2001) · ACM SIGOPS Operating Systems Review · doi:10.1145/383237.383243 · Cited by 4
Cited by
Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G
Vitturi, S., Zunino, C., & Sauter, T. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2913443 · Cited by 380
The Emergence of Industrial Control Networks for Manufacturing Control, Diagnostics, and Safety Data
Moyne, J. R., & Tilbury, D. M. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.887325 · Cited by 272
The Tactile Internet for Industries: A Review
Aijaz, A., & Sooriyabandara, M. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2018.2878265 · Cited by 169
“State-of-the-art industrial networks are primarily based on fieldbus systems [8] and industrial Ethernet [9] technologies.”
BackgroundHao, W., Yang, T., & Yang, Q. (2023) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2021.3073396 · Cited by 143
Metadata
- Authors
- Decotignie, J.-D.
- Venue
- Proceedings of the IEEE
- Published
- 2005-06
- Volume
- 93
- Issue
- 6
- Pages
- 1102-1117
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2026640816
- Cited by
- 435
- References
- 35
- FWCI
- 25.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.