The DOI matches its Crossref record.
CMOS Interfacing for Integrated Gas Sensors: A Review
Abstract
Modern gas sensor technology is becoming an important part of our lives. It has been applied within the home (monitoring CO levels from boilers), the workplace (e.g., checking levels of toxic gases) to healthcare (monitoring gases in hospitals). However, historically the high price of gas sensors has limited market penetration to niche applications, such as safety in mines or petrochemical plants. The high price may be attributed to several different components: (1) cost of a predominantly manual manufacturing process; (2) need for interface circuitry in the form of discrete components on a PCB; and (3) fireproof packaging, making the cost of gas detection instruments typically many hundreds of dollars. Consequently, there has been a considerable effort over the past 20 years, towards the goal of low-cost ($1-$5) gas sensors, employing modern microelectronics technology to manufacture both the sensing element and the signal conditioning circuitry on a single silicon chip. In this paper, we review the emerging field of CMOS gas sensors and focus upon the integration of two main gas-sensing principles, namely, resistive and electrochemical and associated circuitry by CMOS technology. We believe that the combination of CMOS technology with more recent MEMS processing is now mature enough to deliver the exacting demands required to make low-power, low-cost smart gas sensors in high volume and this should result in a new generation of CMOS gas sensors. These new integrated, mass-produced gas sensors could open up mass markets and affect our everyday lives through application in cars, cell phones, watches, etc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Semiconductor Gas Sensors: Materials, Technology, Design, and Application
Nikolic, M. V., Milovanovic, V., Vasiljevic, Z. Z., & Stamenkovic, Z. (2020) · Sensors · doi:10.3390/s20226694 · Cited by 590
First Fifty Years of Chemoresistive Gas Sensors
Neri, G. (2015) · Chemosensors · doi:10.3390/chemosensors3010001 · Cited by 530
“Metal oxide -based heterostructures for gas sensors”- A review
Zappa, D., Galstyan, V., Kaur, N., Munasinghe Arachchige, H. M. M., Sisman, O., & Comini, E. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.09.020 · Cited by 371
Towards Integrated Mid-Infrared Gas Sensors
Popa, D., & Udrea, F. (2019) · Sensors · doi:10.3390/s19092076 · Cited by 311
Self-citationTowards a Chemiresistive Sensor-Integrated Electronic Nose: A Review
Chiu, S.-W., & Tang, K.-T. (2013) · Sensors · doi:10.3390/s131014214 · Cited by 242
Metadata
- Authors
- Gardner, J. W., Guha, P. K., Udrea, F., & Covington, J. A.
- Venue
- IEEE Sensors Journal
- Published
- 2010-12
- Volume
- 10
- Issue
- 12
- Pages
- 1833-1848
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- OpenAlex
- W2154016282
- Cited by
- 218
- References
- 0
- FWCI
- 8.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CMOS Interfacing for Integrated Gas Sensors: A Review. https://app.cochat.ai/papers/10.1109/jsen.2010.2046409
- The paper
- Gardner, J. W., Guha, P. K., Udrea, F., & Covington, J. A. (2010). CMOS Interfacing for Integrated Gas Sensors: A Review. IEEE Sensors Journal. https://doi.org/10.1109/jsen.2010.2046409
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.