The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Vibration-Based Electromagnetic Energy Harvester Using Mechanical Frequency Up-Conversion Method
Open accessAbstract
This paper presents a new vibration-based electromagnetic energy harvester using a mechanical frequency up-conversion method for harvesting energy from external low-frequency vibrations within a range of 1-10 Hz. The structure consists of a magnet placed on a diaphragm, a polystyrene cantilever carrying a pick-up coil, and a mechanical barrier which converts low-frequency vibrations to a higher frequency, hence increasing the efficiency of the system. The tested structure proved to generate 88.6 mV and 544.7 μW rms power output by up-converting 10-Hz external vibration to 394 Hz. The obtained power density is 184 μW/cm3, with a device volume of 2.96 cm3. An analytical model is developed to analyze the behavior of the energy harvester prototypes with various dimensions. The model predicts the performance parameters of the structures within 5% error range. The effect of scaling down the device dimensions is investigated through the developed model and fabricated prototypes. It is shown that the power density of the energy harvester is increased as its dimensions are scaled down, proving that the proposed structure is a good candidate to be used in low-power wireless microsystems operating at low-frequency vibrations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Cited by
Zi, Y., Guo, H., Wen, Z., Yeh, M.-H., Hu, C., & Wang, Z. L. (2016) · ACS Nano · doi:10.1021/acsnano.6b01569 · Cited by 827
Maamer, B., Boughamoura, A., Fath El-Bab, A. M. R., Francis, L. A., & Tounsi, F. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.111973 · Cited by 297
Metadata
- Authors
- Zorlu, Ö., Topal, E. T., & Kulah, H.
- Venue
- IEEE Sensors Journal
- Published
- 2011-02
- Volume
- 11
- Issue
- 2
- Pages
- 481-488
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- 2379-9153
- OpenAlex
- W2074581832
- Cited by
- 192
- References
- 1
- FWCI
- 18.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Vibration-Based Electromagnetic Energy Harvester Using Mechanical Frequency Up-Conversion Method. https://app.cochat.ai/papers/10.1109/jsen.2010.2059007
- The paper
- Zorlu, Ö., Topal, E. T., & Kulah, H. (2011). A Vibration-Based Electromagnetic Energy Harvester Using Mechanical Frequency Up-Conversion Method. IEEE Sensors Journal. https://doi.org/10.1109/jsen.2010.2059007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.